Description
Endurance Management and Extended Life
Endurance management and extended life refer to the practices and techniques used to maximize the lifespan and reliability of a solid-state drive (SSD), such as the P10214-K21 HPE 1.92TB NVMe Read Intensive MLC SFF SSD.
To achieve extended life, it is important to minimize write activity on the SSD, as write operations can wear out the flash memory over time and reduce the overall lifespan of the drive. Instead, the drive should be used primarily for read-intensive workloads.
It is also important to regularly monitor the health status of the SSD, as well as perform regular error checks and firmware updates. This can help detect potential issues early on and prevent performance degradation.
Data protection is another key factor in endurance management, as disk failures can cause data loss. Using RAID or other data protection methods can help ensure that your data is safe even if one or more disks fail.
Additionally, storing the drive in a cool, dry place and regularly backing up important data can help prevent potential data loss and protect against other potential issues.
Power Failure Protection and Data Recovery
The P10214-K21 HPE 1.92TB NVMe Lanes Read Intensive MLC SFF SSD provides protection against power failures to help ensure the integrity and reliability of stored data. Here are some of the key features related to power failure protection and data recovery for this drive:
- Power Loss Data Protection: This feature protects against data loss or corruption in the event of an unexpected power failure by using a built-in capacitor to preserve the contents of the drive’s cache memory.
- End-to-end Data Protection: This feature helps protect against data loss or corruption due to errors in the data path, such as a malfunctioning I/O controller or cable.
- Error Correction Code (ECC): The drive uses ECC to detect and correct errors in the stored data, helping to maintain the integrity of the data over time.
- Secure Erase: The drive supports the secure erase feature, which allows for the secure and efficient removal of data from the drive, ensuring that sensitive data is not recoverable.
- RAID: The drive can be used in a redundant array of independent disks (RAID) configuration, which provides additional data protection and recovery options in the event of a drive failure.
It’s worth noting that while these features can help protect against data loss or corruption in the event of power failures or other errors, it’s still important to regularly backup critical data to ensure that it can be recovered in the event of a catastrophic failure.
Embedded and Edge Computing
The P10214-K21 HPE 1.92TB NVMe Lanes Read Intensive MLC SFF SSD can be used in both embedded and edge computing environments. Here are some of the key features and benefits that make it well-suited for these types of deployments:
- Embedded Computing: The small form factor (SFF) design of the drive makes it well-suited for use in compact embedded computing systems, where space is at a premium. The high performance and reliability of the drive can help improve the performance and overall reliability of these systems.
- Edge Computing: In edge computing environments, where computing resources are decentralized and distributed at the edge of a network, the fast data access and low latency of the NVMe interface can help improve the performance of data-intensive edge computing workloads. The high reliability of the drive can also help ensure that these systems are able to operate effectively in challenging edge environments.
- Low Power Consumption: The drive’s use of NAND flash memory and NVMe interface results in lower power consumption compared to traditional hard disk drives (HDDs), making it a more energy-efficient choice for embedded and edge computing deployments, where power consumption is often a critical factor.
