Description
Endurance Management and Extended Life
The HPE P40472-K21 3.84TB DS SAS-24GBPS Read Intensive Hot Swap SSD is designed for high-performance applications and provides a high level of endurance and reliability. The endurance of an SSD is determined by the amount of data that can be written to the drive over its lifetime, which is measured in terabytes written (TBW).
To extend the life of the HPE P40472-K21 SSD, it is important to understand its workload and usage pattern and to manage it accordingly. Some of the ways to extend the life of the drive include:
- Avoiding excessive writes: Excessive writes to the SSD can cause the drive to wear out faster. It is important to avoid writing large amounts of data to the drive frequently, especially if the data is not frequently accessed.
- Implementing power management: Proper power management helps to reduce the wear and tear on the drive. Power management features, such as putting the drive into a low-power state when not in use, can help to extend the life of the drive.
- Using data compression and deduplication: Data compression and deduplication can help to reduce the amount of data that is written to the drive, which in turn reduces the wear and tear on the drive.
- Using a storage tiering system: Storage tiering systems can help to distribute the data across multiple drives, reducing the wear and tear on any one drive. This can help to extend the life of the drive.
- Implementing error correction and data protection: Error correction and data protection can help to ensure that the data stored on the drive is protected against data loss or corruption, which can help to extend the life of the drive.
Operating System and Driver Support
The HPE P40472-K21 3.84TB DS SAS-24GBPS Read Intensive Hot Swap SSD is a high-performance solid-state drive (SSD) designed for use in server and storage environments. The operating system and driver support for this SSD would depend on the specific hardware platform it is being used with.
In general, HPE servers and storage systems support a wide range of operating systems including Windows, Linux, VMware, and other commonly used operating systems. Additionally, HPE provides device drivers and software support for their products, including the HPE P40472-K21 SSD.
For specific information on operating system and driver support for the HPE P40472-K21 SSD, you should consult the product documentation or contact HPE support. They will be able to provide you with the most up-to-date information on supported operating systems and drivers for your specific configuration.
Embedded and Edge Computing
The HPE P40472-K21 3.84TB DS SAS-24GBPS Read Intensive Hot Swap SSD is well-suited for use in embedded and edge computing environments due to its high performance, reliability, and durability.
Embedded systems are computing systems integrated into other devices or products, while edge computing refers to the practice of processing data at the edge of a network, near the source of the data, rather than sending the data to a central location for processing.
In these environments, the HPE P40472-K21 SSD can be used as a high-speed storage solution for data-intensive applications that require fast access to data, such as real-time data processing and analysis. The high read performance of the drive, along with its hot-swap capability, allows for quick and easy replacement in case of failure, minimizing downtime.
Additionally, the HPE P40472-K21 SSD has a high endurance rating, making it well-suited for use in environments where the drive may be subjected to high levels of write activity. This makes it a good choice for applications that require high write performance, such as logging and data collection.
General Information about this HPE P40472-H21
- Brand Name : HPE
- Part Number or SKU# P40472-K21
- Type: Solid State Drive – SSD
- SSD Type: SAS 24GBPS
Technical Information of HPE 3Terabyte Solid State Drive
- Device Type: Solid State Drive – Hot-Swap
- Capacity: 3.84 TB
- Interface: SAS 24GBPS
- NAND Flash Memory Type: Triple-level cell (TLC)
- Workload Type: Read Intensive
- Plug Type: Hot Pluggable
- Connectivity Type: Dual
- Carrier Type: Basic Carrier (BC)
- Form Factor: 2.5 inch SFF
- Bundled with: HPE Basic Carrier (BC)
- Platform Supported: HPE ProLiant Rack
- Features: Digitally Signed Firmware (DS)
Dimensions & Weight of this 24 GBPS SSD
- Height: 5.75 inch
- Width: 8.63 inch
- Depth: 9.00 inch
- Weight: 1.10 lbs
Compatibility Information
HPE ProLiant DL Series: DL20 Gen10 Plus (2.5inch), DL20 Gen10 Plus Base (2.5inch), DL20 Gen10 Plus Entry (2.5inch), DL20 Gen10 Plus High Performance (2.5inch), DL20 Gen10 Plus Performance (2.5inch), DL325 Gen10 Plus V2 (2.5inch), DL325 Gen10 Plus V2 Base (2.5inch), DL325 Gen10 Plus V2 for Weka Base Tracking (2.5inch), DL325 Gen10 Plus V2 Performance (2.5inch), DL345 Gen10 Plus (2.5inch), DL345 Gen10 Plus Base (2.5inch), DL345 Gen10 Plus Entry (2.5inch), DL360 Gen10 Plus (2.5inch), DL360 Gen10 Plus All-NVMe Server for Software Defined Storage (2.5inch), DL360 Gen10 Plus for Weka Base Tracking (2.5inch), DL360 Gen10 Plus Network Choice (2.5inch), DL365 Gen10 Plus (2.5inch), DL380 Gen10 Plus (2.5inch), DL380 Gen10 Plus Network Choice (2.5inch)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
