General Information
Manufacturer : HPE
Manufacturer Part Number : P39123-B21
Type: Server
Sub-Type: PROLIANT DL385
Hot-swap Bays Qty: 8
Processor / Chipset
Cpu : Amd Epyc 7513 / 2.6 GHz
Max Turbo Speed : 3.65 GHz
Number Of Cores : 32-Core
Cpu Qty : 1
Max Cpu Qty : 1
Cpu Upgradability : Upgradable
Cpu Socket : Socket SP3
Cache Memory
Installed Size : L3 Cache - 128 MB
Cache Per Processor : 128 MB
Ram
Installed Size : 32 GB / 1 TB (MAX)
Technology : DDR4 Sdram
Effective Memory Speed : 3200 MHz
Rated Memory Speed : 3200 MHz
Memory Specification Compliance : PC4-25600
Form Factor : Dimm 288-PIN
Slots : 32 (total) / 31 (Empty)
Features : Registered, HPE Smartmemory
Configuration Features : 1 X 32 GB
Ram Supported : Registered, 8-channel Memory Architecture, Hpe Smartmemory, Slots 17 - 32 Are Available In Two-processor Configuration Only
Hard Drive
Type : NO HDD
Storage & Storage Controller
Type : 1 X Raid
Controller Interface Type : SAS 12GB/S
Storage Controller Name : Hpe Smart Array P408i-a Sr Gen10
Channel Qty : 8
Raid Level : Raid 0, Raid 1, Raid 5, Raid 6, Raid 10, Raid 50, Raid 60
Buffer Size : 2 GB
Optical Storage
Type : No Optical Drive
Graphics Controller
Video Memory : 16 MB
Video Interfaces : VGA
Network & Communication
Ethernet Ports : 2 X 10 Gigabit Ethernet
Data Link Protocol : 10 Gigabit Ethernet
Remote Management Protocol : Snmp 3, Smash Clp
Features : Wake On Lan (wol), Pxe Support
Expansions & Connectivity
Expansion Bays Total (Free) :
8 (total) / 8 (free) X Hot-swap 2.5 SFF
Expansion Slots Total
1 (total) / 1 (free) X Pcie 4.0 X16 - Full-length, Full-height (x16 Mode)
1 (total) / 1 (free) X Pcie 4.0 X16 - Low-profile (x16 Mode)
1 (total) / 0 (free) X Pcie 4.0 X16 / Open Compute Project Mezzanine (Ocp) 3.0
Interfaces & Ports
1 X VGA
1 X Hpe Ilo
1 X Hpe Ilo (1 In Front) (Service Port)
4 X Usb 3.1 Gen 1 (1 Front, 2 Rear, 1 Internal)
2 X Lan (10gigabit Ethernet)
Miscellaneous
Included Accessories : 4 Standard Fans, Lff Easy Install Rai
Compliant Standards : Aes, Triple Des, Tls V1.2, Ashrae Class A4, Ashrae Class A3, Weee 2002/95/ec, Acpi 6.1, Redfish Api, Uefi, Smbios 3.1
Power Device
Device Type : Power Supply
Power Redundancy : Optional
Power Redundancy Scheme : 1+1 (With Optional Power Supply)
Installed Qty : 1
Max Supported Qty : 2
Voltage Required : AC 120/230 V (50/60 Hz)
Power Provided : 800 WATT
Dimensions & Weight
Width : 17.5 IN
Depth : 29.5 IN
Height : 3.4 IN
Weight : 33.29 LBS
About New Bulk Pack Products
Server - ProLiant DL385
Since HPE has released this DL385 server, the extraordinary speed, performance, and enhanced security needs are no more a problem. HPE's Silicon Root Technology has outclassed all other competitors. AMD's system, along with the trusted architecture, works as the cherry on top. The EPYC processor support not only validates the firmware but enhances the overall efficacy of the system. There are many other integration options available in this server, taking care of the encryption and security. All in all, the manufacturer claimed to provide you an immersive experience with this DL385 which your traditional server fails to provide. Also, the HP Proliant DL385 brings a 50% cut on cost when compared with the other. We, at ALLHD, have brought you a diverse range of HP Proliant DL385 gen 8, including the Opteron, EPYC 2.2GHz, and AMD.
HPE ProLiant DL385 Gen8 supports the AMD Chipset:
HPE's DL385 Gen8 is backed up by the AMD EPYC 7000 series architecture, which can support 32 cores without any hassle. Not just this, but there has been a huge improvement from 32MB to 64MB in the L3 cache from the predecessors, depending on the type of processor. EPYC technology also holds the ability to perform well with the PCIe lanes and more memory channels to support multitasking on the go.
Intel Xeon's Scalable Processor along with the Multi-Channel Memory:
AMD EPYC chipset architecture is not just confined to the processor but the memory channels as well. It can support up to eight memory channels compared to the six channels as supported by the previous generation. HPE DL385 Gen8 comes equipped with 32 memory slots for the two processors. Thus, in this dual-processor configuration, a single one holds the ability to tackle and manage the 16 slots along with two modules per channel. The HPE DL385 has an overall speed capacity of 2666 MHz which can be conjugated with a suitable pair of processors and a smart module memory chip. What's noteworthy is the HPE Smart Memory Module can support up to 4TB of memory. However, there is one drawback for the HPE DL385 is that the NVDIMMs are not yet supported.
Multitude Storage Option Open Ways:
There are plenty of storage options available for this server's chassis, making it an ideal choice for tech-savvies and professionals. The HP ProLiant DL385 supports SAS, SATA HDDs, SSDs, and even the NVMe drives. The manufacturer is pleased to announce that this ProLiant server supports the 12 bay LFF and 8-bay LFF chassis.
You can buy the range of HP ProLiant DL385 from ALLHDD in the following sub-categories: Opteron 2.1GHz, Opteron 2.4GHz, EPYC 2.1GHz, EPYC 3.2GHz, and Opteron 2.6GHz.
Why buy from ALLHDD?
ALLHDD has been a choice for many tech-savvies when buying the most trusted and reliable networking and server equipment. Our experts have compiled the full range of DL385 g8 to help you enjoy virtualization for your business.
