Description
Key Features and Benefits
The HPE 960GB Nvme Mixed Use TLC Digitally Signed Firmware SSD is a high-performance storage solution designed for demanding data center applications. Some of the key features and benefits of this SSD include:
- Mixed Use TLC Technology: This technology ensures a balance between write endurance and read performance, making it suitable for both read-intensive and write-intensive applications.
- Digitally Signed Firmware: This provides an added layer of security and protection against firmware manipulation, ensuring the integrity and reliability of the data stored on the SSD.
- Nvme Interface: The NVMe interface provides faster read and write speeds, allowing for faster access to data and improved overall performance.
- High-Performance Storage: With up to 3,200 MB/s sequential read speed and 3,000 MB/s sequential write speed, this SSD is designed for demanding data center applications that require high-performance storage.
- Reliability and Durability: This SSD is built with robust components and is designed to handle high workloads, ensuring that your data is safe and secure.
- Cost-Effective Storage Solution: With a large storage capacity, this SSD offers a cost-effective storage solution that provides a good balance between cost and performance.
- Compatibility: This SSD is compatible with a range of operating systems and can be easily integrated into your existing infrastructure.
Installation and Setup
The installation and setup process for the P10645-001 HPE 960GB Nvme Mixed Use TLC Digitally Signed Firmware SSD is straightforward and simple. Below are the steps to follow:
- Confirm compatibility: Ensure that your system supports Nvme interface and meets the minimum system requirements for the HPE 960GB Nvme SSD.
- Prepare the system: Disconnect the power supply and any external devices, and back up any important data on your current storage device.
- Remove the existing hard drive: Locate the hard drive bay and remove the screws that secure the hard drive in place.
- Install the HPE 960GB Nvme SSD: Insert the HPE 960GB Nvme SSD into the hard drive bay and secure it with screws. Connect the power and data cables to the SSD.
- Boot up the system: Turn on your computer and enter the system setup to configure the SSD as the primary boot device.
- Install the operating system: Install the operating system on the HPE 960GB Nvme SSD, following the on-screen instructions.
- Optimize performance: Configure the operating system settings to optimize the performance of the HPE 960GB Nvme SSD, such as enabling the TRIM command and disabling write caching.
- Test the SSD: Run diagnostic tests to verify that the HPE 960GB Nvme SSD is working properly and to confirm its performance.
The installation and setup process for the P10645-001 HPE 960GB Nvme Mixed Use TLC Digitally Signed Firmware SSD is simple and straightforward, and can be completed by most users without professional assistance.
Digitally Signed Firmware for Enhanced Security
Digitally signed firmware is a security feature that ensures the authenticity and integrity of the firmware installed on an SSD. In the context of the HPE 960GB Nvme SSD, digitally signed firmware refers to firmware that has been verified and approved by HPE. This verification process confirms that the firmware has not been tampered with or altered in any way, and that it is genuine and trustworthy.
The purpose of digitally signed firmware is to enhance security and prevent unauthorized access or tampering. For example, if a malicious party attempted to install a rogue firmware on the HPE 960GB Nvme SSD, the digitally signed firmware would prevent the installation, as it would not match the signature approved by HPE. This provides an extra layer of protection for sensitive data stored on the SSD, as well as ensuring that the SSD operates optimally and as intended.
In summary, digitally signed firmware for enhanced security is a security feature that provides peace of mind and protects the integrity of data stored on the HPE 960GB Nvme SSD.
Main Information of HPE P10645-001 960GB
- Manufacturer :HPE
- Model Number or SKU# P10645-001
- Device Type: Solid State Drive – Hot-Swap
- Capacity: 960GB
- Form Factor: 2.5 inch SFF
- Interface: NVMe U.2 PCIe
- Plug Type: Hot Pluggable
- Carrier Type: Smart Carrier NVMe (SCN)
- Workload Type: Read Intensive
- Features: Digitally Signed Firmware (DS), x4 Lanes
- Bundled with: HPE Smart Carrier NVMe (SCN)
- Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
- Height: 15.00 mm (0.60 inch)
Performance of SFF SSD
- Lifetime Writes: 876
- Endurance DWPD (Drive Writes Per Day): 0.5
- Drive Transfer Rate: PCIe NVMe (external)
- Random Read IOPS (4KiB, Q=16): 115000
- Random Write IOPS (4KiB, Q=16): 21500
- MAX Random Read IOPS (4KiB): 340000@Q256
- MAX Random Write IOPS (4KiB): 21500@Q1
Expansion And Connectivity of HPE NVME 960GB
- Interfaces: 1 x PCIe NVMe
- Compatible Bay: 2.5 inch SFF
Compatibility of HPE Read Intensive SSD
- HPE ProLiant BL Series: BL460c Gen10 (2.5 inch)
- HPE ProLiant DL Series: DL325 Gen10 (2.5 inch), DL325 Gen10 Base (2.5 inch), DL325 Gen10 Entry (2.5 inch), DL325 Gen10 Performance (2.5 inch), DL325 Gen10 SMB Solution (2.5 inch), DL325 Gen10 Solution (2.5 inch), DL360 Gen10 (2.5 inch), DL360 Gen10 All Flash Server for Datera (2.5 inch), DL360 Gen10 Base (2.5 inch), DL360 Gen10 Entry (2.5 inch), DL360 Gen10 High Performance (2.5 inch), DL360 Gen10 Low (2.5 inch), DL360 Gen10 Network Choice (2.5 inch), DL360 Gen10 Performance (2.5 inch), DL360 Gen10 Remote Office Branch Office Server for Cohesity DataPlatform (2.5 inch), DL360 Gen10 SMB (2.5 inch), DL360 Gen10 SMB Network Choice (2.5 inch), DL360 Gen10 Solution (2.5 inch), DL380 Gen10 (2.5 inch), DL380 Gen10 All Flash Server for Datera (2.5 inch), DL380 Gen10 Base (2.5 inch), DL380 Gen10 Entry (2.5 inch), DL380 Gen10 Entry SMB (2.5 inch), DL380 Gen10 for Cohesity DataPlatform (2.5 inch), DL380 Gen10 High Performance (2.5 inch), DL380 Gen10 Hybrid Server for Datera (2.5 inch), DL380 Gen10 Network Choice (2.5 inch), DL380 Gen10 Network Choice for CTERA (2.5 inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (2.5 inch), DL380 Gen10 NVMe All Flash Server for Datera (2.5 inch), DL380 Gen10 Performance (2.5 inch), DL380 Gen10 SMB (2.5 inch), DL380 Gen10 SMB Networking Choice (2.5 inch), DL380 Gen10 Solution (2.5 inch)
- HPE ProLiant ML Series: ML350 Gen10 (2.5 inch), ML350 Gen10 Base (2.5 inch), ML350 Gen10 Entry (2.5 inch), ML350 Gen10 High Performance (2.5 inch), ML350 Gen10 Performance (2.5 inch), ML350 Gen10 SMB (2.5 inch), ML350 Gen10 Solution (2.5 inch), ML350 Gen10 Special Server (2.5 inch), ML350 Gen10 Sub-Entry (2.5 inch)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
