Description
Storage Capacity and Reliability
The HPE P47326-K21 3.84TB SATA 6GBPS SC SSD offers a large storage capacity of 3.84TB, making it ideal for demanding data center applications that require significant storage space. This high-capacity SSD provides enough space for storing large amounts of data, such as databases, virtual machines, and multimedia files.
As for reliability, the HPE P47326-K21 SSD is designed to meet the highest standards of performance and durability. It features advanced technologies, such as error correction code (ECC) and a wear-leveling algorithm, which helps ensure that data is stored and retrieved accurately. Additionally, the SSD’s built-in protection against power failures helps prevent data loss in the event of a sudden power outage.
HPE also provides a limited warranty and technical support, ensuring that customers can rely on the SSD for their critical data storage needs.
Energy Efficiency of 1.92TB SSD
The HPE P47326-K21 3.84TB SATA 6GBPS SC SSD is designed with energy efficiency in mind. The 1.92TB variant of this SSD has low power consumption, which helps to reduce the overall energy consumption of the system and minimize the heat generated.
This is achieved through the use of advanced power management techniques, such as DevSleep and L1.2 power states, which allow the SSD to consume very little power when idle and significantly reduce the amount of energy needed to transfer data. Additionally, the SSD has an active power draw of less than 4 watts, making it one of the most energy-efficient SATA SSDs on the market.
Furthermore, the HPE P47326-K21 SSD uses NAND flash memory, which is known for its low power consumption compared to other forms of storage. The NAND flash memory is also coupled with an efficient controller that optimizes the use of energy, further reducing the power consumption of the SSD.
The energy efficiency of the 1.92TB HPE P47326-K21 SATA SSD helps to lower energy costs, reduce heat generation, and prolong the life of the system components. This makes it an ideal choice for data center applications that require high storage capacity, fast performance, and energy efficiency.
Installation and Setup
The installation and setup of the HPE P47326-K21 3.84TB SATA 6GBPS SC SSD are straightforward and simple. Here are the steps to follow for a successful installation:
- Prepare the server system: Before installing the SSD, make sure that the server system is compatible with the SATA 6GBps interface and has enough space to accommodate the drive.
- Power off the server system: To avoid any damage to the SSD or the server system, power off the server system and disconnect all cables.
- Install the SSD: Locate the SATA interface on the server system, remove the existing drive, if any, and insert the HPE P47326-K21 SSD into the SATA interface. Secure the SSD in place with the screws provided.
- Connect the cables: Connect the SATA and power cables to the SSD and the server system, respectively.
- Power on the server system: Once the cables are connected, power on the server system.
- Initialize the SSD: Once the server system boots up, initialize the SSD using the server’s built-in storage management software. This will format the SSD and create a new partition for the operating system to use.
- Install the operating system: After initializing the SSD, install the operating system on the new partition. The installation process is the same as for a regular hard drive.
- Verify the installation: After the operating system is installed, verify that the SSD is recognized by the server system and that it is working correctly.
General Information about this HPE P47326-K21
- Part Number or SKU# P47326-K21
- Manufacturer: HPE
- Interface: SATA 6GBPS
- Type: Solid State Drive
Key Features 3.84TB SSD
- NAND Flash Memory Type: Triple-level cell
- Plug Type: Hot Pluggable
- Capacity: 3.84TB SSD
- Carrier Type: Smart Carrier
- Workload Type: Mixed Use
- Connectivity: Single Port
- Bundled with: HPE Smart Drive Carrier
- Features: Digitally Signed Firmware
Performance for SATA 6GBPS Solid State Drive
- Drive Transfer Rate: 600 MBPS
- Random Read Average Latency uSec (4KIB,Q1): 107
- Random Write Average Latency uSec (4KIB,Q1): 48
- MAX Random Read IOPS (4KiB): 74000@Q32
- MAX Random Write IOPS (4KiB): 45000@Q32
- Random Read IOPS (4KiB, Q=16): 66K
- Random Write IOPS (4KiB, Q=16): 43K
Product Dimensions & Weight
- Height: 0.63 inch
- Width: 3.10 inch
- Depth: 5.45 inch
- Weight: 1.50 lbs
Compatibility Information
- HPE ProLiant BL Series: BL460c (Gen10)
- HPE ProLiant DL Series: DL20 (Gen10) DL60 (Gen10) DL80 (Gen10) DL160 (Gen10) DL360 (Gen10) DL380 (Gen10) DL385 (Gen10 Gen10+) DL388 (Gen10) DL560 (Gen10) DL580 (Gen10)
- HPE ProLiant ML Series: ML110 (Gen10) ML350 (Gen10)
- HPE ProLiant XL Series: XL230k (Gen10)
- HPE Synergy Systems: D3940 Storage Module
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
