Samsung MZPLJ1T6HBJR 1.6TB PCI-E SSD PM1735 Series TLC NVMe New

The MZPLJ1T6HBJR PM1735 Series is a high-performance Solid State Drive (SSD) that offers a storage capacity of 1.6 Terabytes (TB). This SSD is designed using Triple Level Cell (TLC) technology, which provides excellent performance and endurance. The SSD comes in a Peripheral Component Interconnect Express (PCI-E) 4.0 x8 Non-Volatile Memory Express (NVMe) Add-In Card form factor, making it suitable for use in high-performance computing systems. The PM1735 Series SSD is manufactured by Samsung, a leading manufacturer of computer hardware and electronics.

Triple Level Cell (TLC) technology is a type of NAND Flash memory that allows three bits of data to be stored per cell. This technology offers a higher storage density compared to Single Level Cell (SLC) and Multi-Level Cell (MLC) technologies, which can only store one and two bits of data per cell, respectively. TLC technology is commonly used in high-capacity SSDs as it offers a lower cost per bit compared to SLC and MLC technologies.

The PM1735 Series SSD comes in a PCI-E 4.0 x8 Non-Volatile Memory Express-NVMe Add-In Card form factor. The PCI-E interface is a high-speed serial bus that is used to connect peripheral devices, such as graphics cards, network adapters, and storage devices, to a computer's motherboard. The PCI-E 4.0 x8 interface provides a maximum bandwidth of 32 gigabytes per second (GB/s), which is twice the bandwidth provided by the previous generation PCI-E 3.0 interface. The NVMe interface is a high-performance, low-latency storage protocol that is designed to take advantage of the high-speed PCI-E interface. The NVMe protocol provides faster data transfer speeds compared to the older Advanced Host Controller Interface (AHCI) protocol used by traditional SATA-based SSDs.

The (Half-Height Half-Length) form factor is a standard form factor used for Add-In Card SSDs. This form factor allows the SSD to be easily installed in a PCIe slot on a computer's motherboard. The PM1735 Series SSD is a full-length card, which means it is longer than a typical card.

The Samsung MZPLJ1T6HBJR PM1735 Series boasts an impressive 1.6TB storage capacity, positioning it as a robust solution for enterprises grappling with vast amounts of data. The Triple Level Cell (TLC) technology employed in this SSD further enhances its storage density, ensuring that organizations can efficiently manage their growing data needs.

Beyond sheer capacity, the drive's performance is a standout feature. Leveraging the PCI-E 4.0 x8 interface, it capitalizes on high-speed data transfer, significantly outpacing its predecessors. This makes the PM1735 an ideal choice for applications demanding swift data access, such as database management, data analytics, and content creation.

At the heart of the Samsung MZPLJ1T6HBJR PM1735 Series lies the Non-Volatile Memory Express (NVMe) technology. This protocol optimizes the communication between the storage device and the system's CPU, eliminating bottlenecks and unleashing unprecedented speeds. With NVMe, data transfer occurs at an accelerated pace, enhancing overall system responsiveness and reducing latency.

The enterprise-grade NVMe implementation in the PM1735 not only ensures rapid data access but also improves the efficiency of data-intensive tasks. This translates to a more agile and responsive computing environment for businesses relying on time-sensitive processes.

Enterprise-level applications demand storage solutions that can withstand high-intensity workloads over prolonged periods. The Samsung MZPLJ1T6HBJR PM1735 Series rises to this challenge with a focus on reliability and endurance.

The drive incorporates advanced error correction mechanisms, ensuring the accuracy of stored data. Additionally, wear-leveling algorithms distribute write and erase cycles evenly across the SSD, mitigating the risk of premature wear on specific cells. This robust design makes the PM1735 well-suited for mission-critical applications where data integrity and longevity are non-negotiable.

