Description
Overview of HPE 64GB 3200Mhz RAM
The P06036-B21 is a 64 GB memory module from HPE. It is a DDR4 RAM module with a speed of 3200 MHz, which means it is faster than the previous DDR3 type. It has a PC4-25600 classification, which means it has a high data transfer rate of 25,600 MB/s. This RAM module uses 288-pin ECC registered memory chips, which provide error correction and improved memory performance in enterprise-level systems. ECC (Error Correction Code) is a feature that detects and corrects errors that might occur in data storage. The RAM is also registered, which is a type of memory that is intended for use in servers and workstations that require high-density memory and good error-correction capabilities.
Pin Configuration and Form Factor
The P06036-B21 HPE 64GB 3200 MHz memory module has a 288-pin configuration, which means it has 288 connectors or pins on the bottom of the module that connect to the corresponding connectors on the motherboard. These pins are used to transmit data and power to the module. The 288-pin configuration is specific to DDR4 RAM, and is not compatible with earlier DDR3 or DDR2 memory module types.
The form factor of the P06036-B21 memory module is DIMM (Dual In-line Memory Module). DIMM is the most common form factor for desktop and server memory modules. It is a rectangular module with a connector on each side, allowing it to be inserted into a memory slot on the motherboard. The P06036-B21 is a standard size DIMM, so it will fit into any memory slot designed for DDR4 memory modules.
Installation and Setup Instructions
Installing the P06036-B21 HPE 64GB 3200 MHz memory module in a system involves the following basic steps:
- Make sure to power down your system and unplug it from the wall outlet before installing the new memory module.
- Open the computer case, usually by removing screws or thumbscrews and sliding off the side panel.
- Locate the memory slots on the motherboard. These are usually long, narrow slots that are located near the CPU.
- Carefully align the memory module with the memory slot, making sure that the connectors on the bottom of the module match the connectors in the slot.
- Press the module down firmly into the slot, making sure that it is securely seated.
- Close the computer case and reconnect the power cord.
- Power on the system and check the amount of RAM in the system. It should now show the additional memory that you have installed.
- If the system is not recognizing the new memory, you may need to check the memory configuration settings in the BIOS or UEFI firmware settings.
It’s important to note that you should also check the system’s manual and the motherboard’s manual, to be sure of the configuration, voltage, and the number of RAM that is recommended for the system before purchasing the RAM.
General Information of this HPE P06036-B21
- Brand Name: HPE
- Model Number or SKU# P06036-B21
- Type: Memory (RAM)
- RAM Type: Pc4-25600
- Product Name: HPE Smart Memory 64GB-DDR4-DIMM-288-Pin-Registered Memory Module
Technical Information about 64GB DDR4 Ram
- Storage Capacity: 64GB
- Memory Type: DDR4 SDRAM – Dimm 288-Pin
- Number Of Modules: 1 X 64GB
- Memory Speed: 3200mhz (Pc4-25600)
- Features: Dual Rank X4, Registered
- Error Checking: Ecc
- Voltage: 1.2 V
- Latency Timings: Cl22
- Upgrade Type: System Specific
- Device Supported: Server
Physical Characteristics of HPE P06036-B21
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Compatibility of 64GB DDR4 Ram
- Proliant Dl325 Gen10 Plus, Dl385 Gen10 Plus, Dl385 Gen10 Plus Entry
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