General Information
- Manufacturer : HPE
- MPN : P10214-K21
- Spare Part Number: P10466-001
- Model Number: VO001920KWVMT
- Assembly Number: P09769-001
- Type : Internal Solid State Drive (SSD)
- SSD Type : NVMe
Technical Information
- Capacity: 1.92TB
- Form Factor: 2.5 inch SFF
- Interface: NVMe U.2 PCIe
- NAND Flash Memory Type: Multi-Level Cell (MLC)
- Connectivity: Single Port
- Plug Type: Hot Pluggable
- Carrier Type: Smart Carrier NVMe (SCN)
- Workload Type: Read Intensive
- Features: Digitally Signed Firmware (DS), x4 Lanes
- Bundled with: HPE Smart Carrier NVMe (SCN)
- Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
Performance
- Lifetime Writes: 3500
- Endurance DWPD (Drive Writes Per Day): 1.00
- Drive Transfer Rate: PCIe NVMe (External)
- MAX Seq. Reads Throughput (MiB/S): 3400
- MAX Seq. Writes Throughput (MiB/S): 1900
- Random Read Average Latency uSec (4KiB,Q1): 86
- Random Write Average Latency uSec (4KiB,Q1): 29
- Random Read IOPS (4KiB, Q=16): 160000
- Random Write IOPS (4KiB, Q=16): 52000
- MAX Random Read IOPS (4KiB): 720000@Q256
- MAX Random Write IOPS (4KiB): 52000@Q4
Power Consumption
- Idle Time: 6.20 Watt
- Random Read: 10.00 Watt
- Random Write: 10.00 Watt
- Sequential Read: 13.70 Watt
- Sequential Write: 14.90 Watt
- Random Read/Write: 10.00 Watt
- Maximum: 14.90 Watt
Dimensions & Weight
- Height: 5.50 inch (13.97 Cm)
- Width: 7.25 inch (18.41 Cm)
- Depth: 8.75 inch (22.23 Cm)
- Weight: 1.799 lbs (0.82 Kg)
Compatibility
- HPE ProLiant DL Series: DL325 Gen10 (2.5 inch), DL325 Gen10 Base (2.5 inch), DL325 Gen10 Entry (2.5 inch), DL325 Gen10 Performance (2.5 inch), DL325 Gen10 SMB Solution (2.5 inch), DL325 Gen10 Solution (2.5 inch), DL360 Gen10 All Flash Server for Datera (2.5 inch), DL360 Gen10 Entry (2.5 inch), DL360 Gen10 Low (2.5 inch), DL360 Gen10 Network Choice (2.5 inch), DL360 Gen10 Remote Office Branch Office Server for Cohesity DataPlatform (2.5 inch), DL360 Gen10 SMB (2.5 inch), DL360 Gen10 SMB Network Choice (2.5 inch), DL360 Gen10 Solution (2.5 inch), DL380 Gen10 All Flash Server for Datera (2.5 inch), DL380 Gen10 Entry SMB (2.5 inch), DL380 Gen10 for Cohesity DataPlatform (2.5 inch), DL380 Gen10 High Performance (2.5 inch), DL380 Gen10 Hybrid Server for Datera (2.5 inch), DL380 Gen10 Network Choice (2.5 inch), DL380 Gen10 Network Choice for CTERA (2.5 inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (2.5 inch), DL380 Gen10 NVMe All Flash Server for Datera (2.5 inch), DL380 Gen10 Performance (2.5 inch), DL380 Gen10 SMB (2.5 inch), DL380 Gen10 SMB Networking Choice (2.5 inch), DL380 Gen10 Solution (2.5 inch), DL385 Gen10 (2.5 inch), DL385 Gen10 Base (2.5 inch), DL385 Gen10 Entry (2.5 inch), DL385 Gen10 High-Performance (2.5 inch), DL385 Gen10 Performance (2.5 inch), DL385 Gen10 SMB (2.5 inch), DL385 Gen10 Solution (2.5 inch), DL388 Gen10 (2.5 inch), DL560 Gen10 Base (2.5 inch), DL560 Gen10 Performance (2.5 inch), DL580 Gen10 (2.5 inch), DL580 Gen10 Base (2.5 inch), DL580 Gen10 Entry (2.5 inch), DL580 Gen10 Performance (2.5 inch)
- HPE Synergy Series: 480 Gen10 Base Compute Module (2.5 inch), 480 Gen10 Compute Module (2.5 inch), 480 Gen10 Entry Compute Module (2.5 inch), 480 Gen10 Performance Compute Module (2.5 inch), 480 Gen10 Premium Backplane Compute Module (2.5 inch), 480 Gen10 Standard BackPlane Compute Module (2.5 inch), 480 Gen10 w/o Drives Compute Module (2.5 inch), 660 Gen10 Base Compute Module (2.5 inch), 660 Gen10 Compute Module (2.5 inch), 660 Gen10 Entry Compute Module (2.5 inch), 660 Gen10 Performance Compute Module (2.5 inch), 660 Gen10 Premium Compute Module (2.5 inch), 680 Gen9 4S-EX Compute Module (2.5 inch)