The PM1735 Series SSD is designed for use in high-performance computing systems that require high endurance and reliability. The SSD is rated for up to 1 drive write per day (DWPD), which means it can withstand 1 full drive write per day for the entire warranty period without experiencing any failures. The SSD also features advanced error correction and wear-leveling algorithms, which help to extend the lifespan of the drive and ensure data integrity.

Enterprise storage solutions demand a high level of reliability, and the PM1735 Series rises to the occasion. Samsung has integrated advanced error correction mechanisms into the SSD, mitigating the risk of data corruption and ensuring the integrity of stored information. This is crucial for industries where data accuracy and consistency are non-negotiable.

Security is a top priority in enterprise storage, and the PM1735 Series incorporates features to safeguard sensitive data. Encryption is a key component, with support for hardware-based encryption ensuring that data is protected at rest. This is especially critical for industries with stringent compliance requirements, such as healthcare, finance, and government.

Enterprises are constantly expanding their data storage requirements. The PM1735 Series addresses this need for scalability by leveraging the PCI-E 4.0 x8 interface. As storage needs grow, businesses can seamlessly scale their storage infrastructure by incorporating additional PM1735 Series SSDs, providing a flexible and future-proof solution.

The PM1735 Series SSD offers excellent performance, thanks to its TLC technology and NVMe interface. The SSD has a sequential read speed of up to 8,000 megabytes per second (MB/s) and a sequential write speed of up to 3,800 MB/s. These speeds are significantly faster compared to traditional SATA-based SSDs, which typically have sequential read and write speeds of around 500 MB/s to 600 MB/s.

The SSD also offers excellent random read and write performance, which is important for applications that require quick access to small files. The PM1735 Series SSD has a random read speed of up to 1.5 million Input/Output Operations per Second (IOPS) and a random write speed of up to 320,000 IOPS.

The robust features of the Samsung MZPLJ1T6HBJR PM1735 Series position it as a versatile storage solution suitable for various applications. Its large storage capacity, high-speed interface, and enterprise-grade reliability make it particularly well-suited for:

Enterprises dealing with massive datasets, such as those in data analytics, artificial intelligence, and scientific research, can benefit from the PM1735 Series' expansive storage capacity and high-speed data transfer capabilities.

In virtualized environments where multiple virtual machines are hosted on a single physical server, the PM1735 Series' fast data access and transfer speeds contribute to efficient virtual machine operations.

Database-intensive applications, including online transaction processing (OLTP) systems and data warehouses, can leverage the PM1735 Series for quick and reliable data retrieval and storage.

In the enterprise landscape, responsiveness is paramount. The NVMe protocol, coupled with the PCI-E 4.0 x8 interface, significantly reduces latency, ensuring that applications access data with minimal delay. Whether it's transactional databases, virtualized environments, or data analytics workloads, the low latency of the PM1735 Series contributes to an efficient and smooth user experience.

• Manufacturer: Samsung
• Part Number or SKU# MZPLJ1T6HBJR
• Product Type: Solid State Drive (SSD)
• Interface: PCI-E 4.0 x8

• Storage Capacity: 1.6TB
• Form Factor: PCI-E Card

• Drive Writes Per Day (DWPD): 3
• Sequential Read: 7000 MBPS
• Sequential Write: 2400 MBPS
• Random Read: 1000K Iops
• Random Write: 200K Iops

In summary, the Samsung MZPLJ1T6HBJR PM1735 Series represents a leap forward in storage technology, combining high capacity, speed, and reliability. As enterprises continue to grapple with escalating data demands, having a storage solution that can meet and exceed these requirements is paramount. The PM1735 Series, with its 1.6 Terabytes of TLC storage, PCI-E 4.0 x8 interface, NVMe technology, and Enterprise Add-In Card form factor, emerges as a compelling choice for those seeking cutting-edge storage solutions. Whether deployed in data-centric enterprises, virtualization environments, database management systems, or content creation workflows, this SSD stands poised to shape the future of storage, offering a glimpse into the possibilities of what modern storage technology can achieve.