Description
Performance and Reliability of 600 Watt Power Supply
The PWR-C6-600WAC Cisco 600 Watt AC Power Supply is a high-performance and reliable power supply designed for use in data center and network environments. It has a power output of 600 watts, meaning it can provide up to 600 watts of power to connected devices. This power supply is hot-swappable, meaning it can be replaced without shutting down the system or disrupting operations.
This power supply is designed to meet the high-availability and energy-efficient requirements of data center and network environments. It provides protection against over-current, over-voltage, and over-temperature conditions to ensure the reliability of the connected devices. Additionally, it is also designed to provide power supply redundancy with the use of two power supplies in the same device.
The PWR-C6-600WAC Cisco 600 Watt AC Power Supply is also Energy Star compliant, meaning it meets energy efficiency standards set by the Environmental Protection Agency (EPA). This helps to reduce energy consumption and costs, while also reducing the environmental impact.
In terms of compatibility, the PWR-C6-600WAC Cisco 600 Watt AC Power Supply is compatible with a range of Cisco devices, including the Cisco 4451-X, 4331, and 4321 ISRs. It also meets safety and regulatory standards, such as UL, CE, and FCC compliance.
Installation and Setup of Power Supply
The installation and setup of the PWR-C6-600WAC Cisco 600 Watt AC power supply involves the following steps:
- Verify compatibility: Make sure the power supply is compatible with the Cisco device that you want to install it into.
- Physical installation: Install the power supply into the device by inserting it into the designated slot and securing it with screws.
- Power-up: Connect the power cables to the power supply and turn on the device.
- Verify operation: Check the device’s power supply status to ensure that it is functioning properly. This can usually be done through the device’s management interface.
Troubleshooting and Maintenance of AC Power Supply
Troubleshooting:
- Power Supply Not Turning On: Check the power cord and ensure that it is securely connected to the power supply and the electrical outlet. Also, check the electrical outlet to ensure it is working.
- Power Supply Not Providing Enough Power: Check if the power supply is connected to a surge protector and try connecting it directly to the electrical outlet. Also, check if the power supply is compatible with the device it is connected to and if it is providing the right amount of power.
- Power Supply Overheating: Check the air vents on the power supply to ensure that they are not blocked and that the power supply is placed in a well-ventilated area. If the overheating persists, it may be a hardware issue and the power supply may need to be replaced.
Maintenance:
- Regular Cleaning: Regularly clean the air vents on the power supply to prevent dust buildup and to ensure proper airflow.
- Replace Components: If any components within the power supply are damaged, replace them immediately to avoid further damage to the power supply.
- Store Properly: Store the power supply in a cool and dry place, away from direct sunlight and moisture.
- Check Connections: Regularly check the connections between the power supply and the device it is connected to, ensuring that they are secure and functioning properly.
- Regularly Test: Regularly test the power supply to ensure that it is functioning correctly and providing the right amount of power.
Key Information about Cisco PWR-C6-600WAC AC Power Supply
- Manufacturer: Cisco
- Model Number or SKU# PWR-C6-600WAC
Technical Information of Cisco Switching Power Supply
- Wattage : 600 Watt
- Type : Ac
- Compatibility: For Cisco Catalyst 9200
