Description
Memory Configuration: Dual Rank, ECC
The Samsung M378A2K43CB1-CRC DDR4 SDRAM has a memory configuration of dual rank and ECC.
Dual rank memory modules have two sets of memory chips that can be accessed simultaneously, allowing for faster data access and improved performance compared to single rank memory modules. Dual rank memory modules are particularly useful in applications that require high-speed data processing, such as gaming, video editing, and scientific computing.
ECC, or Error Correction Code, is a type of memory technology that detects and corrects errors in memory. ECC is particularly important in mission-critical applications such as servers, workstations, and embedded systems, where even a single error can cause significant data loss or system crashes.
ECC memory works by adding an extra bit to each byte of memory, which allows the system to detect and correct errors. While ECC memory is slightly slower than non-ECC memory, its reliability and error correction capabilities make it a critical component in many high-end computing systems.
Memory Size and Speed: 16GB, 2400MHz
The Samsung M378A2K43CB1-CRC DDR4 SDRAM has a memory size of 16GB and a speed of 2400MHz.
Memory size refers to the amount of memory that is available on the module. In this case, the M378A2K43CB1-CRC module has a capacity of 16GB, which is a high-capacity memory module that is suitable for demanding applications such as video editing, scientific computing, and gaming.
Memory speed, measured in megahertz (MHz), refers to the rate at which data can be transferred to and from the memory module. The M378A2K43CB1-CRC module has a speed of 2400MHz, which is a high-speed memory module that can support high-bandwidth applications and data-intensive tasks.
Installation and Configuration of Samsung M378A2K43CB1-CRC DDR4 SDRAM
Installation and configuration of the Samsung M378A2K43CB1-CRC DDR4 SDRAM is a straightforward process that can be completed in a few simple steps. Here are the basic steps for installing and configuring this memory module:
- Power off the system: Before installing or removing any hardware components, it is important to power off the system and disconnect it from the power source.
- Locate the memory slots: The memory slots are typically located near the processor socket on the motherboard. Refer to the motherboard documentation to locate the memory slots.
- Prepare the memory module: Remove the memory module from its packaging and handle it carefully by holding the edges. Avoid touching the gold contacts on the bottom of the module.
- Install the memory module: Align the notch on the memory module with the notch on the memory slot, and gently push the module down until it clicks into place. Apply gentle pressure to both sides of the module until it is securely in place.
- Power on the system: Reconnect the system to the power source and power it on. The system should automatically detect the new memory module and configure it to work with the existing memory.
- Verify installation: Once the system has booted up, verify that the memory module is recognized by the system. This can be done by checking the system properties or using a system information tool.
- Configure memory settings: If necessary, configure the memory settings in the system BIOS or UEFI to ensure optimal performance. Refer to the motherboard documentation for instructions on configuring memory settings.
General Information
- Manufacturer: Samsung
- Manufacturer Part Number: M378A2K43CB1-CRC
- Type: Memory (RAM)
- Sub-Type: PC4-19200
- Product Name: 16GB 2400MHZ DDR4 SDRAM Memory Module
- Product Type: Ram Module
Technical Information
- Memory Size: 16GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 16GB
- Memory Speed: 2400 Mhz
- Memory Standard: DDR4-2400/PC4-19200
- Signal Processing: ECC
- Ram Features: Dual Rank
- Cas Latency Timings: Cl17
- Voltage: 1.35v
