Description
Data Backup and Recovery Options
The HPE 1.6TB SAS 24GBPS SC Write Intensive SSD (part number P37178-001) is a solid-state drive (SSD) designed for use in enterprise storage systems. There are several options available for backing up and recovering data on this drive, including:
- Snapshots: This is a feature that allows you to take a point-in-time image of your data, which can be used for recovery in the event of data loss. This can be done using a variety of technologies, such as software-defined storage solutions or hardware-based storage arrays.
- Data Replication: This involves creating multiple copies of your data and storing them in different locations. This can provide a high level of protection against data loss and can be used to recover data in the event of a failure.
- Backup and Restore: This involves creating periodic backups of your data and storing them in a safe location, such as an external hard drive or a cloud-based storage service. In the event of data loss, the backups can be used to restore the data.
- Disk Imaging: This is a process that creates an exact copy of a disk or partition, which can be used to recover data in the event of a failure.
Ultimately, the choice of backup and recovery options will depend on the specific requirements of your environment, including the size and complexity of your data, the level of protection you need, and your budget. You should consider working with a qualified IT professional to determine the best approach for your specific needs.
Power Failure Protection and Data Recovery
The P37178-001 HPE 1.6TB SAS 24GBPS SC Write Intensive SSD is designed to provide protection against power failures and data recovery in the event of a power outage.
To protect against power failures, the SSD uses power-loss protection capacitors that store enough energy to complete any in-flight write operations, which helps prevent data loss. Additionally, the SSD has a power-failure detection mechanism that can identify when the voltage supplied to the drive is out of spec, and automatically triggers the power-loss protection circuit.
In terms of data recovery, the SSD uses advanced error correction algorithms to detect and correct any data errors that may occur during normal operation. In the event of a catastrophic error, the SSD may be able to recover the data using built-in diagnostic and repair mechanisms. Additionally, regular backups and data storage redundancy can also help ensure data recovery in the event of a drive failure.
Interface and Connectivity Options
The HPE 1.6TB SAS 24GBPS SC Write Intensive SSD (part number P37178-001) is a solid-state drive (SSD) that uses the SAS (Serial Attached SCSI) interface for connectivity. SAS is a high-speed data transfer protocol that is commonly used in enterprise storage systems, and it provides a number of advantages over other interfaces, such as higher data transfer speeds, improved reliability, and greater scalability.
In terms of connectivity, the HPE 1.6TB SAS 24GBPS SC Write Intensive SSD uses a SAS connector to connect to the host system. This interface supports data transfer rates of up to 24 GB/s and provides full-duplex communication, allowing for data to be transferred in both directions at the same time. The drive can be used as a standalone device or as part of a larger storage system, and it is compatible with a wide range of SAS-based storage arrays and servers.
Main Information of HPE P37178-001 1.6TB
- Brand Name: HPE
- Model Number or SKU# P37178-001
- Device Type: Solid State Drive – Hot-Swap
- Capacity: 1.6 TB
- Form Factor: 2.5 inch SFF
- Interface: SAS 24Gbps
- NAND Flash Memory Type: Triple-level cell (TLC)
- Connectivity: Dual Port
- Plug Type: Hot Pluggable
- Carrier Type: Smart Carrier (SC)
- Workload Type: Write Intensive
- Features: Digitally Signed Firmware (DS)
- Bundled With: HPE Smart Carrier (SC)
- Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
- Height: 15 mm
Performance about P37178-001 HPE 1.6TB SAS-24GBPS
- Lifetime Writes: 28534
- Endurance DWPD (Drive Writes Per Day): 10.00
- Drive Transfer Rate: 24 Gb/sec (external)
- MAX Seq. Reads Throughput (MiB/s): 1080
- MAX Seq. Writes Throughput (MiB/s): 1035
- Random Read Average Latency uSec (4KiB, Q1): 108
- Random Write Average Latency uSec (4KiB, Q1): 32
- Random Read IOPS (4KiB, Q=16): 135000
- Random Write IOPS (4KiB, Q=16): 245000
- MAX Random Read IOPS (4KiB): 173000@Q64
- MAX Random Write IOPS (4KiB): 130000@Q16
Power Consumption of HPE P37178-001
- Idle Time: 2.98 Watt
- Random Read: 5.77 Watt
- Random Write: 5.77 Watt
- Sequential Read: 7.15 Watt
- Sequential Write: 9.91 Watt
- Random Read/Write: 5.77 Watt
- Maximum: 9.91 Watt
Compatibility about SAS-24GBPS SSD
- HPE Nimble Storage dHCI Medium Solution with HPE ProLiant DL325 Gen10 Plus , Medium Solution with HPE ProLiant DL360 Gen10 , Small Solution with HPE ProLiant DL360 Gen10
- HPE ProLiant DL Series: DL160 Gen10 Base , DL160 Gen10 Entry , DL160 Gen10 SMB , DL180 Gen10 Base , DL180 Gen10 Entry , DL180 Gen10 SMB , DL20 Gen10 , DL20 Gen10 Entry , DL20 Gen10 Performance , DL20 Gen10 solution , DL325 Gen10 , DL325 Gen10 Base , DL325 Gen10 Entry , DL325 Gen10 Performance , DL325 Gen10 Plus , DL325 Gen10 Plus All-NVMe Flash Node for Qumulo , DL325 Gen10 Plus for Weka Expansion Tracking , DL325 Gen10 SMB Solution , DL325 Gen10 Solution , DL360 Gen10 32TB Performance Server for Cohesity DataPlatform , DL360 Gen10 77TB Performance Server for Cohesity DataPlatform , DL360 Gen10 All Flash Server for Datera , DL360 Gen10 All Flash Server for Weka , DL360 Gen10 Compute Server for Cohesity DataPlatform , DL360 Gen10 Low , DL360 Gen10 Network Choice , DL360 Gen10 Network Choice for SAP HANA Compute Block , DL360 Gen10 Performance for Cohesity DataPlatform , DL360 Gen10 Premium , DL360 Gen10 Remote Office Branch Office Server for Cohesity DataPlatform , DL360 Gen10 Server for CTERA , DL360 Gen10 SMB , DL360 Gen10 SMB Network Choice , DL360 Gen10 Solution , DL360 Gen10 Special Server , DL385 Gen10 , DL385 Gen10 High-Performance , DL385 Gen10 Performance , DL385 Gen10 Plus , DL385 Gen10 Plus Entry , DL385 Gen10 SMB , DL385 Gen10 Solution
- HPE ProLiant ML Series: ML350 Gen10 High Performance , ML350 Gen10 SMB , ML350 Gen10 Solution , ML350 Gen10 Special Server
- HPE Synergy 480 Gen10 Compute Module , 480 Gen10 Plus Base Compute Module , 660 Gen10 Compute Block
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
