Description
Output Voltage and Power Capabilities
The PWR-2700-DC/4 Cisco 2700 WATT DC Power Supply has the following output voltage and power capabilities:
- Output voltage: -48 VDC
- Output power: 2700W
- Efficiency: 92%
- Maximum output current: 56.25A
- Total output power: -130.5V DC
It is important to note that this power supply is only compatible with the Cisco 7600 series routers and is not compatible with other Cisco router models. It is important to check the specific power requirements of the router model you are using to ensure compatibility and use it within the limits of the power supply.
Operating Temperature and Humidity Range
The PWR-2700-DC/4 Cisco 2700 WATT DC Power Supply has the following operating temperature and humidity range:
- Operating temperature: -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
- Operating humidity: 10 to 90% non-condensing
It is important to note that this power supply is only compatible with the Cisco ASR 9000 series routers and is not compatible with other Cisco router models. Additionally, it is important to check the specific power requirements of the router model you are using to ensure compatibility. It is also important to make sure that the power supply is installed in a location with proper ventilation to prevent overheating.
It is also recommended to check the environmental specifications of the router it is being used with, to confirm if the operating temperature and humidity range are in the same range, to avoid any issues that could arise from the mismatch of the environmental range.
Installation and Configuration
Installing and configuring the PWR-2700-DC/4 Cisco 2700 Watt DC Power Supply can be done in the following steps:
- Unpack the power supply and check for any damage.
- Make sure that the power supply is compatible with your router.
- Turn off the power to the router.
- Remove the existing power supply from the router by disconnecting the power cables and unmounting the power supply from the router.
- Install the new PWR-2700-DC/4 power supply by connecting the power cables and mounting the power supply in the router.
- Turn on the power to the router and check the power supply status in the router’s command-line interface (CLI) using the “show power” command.
- Configure the power supply settings in the router’s CLI using the “power inline” command.
It is important to note that the specific installation and configuration steps may vary depending on the router model. It is recommended to consult the Cisco documentation for the specific router model for detailed installation and configuration instructions.
Key Information for this Cisco PWR-2700-DC/4
- Manufacturer: Cisco
- Part Number or SKU # PWR-2700-DC/4
- Product Name: 2700W Redundant DC power supply
- Product Type: Proprietary Power Supply
Technical Information of DC Power Supply
- Holdup Time 8 ms Minimum
- Reliability
- MTBF 150000 Hour
Power Description of Proprietary Power Supply
- Input Voltage Type DC
- Input Voltage -60 V DC
- Input Voltage Range -48 V DC to -60 V DC
- Output Power 2.70 kW
Miscellaneous
- Compatibility
- Cisco Catalyst 6504-E Chassis
