Description
2-Port Fio Adapter
A 2-Port FIO Adapter is a network interface card (NIC) that provides connectivity for two ports on a server. “FIO” stands for “Factory Installed Option,” which means that the adapter is pre-installed and configured by the manufacturer, reducing the time and effort required to set up the server.
The 2-Port FIO Adapter is designed to support high-speed networking, with data transfer rates of up to 10 gigabits per second (10 Gbps). It typically uses a standard interface such as Ethernet, and can be connected to a variety of network switches, routers, and other devices.
The adapter is designed to provide reliable and high-performance network connectivity for servers, which is essential for many business applications. With two ports, the adapter can be used to provide redundancy and failover capabilities, ensuring that network traffic can be re-routed in the event of a hardware or network failure.
The FIO Adapter is designed to be easy to install and configure, and can be managed using a variety of software tools, including operating system utilities and vendor-specific management software.
Network Topology
Network topology refers to the physical or logical layout of a computer network, including the devices, connections, and protocols used to transmit data between these devices. The topology of a network can have a significant impact on its performance, scalability, and reliability.
There are several types of network topologies, including:
- Bus topology: In this topology, all devices are connected to a single central cable, called the bus. Data is transmitted in both directions along the bus, and each device listens for its own address before receiving data.
- Star topology: In this topology, all devices are connected to a central hub or switch, which acts as a central point for data transmission. Data is transmitted between devices through the hub or switch.
- Ring topology: In this topology, all devices are connected in a circular chain, with each device connected to the next in a ring. Data is transmitted in a single direction around the ring, and each device receives and retransmits the data until it reaches its destination.
- Mesh topology: In this topology, all devices are connected to each other in a complex network of interconnections. Data can take multiple paths through the network, providing redundancy and fault tolerance.
The network topology used will depend on the specific needs and requirements of the network, such as the number of devices, the distance between them, and the types of data being transmitted. The 700739-001 HPE Flexfabric 10GB 2-Port 534flb Fio Adapter can be used in various network topologies and is capable of transmitting data at high speeds with low latency.
Installation Procedures and Compatibility
Installation procedures and compatibility refer to the steps and requirements for installing the 700739-001 HPE Flexfabric 10GB 2-Port 534flb Fio Adapter in an HPE server or system, and ensuring that the adapter is compatible with the server or system.
To install the adapter, you will need to follow the instructions provided in the installation guide or user manual. These typically involve opening the server, locating the PCIe slot where the adapter will be installed, and firmly inserting the adapter into the slot. Once the adapter is installed, you will need to connect the appropriate cables to the adapter and to the network infrastructure.
In terms of compatibility, the 700739-001 adapter is designed to work with specific HPE servers and systems that have a compatible PCIe slot and meet the minimum hardware and software requirements. Before purchasing and installing the adapter, you should ensure that your server or system is on the list of compatible devices, and that it meets the necessary requirements in terms of power, memory, and operating system support.
It’s also important to note that the 700739-001 adapter may require specific firmware or driver updates in order to function properly with your server or system. You should consult the documentation or HPE support resources for the latest updates and recommendations
General Information
- Manufacturer: HPE
- Manufacturer Part Number: 700739-001
- Type: Networking
- Sub-Type: 2 Port
- Device Type : Network Adapter
- Form Factor : Plug-In Card
- Interface (Bus) Type : Pci Express 2.0 X8
- Pci Specification Revision : Pcie 2.0
- Ports : 10gb Ethernet X 2
- Connectivity Technology : Wired
- Data Link Protocol : 10 Gigabit Lan
- Data Transfer Rate : 10 GBPS
- Features : Tcp/Ip Offloading, Quality Of Service (Qos), Jumbo Frames Support, Pxe Support, Single Root I/O Virtualization (Sr-Iov), Tagged Vlan, Tcp Offload Engine (Toe)
- Compliant Standards : IEEE 802.3, IEEE 802.1q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (Lacp), IEEE 802.3ae, IEEE 802.3p, IEEE 802.1ab (Lldp), IEEE 802.3ap, IEEE 802.1qau





