Description
Overview of the HPE 64GB 2666Mhz RAM
P06182-001 is a memory module from HPE that has a capacity of 64GB, which is a large amount of memory that can be used to improve the performance of a computer. The module operates at a speed of 2666 MHz, which is a measure of the rate at which the memory can transfer data. It uses PC4-21300 memory technology, which is a type of DDR4 memory.
ECC (Error Correcting Code) is a type of memory that can detect and correct errors to improve system reliability. The module is registered, which means that it is designed to work with a specific type of memory controller, which can help to improve performance.
The module has a 288-pin form factor, which is the number and arrangement of the pins that connect the module to the motherboard. The module is dual rank, which means it has two sets of memory chips on the module, which can allow for more memory to be installed in a computer.
It is designed to be used in a DDR4 memory slot on a motherboard, which means it is compatible with newer motherboards and systems that support DDR4 memory technology.
Power Efficiency and Heat Dissipation
Power efficiency and heat dissipation are important considerations when it comes to memory modules like P06182-001. Power efficiency refers to how much power the module consumes and how much of that power is actually used to perform useful work. Memory modules that are more power efficient will consume less power, which can help to reduce energy costs and prolong the life of the computer’s power supply.
Heat dissipation refers to how well the module is able to dissipate heat, or remove heat from the module. Memory modules generate heat as a byproduct of their operation, and if the heat is not dissipated properly, it can cause the module to malfunction or even damage the module. Memory modules with good heat dissipation will have a lower operating temperature, which can help to prolong the life of the module.
It is worth noting that specific information regarding power efficiency and heat dissipation of P06182-001 is not available, but in general, DDR4 memory is considered more power-efficient than DDR3 memory because of its lower voltage requirements. And the heat dissipation of the module can be influenced by the cooling solutions that are used in the computer, such as fans and heatsinks, as well as the overall design and layout of the computer’s case.
Installation and Setup Instructions
Installation and setup instructions for P06182-001 HPE 64GB 2666Mhz Pc4-21300 Ecc Reg Dual Rank DDR4 288-Pin Ram will vary depending on the specific computer system it is being installed in. However, in general, the installation process for a memory module is relatively simple and can usually be done by someone with basic computer knowledge.
The first step in installing the memory module is to turn off the computer and unplug it from the power source. This is to ensure that there is no power flowing through the system, which can potentially cause damage to the module or the computer.
Next, locate the memory slots on the motherboard. They are typically located near the CPU (Central Processing Unit) and have a label or icon next to them indicating they are memory slots. It is important to determine the memory configuration before installing the module, such as how many slots are available, how many are occupied, and the type of memory that is already installed.
Once you have located the memory slot, open the retaining clips on either side of the slot by gently pressing down on them. This will allow the module to be inserted into the slot. Carefully align the module with the slot and gently press down on the module until it clicks into place. This will secure the module and make sure that it is properly seated.
After the module is installed, close the retaining clips and power on the computer. The BIOS or UEFI firmware will automatically detect the new memory and update the system memory configuration.
It is also important to check the memory compatibility with the motherboard and the system to ensure the module will function correctly. And it’s always recommended to check the manual or the website of the manufacturer for detailed installation instructions specific to your system.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: P06182-001
- Type: Memory (RAM)
- Sub-Type: PC4-21300
- Product Name: 64GB DDR4 SDRAM Memory Module
Technical Information
- Storage Capacity: 64GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 64GB
- Bus Speed: 2666mhz DDR4-2666/PC4-21300
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: Cl19
- Features: 4rx4
Compatibility
- HPE Proliant Dl325 Gen10
- HPE Dl325 Gen10 Performance
- HPE Dl385 Gen10
- HPE Dl385 Gen10 Base
- HPE Dl385 Gen10 High-performance
- HPE Dl385 Gen10 Solution