Dell 7FXC3 480GB SATA 6GBPS Read-intensive Solid State Drive Refurbished

The 7FXC3 is a solid-state drive (SSD) manufactured by Dell. It is specifically designed to be used with the Dell BOSS (Boot Optimized Storage Solution) card and is targeted towards enterprise-class servers. The drive has a capacity of 480 gigabytes (GB) and uses a Serial Advanced Technology Attachment (SATA) interface with a speed of 6 gigabytes per second (GBPS). This drive is a read-intensive SSD, which means that it is designed to be used in applications where data is read frequently but written less frequently. In this article, we will discuss the features of the 7FXC3 in detail.

The Dell 7FXC3 SATA SSD provides a generous storage capacity of 480GB. While it may not be the largest storage solution available, it's perfectly suited for specific applications and use cases where performance and reliability are paramount.

The SATA interface delivers fast and reliable data transfer speeds of up to 6GBPS. It is a widely adopted interface known for its compatibility and ease of integration, making it suitable for various storage systems and applications.

The M.2 2280 form factor is a compact and standardized design that fits neatly into M.2 slots on compatible motherboards or BOSS cards. This small form factor ensures compatibility with space-constrained systems, offering flexibility in installation.

The Dell 7FXC3 SSD is equipped with enterprise-class 64-layer Triple Level Cell (TLC) 3D NAND flash technology. TLC NAND technology strikes a balance between performance and cost-efficiency, making it a suitable choice for read-intensive workloads.

The SATA interface's speed and reliability make it a dependable choice for connecting to various storage systems, ensuring stable and consistent data transfer.

The M.2 2280 form factor is space-efficient and ensures compatibility with a wide range of systems, offering flexibility in installation.

The use of enterprise-class 64-layer TLC 3D NAND technology provides a balance between performance and cost-effectiveness, making this SSD an ideal solution for read-intensive workloads.

The SSD's read-intensive design makes it well-suited for applications and tasks that involve frequent data retrieval, such as serving as a boot drive for servers, hosting operating systems, or storing read-heavy application data.

The M.2 2280 form factor's compact size is ideal for systems with limited physical space. It can be used in a variety of small form factor servers, ensuring storage solutions are not limited by spatial constraints.

Sequential read and write speeds are essential performance metrics for an SSD. The Dell 7FXC3 SATA SSD delivers sequential read speeds of up to 550 megabytes per second (MB/s) and sequential write speeds of up to 480 MB/s. These speeds are well-suited for tasks involving reading and writing large files, such as booting up servers and data transfer.

Random read-and-write performance is crucial for workloads that involve a mix of small and large data requests. The Dell 7FXC3 showcases robust random read Input/Output Operations Per Second (IOPS) of up to 79,000 and random write IOPS of up to 10,000. This level of random IOPS is important for applications like server booting and read-heavy data access.

The Dell 7FXC3 SATA SSD is designed for read-intensive workloads and provides an endurance rating of up to 175 terabytes written (TBW) over the drive's lifespan. This level of endurance ensures long-term performance and reliability in BOSS card configurations.

Low latency is essential for applications that require real-time data access, such as server booting and critical data retrieval. The Dell 7FXC3 SATA SSD's design and enterprise-class TLC 3D NAND technology contribute to minimal latency, making it suitable for latency-sensitive server applications.

Data security is a top priority for enterprises, and the Dell 7FXC3 SATA SSD includes features to protect your data and ensure its integrity.

Data encryption is a critical security feature, especially for organizations handling sensitive data. The Dell 7FXC3 supports hardware-based AES 256-bit encryption, ensuring that your data is safeguarded from unauthorized access and data breaches.

Power loss protection is essential for preventing data loss or corruption in the event of a sudden power outage or system crash. The Dell 7FXC3 includes power loss protection mechanisms that ensure data integrity and prevent potential data loss in unexpected situations.

Data integrity is crucial to ensure that your stored data remains uncorrupted. The Dell 7FXC3 features advanced error-correction technology, such as End-to-End Data Protection, to prevent data corruption and maintain data accuracy.

