Description
Advanced Security Features of Switch
The EX4200-48T is a layer 3 Ethernet switch made by Juniper Networks. It has 48 ports and is stackable, meaning it can be connected to other EX4200 switches to increase the number of ports and create a single, managed network. The switch is L3 managed, meaning it can route traffic between different networks and subnets. It also has advanced security features, such as access control lists and virtual private network (VPN) support, to help protect your network from unauthorized access and other security threats. Additionally, the switch support for advanced features such as redundancy protocols like VRRP and multicast protocols like PIM.
Powerful Performance
The EX4200-48T Juniper Layer 3 Ethernet Switch is designed to provide powerful performance for your network. It is built with advanced hardware and software features that allow it to handle large amounts of traffic and provide fast data transfer between devices connected to the switch.
The switch is powered by Juniper’s advanced JUNOS operating system, which is optimized for high-performance networking. The JUNOS OS provides a wide range of routing protocols, including OSPF and BGP, to help optimize the flow of traffic through your network. Additionally, it also supports advanced features such as Quality of Service (QoS) and Virtual LANs (VLANs) which can help prioritize and segment network traffic for better performance.
The switch also supports stacking, which allows multiple switches to be connected together to create a single, high-performance backbone for your network. This allows for even greater bandwidth and increased connectivity between devices. The switch also supports advanced redundancy protocols such as VRRP, which ensures that your network stays up and running even in case of a hardware failure.
The switch also supports IPv6 which provides a larger address space, and it also provides more security features.
High-Speed Connectivity
The EX4200-48T Juniper Layer 3 Ethernet Switch is designed to provide high-speed connectivity for your network. Each of its 48 ports supports Gigabit Ethernet speeds, allowing for fast data transfer between devices connected to the switch. Additionally, the switch supports stacking, which allows multiple switches to be connected together to create a single, high-speed backbone for your network. This allows for even greater bandwidth and increased connectivity between devices.
The switch also supports advanced features such as Link Aggregation Control Protocol (LACP) and Virtual Chassis technology, which allows for the creation of highly-available and highly-scalable network topologies. This ensures that your network can handle high-speed data transfer and large amounts of traffic without any issues.
Furthermore, the switch also supports Jumbo frames (frames larger than the standard Ethernet frame size) which can increase the maximum transfer unit (MTU) size, leading to a higher throughput of the network.
General Information EX4200-48T Juniper Layer 3 SwitchManufacturer: Juniper
MPN: EX4200-48T
Type : Networking Switch
Switch Type: 48 Ports L3 Managed Stackable Switch
SKU: EX4200-48T
Technical InformationEnclosure Type : Desktop 1U
Ports : 48 X 10/100/1000
Power Over Ethernet (Poe) : Yes
Mac Address Table Size : 24K Entries
Max Units In A Stack : 10
Routing Protocol : Ospf, Is-IS, RIP-1, RIP-2, BGP, IGMPV2, IGMP, VRRP, PIM-SM, Static IP Routing, IGMPV3, Policy-Based Routing (PBR)
Remote Management Protocol : SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, RMON, SNMP 3, HTTP, HTTPS, SSH-2
Encryption Algorithm : MD5, TLS, PEAP, TTLS
Compliant Standards : IEEE 802.1D, IEEE 802.1Q, IEEE 802.1P, IEEE 802.3AF, IEEE 802.3AD (LACP), IEEE 802.1W, IEEE 802.1X, IEEE 802.1S, IEEE 802.1AB (LLDP)
Processor : Powerpc : 1 GHZ
RAM : 1 GB
Flash Memory : 1 GB Flash
Built-In Devices : Status LCD
Status Indicators : LCD Display
Expansion / ConnectivityInterfaces : 1 X Management 8 X 10base-T/100base-Tx/1000base-T RJ-45 POE Network Stack Device : 40 X 10base-T/100base-Tx/1000base-T RJ-45
Expansion Slot(S) : 1 (Total) / 1 (Free) X Expansion Slot
Power:Power Device : Power Supply Hot-Plug / Redundant
Installed Qty : 1 (Installed) / 2 (Max)
Voltage Required : AC 120/230 V
Power Consumption Operational : 320 Watt.
