Description
Overview of the 00E7600 IBM 2.5inch Caddy
The 00E7600 IBM 2.5inch Caddy is a drive tray that is designed to hold and mount 2.5-inch SAS or SATA hard drives in certain IBM server models, such as the X3850 S812l and S822l. This caddy allows for easy installation and removal of hard drives, and supports hot-swapping, meaning that a drive can be replaced without shutting down the system. The caddy is also designed to provide optimal cooling and airflow to the installed hard drive to ensure proper operation.
Features and Specifications of the 00E7600 IBM 2.5inch Caddy
- Compatible with 2.5-inch SAS or SATA hard drives
- Supports hot-swapping for easy drive replacement
- Designed for use in IBM X3850 S812l and S822l server models
- Provides optimal cooling and airflow for installed hard drive
- Constructed of durable materials for long-term use
- Can hold one hard drive
- Dimensions: 3.5 x 2.5 x 0.5 inches (8.9 x 6.4 x 1.3 cm)
- Weight: 0.15 lbs (0.07 kg)
- IBM part number: 00E7600
Note: Please double check the above information with the IBM website or manual before proceeding with any purchase as the information might not be accurate and subject to change.
Installation instructions for the 00E7600 IBM 2.5inch Caddy
The installation process for the 00E7600 IBM 2.5inch Caddy will vary slightly depending on the specific server model it is being installed in, however, the general steps are as follows:
- Power off the server and unplug it from the power source.
- Open the server’s cover and locate the empty drive bay where the caddy will be installed.
- Carefully slide the caddy into the empty bay until it clicks into place.
- Install the hard drive into the caddy, making sure to properly align the connectors.
- Secure the hard drive to the caddy using the screws provided.
- Close the server’s cover and plug the server back into the power source.
- Power on the server and wait for it to boot up.
- Check the server’s BIOS or RAID controller to confirm that the new drive has been detected and is properly configured.
Note: It is important to follow the manufacturer’s instructions and guidelines for installing the caddy and hard drive to ensure proper operation and to avoid damaging the equipment.
General Information
- This Tray Is Compatible With IBM X3850 S812l S822l X3250 X3550 M5/M6
