Description
Overview of theHMA84GL7AFR4N-VK Hynix 32GB RAM
The HMA84GL7AFR4N-VK Hynix 32GB DDR4 memory module is a high-performance and reliable memory solution designed for use in computer systems. This memory module is designed to provide fast and stable data access, improved overall system performance, and a high level of data protection and integrity.
Some key features and specifications of the HMA84GL7AFR4N-VK memory module include:
- 32GB of DDR4 memory with a speed of 2666MHz.
- PC4-21300 CL19, providing improved memory performance and increased memory bandwidth.
- Error Correction Code (ECC) and registered design for improved data protection and reliability.
- 288-pin configuration for improved memory density and faster data access.
- Load Reduced Dual In-line Memory Module (LRDIMM) form factor, reducing signal noise and improving stability.
- 1.2V operating voltage, helping to reduce power consumption and improve energy efficiency.
Power Efficiency and Energy Savings
The HMA84GL7AFR4N-VK Hynix 32GB DDR4 memory module is designed with power efficiency and energy savings in mind.
Low Operating Voltage: This memory module operates at a voltage of 1.2V, which is lower than traditional DDR3 memory modules, which typically operate at 1.5V. This lower voltage helps to reduce the power consumption of the memory module, which can result in improved energy efficiency and reduced power costs.
Load Reduced Design: The HMA84GL7AFR4N-VK memory module features a Load Reduced Dual In-line Memory Module (LRDIMM) form factor, which helps to reduce signal noise and improve signal integrity. This improved signal integrity can result in improved memory performance and reduced power consumption.
Installation and Setup Instructions
Installing and setting up the HMA84GL7AFR4N-VK Hynix 32GB DDR4 memory module is a straightforward process. Below are the general steps you should follow to install and set up this memory module:
- Determine Compatibility: Ensure that your computer system is compatible with this memory module, including the number of memory slots available, memory type, and operating voltage. You can find this information in your computer’s manual or by contacting the manufacturer.
- Power Off Your System: Before installing any hardware components, it is important to power off your system and unplug all cables to prevent any damage.
- Open the Computer Case: Locate the release lever or latch to open the computer case, following the instructions in your computer manual.
- Locate the Memory Slots: Locate the memory slots on your motherboard, usually located near the CPU socket. Ensure that the memory slots are clear and free from any dust or debris.
- Align the Memory Module: Align the notches on the memory module with the keys in the memory slot.
- Insert the Memory Module: Gently insert the memory module into the slot, pressing down firmly until the clips on either side of the slot click into place.
- Power On Your System: Power on your system and enter the BIOS or UEFI setup utility to verify that the memory module has been recognized and to set up the correct configuration.
- Operating System Configuration: Install the necessary drivers and configure the memory settings in your operating system, if necessary.
These are general steps and the exact steps may vary depending on your computer system. It is recommended to follow the manufacturer’s instructions and guidelines for installing memory modules.
General Information
- Manufacturer: Sk Hynix
- Manufacturer Part Number: Hma84gl7afr4n-Vk
- Product Name: 32gb Ddr4 Sdram Memory Module
Technical Information
- Storage Capacity: 32gb
- Memory Technology: Ddr4 Sdram
- Number Of Modules: 1 X 32gb
- Bus Speed: 2666mhz Ddr4-21300/Pc4-2666v
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: Cl19
- Rank Features: 2rx4