This Part, P04175-002, is the Hewlett Packard Enterprise (HPE) Manufacturer Part Number (MPN) for the product named HPE 800GB SAS 12GBPS 2.5-inch Small Form Factor (SFF) Triple-Level Cell (TLC) Digitally Signed Firmware (DS) Smart Carrier (SC) Dual Port Hot-Pluggable Write Intensive (WI) Solid State Drive (SSD) For HPE ProLiant Generation8, Generation9 and Generation10 Servers (New Factory Sealed With 3 Years HPE Warranty).
Hardware performance is required for any Data center's Computer, Networks, and Storages. HPE Write Intensive Solid State Drives (SSDs) are recognized for their reliability, high efficiency, and overall services. This is obviously the best SSD, suitable for the HPE ProLiant Servers and Write- Intensive Workloads. HPE Digitally Signed Firmware is capable of resisting malware viruses and spam from malicious attacks and Its Smart Carrier proactively alerts against data loss when removing a drive which helps to enable a more balanced system design for improved performance, and greater reliability.
This Solid State Drive (SSD) is available in 6.4TB of capacity, 2.5-inch Small Form Factor (SFF), Digitally Signed Firmware, Smart Carrier, The Latest SAS 12GBPS interface, and come in a variety of capacity features to satisfy an extended range of specifications for Wite-Intensive workloads. It has sequential reads of up to 1075 MiB/s, sequential writes of up to 1030 MiB/s, random reads of up to 109,000 IOPS, and random writes of up to 120,000 IOPS. This has provided a fast-to-access data transfer rate for excellent services. Overall, HPE Brand is a cost-effective and fully controllable storage solution for Enterprise businesses and data centers.
However, HPE Write Intensive SSD is the best choice for your servers to reduce the cost of your data center. This Product is New Factory Sealed with 3 Years HPE Warranty and it's expanded by the server warranty coverage. For Best Brand value and service HPE is a most favorite name. You can be satisfied with these services
General Information
Manufacturer: HPE
MPN: P04175-002
Product Type: Solid State Drive
SKU: P04175-002
Technical Information
Capacity: 800 GB
Form Factor: 2.5-inch SFF
Interface: SAS 12Gbps
NAND Flash Memory Type: Triple-level cell (TLC)
Plug Type: Hot Pluggable
Connectivity Type: Dual
Carrier Type: Smart Carrier (SC)
Workload Type: Write Intensive
Bundled with: HPE SmartDrive Carrier (SC)
Features: Digitally Signed Firmware (DS)
Drive Performance
Random Reads: 109000 IOPS
Random Writes: 120000 IOPS
Sequential Reads: 1075 MBPS
Sequential Writes: 1030 MBPS
Product Dimensions & Weight
Height: 0.63 inch
Width: 3.10 inch
Depth: 5.45 inch
Weight: 1.50 lbs
Compatibility
HPE ProLiant DL Series: DL180 Gen10 (2.5 inch), DL180 Gen10 Entry (2.5 inch), DL180 Gen10 SMB (2.5 inch), DL325 Gen10 (2.5 inch), DL325 Gen10 Base (2.5 inch), DL325 Gen10 Entry (2.5 inch), DL325 Gen10 Performance (2.5 inch), DL325 Gen10 Plus (2.5 inch), DL325 Gen10 Plus All-NVMe Flash Node for Qumulo (2.5 inch), DL325 Gen10 SMB Solution (2.5 inch), DL325 Gen10 Solution (2.5 inch), DL360 Gen10 All Flash Server for Weka (2.5 inch), DL360 Gen10 Compute Server for Cohesity DataPlatform (2.5 inch), DL360 Gen10 Low (2.5 inch), DL360 Gen10 Network Choice (2.5 inch), DL360 Gen10 Remote Office Branch Office Server for Cohesity DataPlatform (2.5 inch), DL360 Gen10 SMB (2.5 inch), DL360 Gen10 SMB Network Choice (2.5 inch), DL360 Gen10 Solution (2.5 inch), DL380 Gen10 All Flash Server for Datera (2.5 inch), DL380 Gen10 Entry SMB (2.5 inch), DL380 Gen10 for Cohesity DataPlatform (2.5 inch), DL380 Gen10 for SAP HANA Compute Block (2.5 inch), DL380 Gen10 Hybrid Server for Datera (2.5 inch), DL380 Gen10 Network Choice (2.5 inch), DL380 Gen10 Network Choice for CTERA (2.5 inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (2.5 inch), DL380 Gen10 Server for CTERA (2.5 inch), DL380 Gen10 SMB (2.5 inch), DL380 Gen10 SMB Networking Choice (2.5 inch), DL380 Gen10 Solution (2.5 inch), DL385 Gen10 (2.5 inch), DL385 Gen10 Base (2.5 inch), DL385 Gen10 Entry (2.5 inch), DL385 Gen10 High-Performance (2.5 inch), DL385 Gen10 Performance (2.5 inch), DL385 Gen10 Plus (2.5 inch), DL385 Gen10 Plus Entry (2.5 inch), DL385 Gen10 SMB (2.5 inch), DL385 Gen10 Solution (2.5 inch), DL388 Gen10 (2.5 inch), DL580 Gen10 (2.5 inch), DL580 Gen10 Base (2.5 inch), DL580 Gen10 Entry (2.5 inch), DL580 Gen10 Performance (2.5 inch)
