The Cisco WS-X4019 Catalyst 4006 Backplane Channel Switching Module is an essential component within the Cisco Catalyst 4006 series switch. It plays a crucial role in enabling high-performance networking capabilities within large-scale enterprise environments. In this comprehensive guide, we delve into the functionalities, features, and significance of the Cisco WS-X4019 module.Understanding the Catalyst 4006 Switch Series
Before delving into the specifics of the WS-X4019 module, it's essential to grasp the foundational context of the Cisco Catalyst 4006 switch series. The Catalyst 4006 switch serves as a pivotal networking device designed to facilitate efficient communication and data transfer within complex network infrastructures.Key Features of the Cisco WS-X4019 Module
The Cisco WS-X4019 module is equipped with a range of features and functionalities that contribute to its effectiveness within enterprise networking environments:
- Backplane Channel Switching: The WS-X4019 module employs backplane channel switching technology to enable high-speed data transmission between network modules and line cards within the Catalyst 4006 switch.
- Compatibility: The module is designed to seamlessly integrate with other components of the Catalyst 4006 series switch, ensuring compatibility and interoperability across the network infrastructure.
- Scalability: With support for multiple line cards and network modules, the WS-X4019 module offers scalability, allowing enterprises to expand their network capabilities to accommodate growing business requirements.
- Redundancy: To enhance network reliability and minimize downtime, the WS-X4019 module features built-in redundancy mechanisms, ensuring seamless failover and uninterrupted operation in the event of hardware failures or system errors.
- High Performance: Leveraging advanced switching technologies, the Cisco WS-X4019 module delivers exceptional performance, enabling efficient data transfer and low-latency communication across the network.
The Cisco WS-X4019 Catalyst 4006 Backplane Channel Switching Module is ideally suited for a variety of deployment scenarios and use cases within enterprise networking environments:
- Data Center Networking: In data center environments where high-speed data transfer and low-latency communication are critical, the WS-X4019 module serves as a backbone component, facilitating efficient data exchange between servers, storage devices, and network infrastructure.
- Campus Networks: Within large-scale campus networks spanning multiple buildings or locations, the WS-X4019 module enables seamless connectivity and high-performance networking, supporting the diverse needs of academic institutions, corporate campuses, and government organizations.
- Service Provider Networks: Service providers leverage the Cisco WS-X4019 module to deliver reliable and high-speed connectivity services to their customers, supporting a wide range of applications and services, including internet access, voice communication, and multimedia streaming.
- High-Volume Transactions: In industries such as finance, e-commerce, and telecommunications, where high-volume transactions and real-time data processing are commonplace, the WS-X4019 module ensures optimal network performance and reliability, enabling businesses to meet their operational requirements.
The Cisco WS-X4019 Catalyst 4006 Backplane Channel Switching Module offers numerous benefits to enterprises seeking to optimize their network infrastructure:
- Enhanced Performance: By leveraging advanced switching technologies, the WS-X4019 module delivers high-performance networking capabilities, enabling enterprises to meet the demands of bandwidth-intensive applications and services.
- Improved Scalability: With support for multiple line cards and network modules, the WS-X4019 module provides enterprises with the flexibility to scale their network infrastructure according to evolving business requirements, ensuring seamless expansion and growth.
- Increased Reliability: The WS-X4019 module incorporates redundant components and failover mechanisms, enhancing network reliability and minimizing the risk of service disruptions or downtime.
- Simplified Management: With comprehensive management and monitoring capabilities, the WS-X4019 module enables administrators to efficiently configure, troubleshoot, and optimize network performance, streamlining day-to-day operations and enhancing overall efficiency.
The WS-X4019 Cisco Switching Accelerator Module is designed to provide advanced routing and switching capabilities to the Cisco Catalyst 4000 series switches. The following features contribute to its advanced routing and switching capabilities:
- High-Performance Switching Engine: The module uses a high-performance switch fabric to process packets, providing low latency and high throughput.
- Advanced Routing Protocols: The module supports advanced routing protocols, such as OSPF and BGP, for dynamic routing and the efficient exchange of routing information between routers.
- Link Aggregation: The module supports link aggregation protocols, such as LACP, to bundle multiple physical links into a single logical link, increasing bandwidth and improving network resiliency.
- Quality of Service (QoS): The module supports advanced QoS features, such as traffic shaping and prioritization, to ensure that critical network traffic receives the necessary resources.
- Virtual LAN (VLAN) Support: The module supports the use of VLANs to segment the network into multiple virtual networks, improving network security and reducing network congestion.
- Virtual Router Redundancy Protocol (VRRP): The module supports VRRP to provide redundancy and high availability for virtual routers.
The WS-X4019 provides advanced routing and switching capabilities for enterprise networks, delivering reliable and high-performance network services. The exact implementation of routing and switching protocols may depend on the specific software version and configuration, and it is recommended to consult the Cisco documentation for more information.
Easy Deployment and Management
The WS-X4019 Cisco Switching Accelerator Module is a hardware component designed to improve network performance by accelerating the switching process. Here are the steps for easy deployment and management of this module:
- Physical Installation: The module must be installed in an appropriate slot on a Cisco switch. Connect the module to the network and power it on.
- Configuration: The module must be configured using the Cisco IOS Command Line Interface (CLI) or a web-based interface. This includes setting up the appropriate ports, VLANs, and other network parameters.
- Monitoring: The module can be monitored using built-in tools such as Simple Network Management Protocol (SNMP) or syslog to ensure that it is functioning properly.
- Management: Software tools such as Cisco Works Resource Manager Essentials can be used to manage and maintain the module, including tasks such as updating firmware and managing configuration files.
Reliability and Security
The WS-X4019 Cisco Switching Accelerator Module is designed to provide reliable and secure network services for enterprise networks. The following features contribute to its reliability and security:
- Redundancy: The module supports various redundancy and failover mechanisms, such as redundancy power supplies and redundant supervisors, to ensure high network availability.
- Access Control Lists (ACLs): The module supports the use of ACLs to restrict access to specific network resources based on user-defined criteria, such as IP address, port number, and protocol type.
- Authentication: The module supports various authentication protocols, such as RADIUS and TACACS+, to verify the identity of network users before allowing access to network resources.
- Encryption: The module supports encryption technologies, such as IPsec, to secure network traffic and protect against eavesdropping.
- Firewall: The module can be used in conjunction with a firewall to provide an additional layer of security and protection against unauthorized access and malicious attacks.
- Virtual Private Network (VPN): The module supports VPN technologies, such as PPTP and L2TP, to provide secure remote access to the network.
- Manufacturer: Cisco
- Part Number or SKU# WS-X4019
- Product Type: Switching Module
- Product Name: Catalyst 4006 Backplane Switching Module
- Form Factor: Plug-in Module
- Designed For: Cisco Catalyst 4006
- Compatible Slots: 1 x Expansion Slot
- Construction: Original
- Software Included: Drivers & Utilities
- Device Type: Load Balancer
- Additional Information: This is a spare product intended for use with the following devices:
- Cisco Catalyst 4503 Switch
- Cisco Catalyst 4506 Switch
In general, the Cisco WS-X4019 Catalyst 4006 Backplane Channel Switching Module serves as a cornerstone of high-performance networking within enterprise environments. With its advanced features, scalability, and reliability, the WS-X4019 module empowers organizations to build robust and resilient network infrastructures capable of supporting their evolving business needs. By understanding the functionalities and benefits of the Cisco WS-X4019 module, enterprises can harness its power to drive innovation, improve operational efficiency, and achieve their strategic objectives in an increasingly interconnected world.
About Refurbished Products
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.