The Dell 7FXC3 SATA SSD includes features like wear leveling, which ensures that data is evenly distributed across the NAND flash memory, extending the drive's lifespan and enhancing overall reliability.

The Dell 7FXC3 SSD is designed with energy efficiency in mind. It consumes less power compared to traditional hard disk drives, contributing to lower operating costs and reduced environmental impact.

The SSD's solid-state design generates less heat compared to spinning hard drives. This not only helps improve overall system cooling but also contributes to the drive's longevity and reliability.

The 7FXC3 uses a SATA interface to connect to the server's motherboard. SATA is a popular interface used in modern computers for connecting storage devices like hard disk drives (HDDs) and solid-state drives (SSDs). It is a point-to-point interface, which means that each device is connected directly to the motherboard, rather than being daisy-chained like older interfaces like Parallel ATA (PATA).

The SATA interface used by the 7FXC3 has a speed of 6 gigabytes per second (GBPS), which is the maximum speed supported by the SATA III standard. This speed is much faster than the previous SATA II standard, which had a maximum speed of 3 GBPS. The faster speed of the SATA III interface allows for faster data transfer rates and shorter load times.

The 7FXC3 uses the M.2 form factor, which is a small form factor designed to be used in mobile devices and other small form factor systems. The M.2 form factor is also commonly used in servers as a way to save space and increase storage density. The 7FXC3 uses the M.2 2280 form factor, which means that it is 22 millimeters wide and 80 millimeters long.

The M.2 form factor is an improvement over older form factors like the 2.5-inch and 3.5-inch form factors because it is much smaller and lighter. This makes it ideal for use in small form factor systems where space is limited. The M.2 form factor also allows for higher storage densities, which means that more storage can be packed into a smaller space.

The 7FXC3 is designed to be used with the Dell BOSS card. The BOSS card is a bootable PCIe adapter that provides a flexible, cost-effective solution for system boot drives and other storage requirements. The BOSS card provides a small form-factor storage solution that is ideal for use in small form-factor servers.

The 7FXC3 is specifically designed to work with the BOSS card, which means that it has been optimized for this application. This optimization means that the drive will work more efficiently when used with the BOSS card, which can improve system performance.

The 7FXC3 uses Triple Level Cell (TLC) NAND flash memory, which is a type of non-volatile memory that is commonly used in SSDs. TLC NAND flash is an improvement over older types of NAND flash like Single Level Cell (SLC) and Multi-Level Cell (MLC) NAND because it allows for higher storage densities.

The main advantage of TLC NAND flash is that it can store three bits of data per cell, which means that it can store more data in the same amount of space compared to SLC or MLC NAND flash. The downside of TLC NAND flash is that it has a lower endurance compared to SLC or MLC NAND flash. This means that it can withstand fewer write cycles before it starts to degrade.

• Manufacturer: Dell
• Part Number or SKU# 7FXC3
• Product Type: Solid State Drive
• Interface: SATA 6GBPS

• Storage Capacity: 480GB
• Form Factor: 2.5 Inch
• Flash Memory Type: Triple Level Cell ( 64 Layer 3d Nand Tlc )
• Interface: Serial Ata ( Sata Iii / Sata3 )
• Technology: Solid State Drive ( SSD)

• Enclosure: Internal
• Transfer Rate: 6gb/s
• Reading Speed: 560mb/s
• Writing Speed: 490mb/s
• Size Form Factor: M.2 2280
• Connector Interface: B+m Key
• Hard Drive Series / Class: Enterprise Class

In summary, the Dell 7FXC3 480GB SATA M.2 SSD stands as a reliable and efficient storage solution for a range of enterprise applications, offering balanced storage capacity, dependable connectivity, and robust performance tailored for read-intensive workloads. With its compatibility with the Dell BOSS card and enterprise-class TLC 3D NAND technology, it serves as a valuable asset in ensuring efficient data handling and reliability in enterprise