Description
Pin Configuration and Compatibility
Pin Configuration and Compatibility refer to the physical and electrical connections between the memory module and the memory slot on the motherboard.
The P18446-B21 HPE 64GB Pc4-21300 2666Mhz Ecc Reg DDR4 SDRAM 288-Pin Dimm Ram has a 288-pin DIMM (Dual In-line Memory Module) form factor. This means that it has 288 connectors or pins on the bottom of the module that make contact with the connectors in the memory slot on the motherboard.
The pin configuration and compatibility of the P18446-B21 module are designed to work with DDR4 (Double Data Rate 4) memory slots that are also 288-pin DIMMs. It also compatible with PC4-21300 memory architecture, which means that it can transfer data at a rate of 21300 million transfers per second.
It is important to check the compatibility of the module with the system’s memory architecture and pin configuration before installation to avoid any damage to the module or the system. It’s recommended to consult with the vendor or the system manufacturer for support if you have any doubts about the compatibility.
Memory Capacity and Speed
Memory Capacity and Speed refer to the amount of memory that can be stored on a memory module and the rate at which data can be transferred to and from that memory.
The P18446-B21 HPE 64GB Pc4-21300 2666Mhz Ecc Reg DDR4 SDRAM 288-Pin Dimm Ram has a memory capacity of 64GB, which means that it can store 64 billion bytes of data. This amount of memory can be used to store programs, applications, and data that are currently in use by the system, as well as to provide a temporary storage area for data that is being processed by the system.
The memory speed of the P18446-B21 module is 2666Mhz, which means that it can transfer data at a rate of 2666 million transfers per second. This is the speed at which data can be transferred between the memory module and the system’s memory controller. The faster the memory speed, the more quickly the system can access the data that is stored in memory, which can result in improved system performance.
It’s important to note that memory speed is often dependent on the system’s memory controller and the memory architecture, so the actual memory speed may vary. It’s recommended to consult with the vendor or the system manufacturer for more information on the memory speed and performance.
Installation and Configuration
Installation and Configuration refer to the process of physically installing the memory module into the memory slot on the motherboard and configuring the system’s settings to properly recognize and utilize the new memory.
The process of installing the P18446-B21 HPE 64GB Pc4-21300 2666Mhz Ecc Reg DDR4 SDRAM 288-Pin Dimm Ram typically involves the following steps:
- Power off the system and unplug the power cord.
- Open the system’s case to access the motherboard.
- Locate the memory slots on the motherboard and determine which slot the new module should be inserted into.
- Carefully align the module with the slot, making sure that the connectors on the bottom of the module match the connectors in the slot.
- Gently press down on the module until it clicks into place.
- Close the system’s case and reconnect the power cord.
- Power on the system and enter the system’s BIOS or UEFI firmware settings.
- Locate the memory settings and ensure that the system recognizes the new memory module and that the memory capacity and speed are correctly displayed.
- Save the changes and exit the BIOS or UEFI settings.
- Boot the system into the operating system and check that the new memory is recognized and being utilized.
It’s important to follow the proper installation procedures and to use caution when handling memory modules to avoid damaging the module or the system. It’s recommended to consult with the vendor or the system manufacturer for detailed instructions and support.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: P18446-B21
- Type: Memory (RAM)
- Sub-Type: PC4-21300
- Product Name: 64GB DDR4 SDRAM Memory Module
Technical Information
- Memory Size: 64GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 64GB
- Chip Organization: X4
- Memory Speed: 2666 Mhz
- Memory Standard: Ddr4-2666/PC4-21300
- Signal Processing: Registered
- Error Checking: Ecc
- Cas Latency: Cl19
- Pin Count: 288-pin
- Voltage: 1.2v
- Form Factor: Lrdimm
Compatibility
- HPE Servers
- Proliant Xl230k Gen10
- Proliant Dl360 Gen10
- Proliant Dl560 Gen10
- Proliant Dl580 Gen10
- Proliant Bl460c Gen10
- Proliant Dl380 Gen10
- Proliant Ml110 Gen10
- Proliant Ml350 Gen10
- HPE Compute Modules
- Synergy 660 Gen10
- Synergy 480 Gen10