Description
Operating Temperature and Power Consumption
The operating temperature range of the Toshiba THNSF8200CCSE 200GB Mix Use MLC SATA-6GBPS 512N Hot Plug Swap Solid State Drive is 0°C to 70°C. This means that the drive can operate in a variety of environments and is suitable for use in both data center and enterprise applications.
In terms of power consumption, the Toshiba THNSF8200CCSE has a maximum power consumption of 4.7 watts during read/write operations and 2.2 watts during idle periods. This low power consumption helps to reduce energy costs and also makes the drive suitable for use in systems with limited power budgets, such as laptops and mobile devices.
It’s worth noting that actual power consumption may vary depending on factors such as system configuration, workload, and environmental conditions.
Endurance and Reliability Features
The Toshiba THNSF8200CCSE 200GB Mix Use MLC SATA-6GBPS 512N Hot Plug Swap Solid State Drive has several endurance and reliability features, making it a suitable choice for demanding enterprise applications.
Firstly, it uses MLC (Multi-Level Cell) NAND flash memory, which provides a balance between performance, endurance, and cost. MLC NAND can store multiple bits of data per cell, which allows for higher capacities and faster read/write speeds than SLC (Single-Level Cell) NAND, while still offering good endurance.
Additionally, the drive supports SMART (Self-Monitoring, Analysis, and Reporting Technology), which allows the drive to monitor its own health and report any potential issues. This can help to detect and prevent data loss before it occurs.
The drive also has a built-in error correction mechanism that helps to detect and correct data errors that may occur during read/write operations. This helps to ensure data integrity and reduces the risk of data corruption.
Finally, the Toshiba THNSF8200CCSE has a hot plug swap feature, which means it can be added or removed from a system without having to shut down the entire system. This can be particularly useful in data center environments where downtime must be minimized.
Hot Plug and Swap Capabilities
The Toshiba THNSF8200CCSE solid-state drive (SSD) features hot plug and swap capabilities, which allow for the drive to be easily installed and removed while the system is still running. This is particularly useful in data center environments where downtime must be minimized.
Hot plug and swap capabilities mean that the drive can be removed or inserted without having to power down the entire system. The drive can be hot swapped, which means it can be removed and replaced with another drive without requiring a reboot or any interruption to system operation. This can be particularly useful for replacing a failed drive in a RAID array without having to shut down the system.
It’s important to note that hot plug and swap capabilities require support from the system hardware and software. This means that the system’s motherboard or RAID controller must support hot plug and swap, and the operating system must also support this feature.
General Information about this Toshiba THNSF8200CCSE
- Manufacturer : Toshiba
- Mfg Part Number : THNSF8200CCSE
Technical Information
- Device Type: Solid State Hot Plug
- Capacity : 200 GB
- Form Factor : 2.5inch
- Interface : SATA 6GB/S
- Drive Transfer Rate : 600 Mbps
- Features : Advanced Format 512n, Mixed-use
Expansion & Connectivity
- Interfaces : 1 X SATA 6 Gb/s
- Compatible Bays : 1 X Hot-swap -2.5