Description
Reliability and Durability
The P49029-K21 HPE 960GB DS SAS SSD is designed to provide reliable and durable storage for your critical data. The drive features advanced error correction and wear-leveling technology, which help to prevent data corruption and extend the lifespan of the drive.
In addition, the P49029-K21 HPE 960GB DS SAS SSD is designed to be highly reliable, with a mean time between failures (MTBF) of 2 million hours. This high level of reliability helps to ensure that your data is always available when you need it, reducing downtime and improving overall system uptime.
The drive is also designed to be highly durable, with an endurance rating of 1 DWPD (drive writes per day) for five years. This high endurance rating helps to ensure that the drive can withstand the demands of even the most write-intensive workloads, providing a long-lasting and reliable storage solution.
The P49029-K21 HPE 960GB DS SAS SSD is also designed to be highly secure, with support for Secure Erase and SANITIZE, which allow you to securely erase data from the drive when it is no longer needed. This helps to ensure that confidential information is not accessible to unauthorized individuals, even if the drive is repurposed or disposed of.
Advanced Features
The P49029-K21 HPE 960GB DS SAS SSD features a number of advanced features that help to improve performance, data protection, and overall system efficiency. Some of the key advanced features of this drive include:
- Multi-level cell (MLC) NAND flash memory: The drive features MLC NAND flash memory, which provides higher density and lower cost per gigabyte than traditional single-level cell (SLC) NAND flash memory.
- End-to-end data protection: The drive features end-to-end data protection, which helps to prevent data corruption and ensure the reliability of your data.
- Wear-leveling technology: The drive features advanced wear-leveling technology, which helps to extend the lifespan of the drive by evenly distributing data writes across all blocks of the NAND flash memory.
- Support for TRIM and UNMAP: The drive supports the TRIM and UNMAP commands, which help to maintain the performance of the drive over time by freeing up space that is no longer in use.
- Advanced power management: The drive features advanced power management features, including support for DevSleep and Power-on in Standby (PoS), which help to reduce power consumption during idle periods.
- Error correction: The drive features advanced error correction technology, which helps to prevent data corruption and ensure the reliability of your data.
SAS Interface
The HPE P49029-K21 is a 960GB DS SAS (dual-port, 12Gb/s SAS) SSD with a read-intensive performance profile. This drive supports the 24Gb/s SAS interface and is compatible with multiple vendor systems. The “BC” in the product name stands for “Broad Compatibility” and indicates that it has been tested and optimized to work well in a variety of different systems. The “DS” in the product name stands for “dual-port, 12Gb/s SAS”, indicating that it has two SAS ports to provide maximum data transfer rates and redundancy. The “Read Intensive” performance profile means that the drive is optimized for workloads that require high levels of read performance, such as big data analytics, data warehousing, and other applications that rely heavily on read operations.
Ordering and Deployment Information
The HPE P49029-K21 SSD can be ordered directly from HPE or through authorized resellers and distributors. When deploying the drive, it’s important to follow the manufacturer’s guidelines for proper installation and to make sure the system’s firmware and drivers are up to date. It’s also recommended to use a SAS host bus adapter (HBA) that supports the 24Gb/s SAS interface. Properly configuring the storage system and operating system, as well as verifying that the system meets the minimum requirements for the SSD, will ensure optimal performance and reliability.
General Information about this HPE P49029-K21
- Manufacturer: HPE
- Part Number or SKU# P49029-K21
- Type: Solid State Drive (SSD)
- SSD Type: SAS-24GBPS
Technical Information of 960GB Solid State Drive
- Device Type: Solid State Drive – Hot-Swap
- Capacity: 960 GB
- Form Factor: 2.5 inch SFF
- Interface: SAS 24Gbps
- NAND Flash Memory Type: Triple-level cell (TLC)
- Plug Type: Hot Pluggable
- Connectivity Type: Dual Port
- Carrier Type: Basic Carrier (BC)
- Workload Type: Read Intensive
- Bundled with: HPE Basic Carrier (BC)
- Features: Digitally Signed Firmware (DS)
- Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
- Height: 15.00 mm (0.60 inch)
Performance for SAS 24GBPS SSD
- Lifetime Writes (TB): 1712
- Endurance DWPD (Drive Writes Per Day): 1
- Drive Transfer Rate: 24 Gbps (external)
- MAX Seq. Reads Throughput (MiB/s): 2030
- MAX Seq. Writes Throughput (MiB/s): 1280
- Random Read Average Latency uSec (4KiB,Q1): 90
- Random Write Average Latency uSec (4KiB,Q1): 26
- Random Read IOPS (4KiB, Q=16): 155000
- Random Write IOPS (4KiB, Q=16): 65000
- MAX Random Read IOPS (4KiB): 17400@Q64
- MAX Random Write IOPS (4KiB): 65000@Q4
Product Dimensions & Weight
- Height : 0.63 inch
- Width : 3.10 inch
- Depth : 5.45 inch
- Weight : 1.50 lbs
Compatibility
- HPE ProLiant DL Series: DL20 Gen10 Plus (2.5inch), DL20 Gen10 Plus Base (2.5inch), DL20 Gen10 Plus Entry (2.5inch), DL20 Gen10 Plus High Performance (2.5inch), DL20 Gen10 Plus Performance (2.5inch), DL325 Gen10 Plus V2 (2.5inch), DL325 Gen10 Plus V2 Base (2.5inch), DL325 Gen10 Plus V2 for Weka Base Tracking (2.5inch), DL325 Gen10 Plus V2 Performance (2.5inch), DL345 Gen10 Plus (2.5inch), DL345 Gen10 Plus Base (2.5inch), DL345 Gen10 Plus Entry (2.5inch), DL360 Gen10 Plus (2.5inch), DL360 Gen10 Plus All-NVMe Server for Software Defined Storage (2.5inch), DL360 Gen10 Plus for SAP HANA Compute Block (2.5inch), DL360 Gen10 Plus for Weka Base Tracking (2.5inch), DL360 Gen10 Plus Network Choice (2.5inch), DL365 Gen10 Plus (2.5inch), DL380 Gen10 Plus (2.5inch), DL380 Gen10 Plus Network Choice (2.5inch), DL385 Gen10 Plus V2 (2.5inch), DL385 Gen10 Plus V2 Base (2.5inch), DL385 Gen10 Plus V2 Entry (2.5inch)
- HPE SimpliVity 325 Gen10 Plus V2 Node (2.5inch)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
.jpg)
