Description
Applications and use cases
P11057-0A1 HPE RAM is a high-capacity and high-speed memory module that is well-suited for a variety of applications and use cases. Some of the most common applications and use cases include:
- High-performance computing: P11057-0A1 HPE RAM can be used in high-performance computing applications such as scientific simulations, data analysis, and machine learning, where large amounts of data need to be processed quickly.
- Server and enterprise systems: P11057-0A1 HPE RAM can be used in server and enterprise systems to provide large amounts of memory for running multiple applications and services simultaneously. This can help to improve the overall performance and scalability of the system.
- Gaming and video rendering: P11057-0A1 HPE RAM can be used in high-end gaming and video rendering systems, where large amounts of memory are required to support high-resolution textures and advanced physics simulations.
- Virtualization: P11057-0A1 HPE RAM can be used in virtualization environments to provide large amounts of memory for virtual machines, helping to improve the performance and scalability of the virtualization platform.
- Workstations: P11057-0A1 HPE RAM can be used in workstations to provide large amounts of memory for running professional-grade software and applications, such as CAD, 3D modeling, and video editing, which require large amounts of memory to perform well.
Memory capacity and speed
Memory capacity refers to the amount of data that can be stored in a memory module. P11057-0A1 HPE RAM has a memory capacity of 128GB, which is a large amount of memory that can be used to store a large amount of data and applications, allowing the computer or server to perform multiple tasks simultaneously.
Memory speed refers to how quickly the memory can access the data stored in it. P11057-0A1 HPE RAM has a memory speed of 2933 MHz, which is considered to be high-speed RAM. This high speed allows the computer or server to access data stored in the memory quickly, resulting in improved performance and faster processing speeds.
Installation and setup guide
Installing P11057-0A1 HPE RAM into a computer or server can be done by following these steps:
- Power off the computer or server and unplug it from the power source.
- Open the computer or server case by removing the screws and lifting the side panel or access panel.
- Locate the memory slot(s) on the motherboard. These are typically located near the CPU and are labeled as “DIMM” or “RAM” slots.
- Carefully remove any existing RAM modules from the memory slots. These are typically held in place by clips on either side of the slot.
- Carefully align the notches on the P11057-0A1 HPE RAM module with the notches on the memory slot, and gently press the module down into the slot.
- Once the module is securely seated in the slot, the clips on either side of the slot should snap into place, holding the module securely in place.
- Repeat steps 5 and 6 for any additional RAM modules you are installing.
- Replace the computer or server case and secure it with the screws.
- Connect the computer or server to the power source and power it on.
- Once the computer or server has fully booted, check the system properties or the BIOS/UEFI to confirm that the P11057-0A1 HPE RAM has been recognized and that the correct amount of RAM is being displayed.
It’s important to note that the installation process can vary depending on the specific computer or server model and the configuration of the motherboard. If you are not comfortable or familiar with the installation process, it’s best to consult the computer or server’s user manual or seek assistance from a professional.
Memory type and pin configuration
P11057-0A1 HPE RAM is a type of DDR4 SDRAM (Double Data Rate 4 Synchronous Dynamic Random Access Memory). DDR4 is the latest generation of RAM technology that offers higher memory capacity and faster speeds than DDR3. It also offers lower power consumption, which can help to reduce energy costs and prolong the life of the computer or server.
The pin configuration of P11057-0A1 HPE RAM is 288-pin. This is the number of connection points or “pins” that are used to connect the RAM to the motherboard. The 288-pin configuration is the standard for DDR4 RAM, and it is different from the 240-pin configuration used by DDR3 RAM.
General Information of this HPE P11057-0A1
- Brand Name: HPE
- Model Number or SKU# P11057-0A1
- Type: Memory (RAM)
- RAM Type: Pc4-23400
- Product Name: HPE 128GB 1X128GB Octal Rank X4 DDR4-2933
Technical Information about 128GB DDR4 Ram
- Storage Capacity: 128GB
- Memory Type: DDR4 SDRAM Dimm 288-Pin
- Number Of Modules: 1 X 128GB
- Memory Speed: 2933mhz (PC4-23400)
- Features: Octal Rank X4, Load-Reduced Dimm (Lrdimm)
- Voltage: 1.2 V
- Cas Latency: 24-21-21
- Upgrade Type: System Specific
Physical Characteristics of HPE Memory
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Compatibility for 128GB DDR4 Ram
- HPE Proliant Bl460c Blade Servers
- HPE Proliant Xl230k Servers
- HPE Proliant Dl360/Dl380 Servers
- HPE Proliant Ml350 Servers
- HPE Synergy 480 Compute Modules
- HPE Proliant Dl560/Dl580 Servers
- HPE Synergy 660 Compute Modules
- HPE Proliant Apollo 2000 Xl170r/Xl190r/Apollo 4200/Apollo 4500 Xl450/Apollo 6500 Servers
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
