Description
Introduction to 1.92TB NVMe SSD
Features and Benefits of SSD
The HPE P13691-B21 1.92TB NVMe PCI-E Read Intensive SSD is a high-performance storage solution designed for demanding applications that require fast data access and retrieval. Some of the key features and benefits of this SSD are:
- NVMe Technology: The SSD uses the Non-Volatile Memory Express (NVMe) protocol, which is optimized for flash-based storage and provides faster data transfer speeds compared to traditional SATA-based SSDs.
- Read Intensive Design: The HPE P13691-B21 SSD is designed for read-intensive applications, making it ideal for data centers, high-performance computing, and online transaction processing.
- Large Capacity: With a capacity of 1.92TB, the SSD provides ample storage space for large data sets and high-performance applications.
- High Speed: The HPE P13691-B21 SSD provides fast data transfer speeds, with sequential read speeds of up to 3200 MB/s and write speeds of up to 1700 MB/s.
- Low Latency: The NVMe protocol provides low latency, ensuring fast and efficient data access and retrieval.
- Increased Reliability: The HPE P13691-B21 SSD is built with high-quality components and undergoes rigorous testing to ensure its reliability and longevity.
- Energy Efficient: The SSD consumes less power compared to traditional hard drives, making it more energy-efficient and cost-effective in the long run.
- Easy Installation: The SSD is easy to install and configure, and is compatible with a range of HPE hardware and software.
The HPE P13691-B21 1.92TB NVMe PCI-E Read Intensive SSD provides a fast and reliable storage solution for demanding applications, with its high-speed, low-latency, and energy-efficient design.
Installation and Configuration
The HPE P13691-B21 1.92TB NVMe PCI-E Read Intensive SSD is a high-performance storage device designed for read-intensive workloads. Installing and configuring the SSD requires a basic understanding of computer hardware and software. Here is a step-by-step guide to installing and configuring the HPE P13691-B21 SSD:
- Prepare your computer: Before you begin, make sure your computer meets the system requirements for the HPE P13691-B21 SSD. Check the specifications of your motherboard, power supply, and other components to ensure compatibility.
- Open the computer case: Remove the screws from the side panel of the computer case and set it aside. This will give you access to the motherboard and other internal components.
- Insert the SSD: Locate the M.2 slot on the motherboard, insert the HPE P13691-B21 SSD into the slot, and secure it in place with the screw provided.
- Connect power and data cables: Connect the power and data cables to the SSD according to the motherboard specifications. Make sure the connections are secure and free from any damage or corrosion.
- Boot into the BIOS: Restart the computer and press the key to enter the BIOS setup. This key is usually F2, Del, or Esc, and is displayed on the screen during the boot process.
- Configure the boot order: In the BIOS setup, navigate to the boot menu and set the boot order to boot from the HPE P13691-B21 SSD first. This will ensure that the computer boots from the SSD instead of the hard drive.
- Save changes and exit: After making the necessary changes, save the changes and exit the BIOS setup. The computer will restart and boot from the HPE P13691-B21 SSD.
- Install the operating system: If you have a fresh installation, install the operating system on the HPE P13691-B21 SSD. If you are upgrading, clone your existing hard drive to the SSD and make it the boot drive.
- Optimize performance: Finally, optimize the performance of the HPE P13691-B21 SSD by enabling TRIM support and using a suitable file system. You can also use disk defragmentation and disk cleanup tools to keep the SSD running smoothly.
With these steps, you can install and configure the HPE P13691-B21 1.92TB NVMe PCI-E Read Intensive SSD in your computer and experience improved performance and reliability.
General Information about this HPE P13691-B21
- Manufacturer: HPE
- Part Number or SKU# P13691-B21
- Device Type: Solid State Drive Internal
- Sub-Type: PCI-E X4 (NVMe)
Technical Information for 1.92TB Solid State Drive
- Capacity: 1.92TB Storage Device
- Nand Flash Memory Type: Multi-level Cell (MLC)
- Form Factor: M.2 22110
- Features: Digitally Signed Firmware
- Height: 0.1 In
- Drive Writes Per Day (dwpd): 1.36
- Ssd Endurance: 4765 TB
- Internal Data Rate: 3300 MBPS (read) / 1250 MBPS (write)
- 4kb Random Read: 145000 Iops
- Maximum 4kb Random Write: 54500 Iops
- Average Latency: 0.028 Ms
- Interfaces: 1 X PCI-Express X4 (nvme) – M.2 Card
- Compatible Bay: M.2 22110
Product Dimensions & Weight of 2.5 Inch SSD
- Height: 0.6 Inch
- Width: 2.7 Inch
- Depth: 3.9 Inch
- Weight: 0.35 lbs
Power Consumption for PCI-E Solid State Drive
- 2.42 Watt (idle) ¦ 6.27 Watt (random Read) ¦ 6.27 Watt (random Write) ¦ 6.8 Watt (sequential Read) ¦ 6.55 Watt (sequential Write) ¦ 6.8 Watt (maximum)
Compatibility
- Hpe Proliant Bl460c Gen10
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