HPE ProLiant ML Series: ML110 Gen10 Solution (2.5 inch), ML350 Gen10 Base (2.5 inch), ML350 Gen10 High Performance (2.5 inch), ML350 Gen10 Performance (2.5 inch), ML350 Gen10 SMB (2.5 inch), ML350 Gen10 Solution (2.5 inch), ML350 Gen10 Special Server (2.5 inch), ML350 Gen10 Sub-Entry (2.5 inch)
HPE Synergy Series: 480 Gen10 Compute Module (2.5 inch)
Users who prefer faster transfer rates and improved system response would find SAS 12GBPS SSDs handy. These drives are suitable for use in enterprise servers and storage arrays. They can process large workloads that require high input/output and low latency. SAS 12GBPS SSDs are one of the most improved storage devices for server virtualization, high-end computing, and data analytics.
These drives support dual-port operation with features that improve reliability. These features include advanced error correction, high signal quality, data integrity technology, and several others. They use higher signal voltages with end-to-end integrity, offering better data speed than SATA drives, and supporting multiple data paths.
Ultra-Fast & Consistent Performance
As SSDs continue to expand in the memory market, the SAS solid-state drives seek to leverage the 12GBPs architecture to offer high-level performance. The design of these drives allows them to carry out several operations effectively. Server virtualization, tiering, high-performance computing, and data analytics have never been faster.
These drives have steady performance specs to allow them to carry out sequential activities. Users will find SAS SSDs with form factors within the range of 1.8" and 3.5", making them a compact option. The SAS 12GBPS comes with a multi-path connection which provides room for fail-over redundancy. With this, users can be sure that there will be no single point of failure.
Furthermore, they feature advanced SAS error-control that ensures high-level error correction and data protection. There is also an error-recovery technology combination that helps to protect user data and prevent data loss.
Built for Data-Intensive & Energy Saving Applications
The virtual storage systems and servers in today's world demand a high level of data use. Bulky data requirements are needed for hybrid cloud environments and database systems. SAS 12GBPS SSDs are built to handle these data-intensive operations. Users will find SAS SSDs that offer capacities up to 30.72TB.
There are other lesser and more affordable capacity offerings available today. These provide data centers, analysts, and computing enthusiasts with more data storage options. Users will not need to buy several drives, thereby saving costs and rack spaces.
Also, these SAS 12GBPS SSDs come in various endurance ratings, depending on the operations they are used for. They also have different settings, which range from ultra-low to high. The ultra-low-power mode, for instance, helps users to maximize energy-saving while offering improved performance.
Features of SAS 12GBPS
- Ultra-fast performance for demanding enterprise operations
- Endurance build to match a variety of workloads
- Reduce data access wait times when used for complex workloads
- Offer the highest level of reliability and scalability
- Safeguard data against undetectable power losses and unexpected data corruption
- First-in-class storage density
- Ensure data integrity with topnotch error detection and correction technology
- Ensure data constant data availability for crucial systems.
Best-Fit Applications
- High-level enterprise operations with data-intensive workloads
- External enterprise solutions for servers
- Hyperscale operations
- Cloud data centers for bulk storage
- Centralized surveillance systems
- Backup and restore enterprise virtual tape
- High-capacity RAID storage
