Description
Installation and Compatibility
The Micron MTFDKCC12T8TGJ-1BC1ZAB 9400 Max is a PCIe NVMe solid-state drive that is designed to be installed in a 2.5-inch Small Form Factor (SFF) drive bay. It is important to note that this drive uses a U.2 connector, which is different from the more common SATA and M.2 connectors.
To install the Micron MTFDKCC12T8TGJ-1BC1ZAB 9400 Max, you will need a system that supports PCIe NVMe drives with a U.2 connector. Most modern enterprise-class servers and workstations support this type of drive, but it is always best to check your system’s specifications before purchasing and installing the drive.
Once you have verified that your system supports the Micron MTFDKCC12T8TGJ-1BC1ZAB 9400 Max, you can install the drive as you would any other 2.5-inch drive. Make sure to follow the manufacturer’s instructions carefully to ensure that the drive is properly connected and secured in the drive bay.
After installation, you will need to initialize and format the drive using your operating system’s disk management tools. This will prepare the drive for use and allow you to start storing data on it.
Security and Data Protection
The Micron MTFDKCC12T8TGJ-1BC1ZAB 9400 Max features several security and data protection measures to ensure the integrity and confidentiality of your data:
- End-to-end data protection: The drive includes advanced error correction and detection capabilities, as well as power-loss protection, to help ensure the integrity of your data. These features work together to prevent data corruption or loss in the event of unexpected power outages or other system failures.
- AES-256 encryption: The drive also includes hardware-based AES-256 encryption, which provides strong protection for your data. AES-256 encryption is a widely used and trusted encryption standard that is used by governments, financial institutions, and other organizations to protect sensitive data.
- Secure boot: The Micron 9400 Max supports Secure Boot, which ensures that the system can only boot from trusted firmware, drivers, and operating systems. This helps protect against malicious software and other security threats.
- TCG Opal 2.01 support: The drive supports Trusted Computing Group (TCG) Opal 2.01, a standard for self-encrypting drives that provides an additional layer of data protection. TCG Opal 2.01 enables the use of a pre-boot authentication password, which is required to access the drive’s data. This helps prevent unauthorized access to your data, even if the drive is lost or stolen.
Features and Benefits
The Micron MTFDKCC12T8TGJ-1BC1ZAB 9400 Max is a high-capacity, high-performance solid-state drive (SSD) that offers a number of features and benefits, including:
- High storage capacity: With a storage capacity of 12.8 terabytes (TB), the Micron 9400 Max is ideal for use in enterprise-class applications that require large amounts of storage.
- High performance: The drive features a PCIe NVMe 3.0 x4 interface that delivers fast data transfer rates and low latency, making it an ideal choice for applications that require high performance.
- Advanced NAND flash memory technology: The Micron 9400 Max uses advanced Triple-Level Cell (TLC) NAND flash memory technology, which allows each memory cell to store three bits of data. This results in higher storage density and lower cost per gigabyte than other types of NAND flash memory.
- End-to-end data protection: The drive features advanced error correction and detection capabilities, as well as power-loss protection, to help ensure the integrity and reliability of your data.
- Temperature monitoring and throttling: The Micron 9400 Max includes temperature sensors that monitor the drive’s operating temperature and adjust performance as needed to prevent overheating.
- Easy installation and compatibility: The drive is designed to be installed in a 2.5-inch Small Form Factor (SFF) drive bay and uses a U.2 connector, which is compatible with most modern enterprise-class servers and workstations.
Specifications
- Brand Name : Micron
- Product Series : 9400 Max
- Part Number : MTFDKCC12T8TGJ-1BC1ZAB
- Type : Internal Solid State Drive
Technical Information
- Capacity : 12.8TB
- Interface : Pcie Gen4 1×4 Nvme (v1.4)
- Form Factor : U.3 15mm Pcie (nvme)
- Nand Flash Memory Type : MICRON 176-layer 3d Tlc Nand
- Performance7 (4k Random128k Sequential) :
- Sequential Read : 7000 Mbps
- Sequential Write : 7000 Mbps
- Random Read : 1,600,000 Iops
- Random Write : 600,000 Iops
- 70/30 Random Read/write : 940,000 Iops
- Endurance (total Bytes Written In Tb):
- 4k Random: 70,080
- 128k Sequential: 143,100
Reliability
- Mixed-use, 3 Drive Write Per Day
- Mttf: 2,000,000 Hours
Environmental Characteristics
- Power Consumption(average, Watts,rms9):
- 128k Seq. Read : 16
- 128k Seq. Write : 21
- 4k Rand. Read : 19
- 4k Rand. Write : 24
- 4k Rand. 70/30 Read/write : 20
- Operating Temp : 0-70°c
Product Dimensions & Weight
- Height: 0.6 inch
- Width: 2.7 inch
- Depth: 3.9 inch
- Weight: 0.35 lbs
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
