Performance and Speed
As an AI language model, I don't have access to real-time information on specific products, but I can provide some general information about performance and speed for solid state drives (SSDs) and factors that can affect them.
SSDs are faster than traditional hard disk drives (HDDs) because they use flash memory to store data instead of spinning disks. The speed of an SSD can be influenced by various factors, such as the interface it uses (e.g. SATA, SAS, NVMe), the controller chip, the amount of cache memory, and the type of flash memory used (e.g. MLC, TLC, QLC).
The HPE 632502-B21 200GB Sas 6Gbps 2.5 inch Small Form Factor (SFF) Multi-Level Cell (MLC) Solid State Drive uses the SAS (Serial Attached SCSI) interface, which is a high-speed interface that provides faster data transfer rates than SATA. SAS drives are typically used in server and enterprise environments where high performance and reliability are important.
The specific performance and speed of an SSD can vary depending on the workload and usage scenario. For example, an SSD used in a server environment with heavy workloads may perform differently than an SSD used in a desktop PC for everyday tasks. Therefore, it's important to review the manufacturer's specifications and third-party reviews to determine the performance and speed of a particular SSD.
In general, MLC-based SSDs can provide faster read and write speeds than TLC (triple-level cell) or QLC (quad-level cell) SSDs, but they may also be more expensive. The performance of the HPE 632502-B21 200GB Sas 6Gbps 2.5 inch Small Form Factor (SFF) Multi-Level Cell (MLC) Solid State Drive may be influenced by its SAS interface, its MLC flash memory, and other factors such as the workload type and the controller chip used.
Endurance and Reliability
As an AI language model, I don't have access to real-time information on specific products, but I can provide some general information about endurance and reliability for solid state drives (SSDs) and factors that can affect them.
Endurance refers to the amount of data that an SSD can write over its lifetime, usually measured in terabytes written (TBW). Multi-level cell (MLC) SSDs generally have higher endurance than lower-cost triple-level cell (TLC) or quad-level cell (QLC) SSDs because MLC can store more bits per cell and is therefore more durable.
The endurance of an SSD can also be influenced by various factors, such as the amount of data written per day (DWPD), the temperature of the SSD, the workload type, and the write amplification factor (WAF). In general, a higher DWPD and lower WAF can reduce the wear on the SSD and increase its endurance.
Reliability refers to the likelihood of an SSD failing or encountering errors during operation. SSD reliability can be influenced by various factors, such as the quality of the controller chip, the amount of cache memory, and the type of flash memory used.
When it comes to specific models, it's important to review the manufacturer's specifications and third-party reviews to determine the endurance and reliability of a particular SSD. For the HPE 632502-B21 200GB Sas 6Gbps 2.5 inch Small Form Factor (SFF) Multi-Level Cell (MLC) Solid State Drive, it is best to consult with the manufacturer's website or user manuals to learn more about its endurance and reliability specifications.
Form Factor and Compatibility
The HPE 632502-B21 200GB Sas 6Gbps 2.5 inch Small Form Factor (SFF) Multi-Level Cell (MLC) Solid State Drive has a 2.5 inch form factor, which is a standard size for many SSDs and hard disk drives (HDDs) used in laptops and servers. The 2.5 inch form factor is smaller than the 3.5 inch form factor used for some desktop HDDs.
The HPE 632502-B21 SSD uses the SAS (Serial Attached SCSI) interface, which is a high-speed interface that provides faster data transfer rates than SATA. SAS drives are typically used in server and enterprise environments where high performance and reliability are important.
Compatibility of the HPE 632502-B21 SSD may vary depending on the device or server it is being installed in. It is important to check the compatibility of the SSD with the device or server before purchasing it. The manufacturer's specifications and third-party reviews can provide information on the compatibility of the SSD with different devices and servers.
Additionally, it is important to ensure that the device or server has the necessary connectors and mounting options to support the 2.5 inch form factor and SAS interface of the SSD. Some devices or servers may require an adapter or bracket to install the SSD properly.
- Manufacturer: HPE
- Part Number or SKU# 632633-001
- Type: Solid State Drive
- Storage Capacity: 200 GB
- Host Interface: Not Applicable
- Drive Interface: SAS 6GBPS
- Form Factor: Internal
- Compatible Drive Bay Width: 2.5
Dimension & Weight
- Height: 5 Inch
- Width: 7 Inch
- Depth: 9 Inch
- Weight (approximate): 1.10 Lb
- Bladesystem Proliant Server Blades
- Hp Proliant Bl460c G7 Server Series
- Hp Proliant Bl465c G7 Server Series
- Hp Proliant Bl620c G7 Server Series
- Hp Proliant Bl680c G7 Server Series
- Hp Proliant Bl685c G7 Server Series
- Blade System Storage Blades : Hp D2200sb Storage Blade
- Disk Enclosures : Hp D2000 Disk Enclosures
- Hp Proliant Dl Servers
- Hp Proliant Dl160 G6 Server Series
- Hp Proliant Dl165 G7 Server Series
- Hp Proliant Dl180 G6 Server Series
- Hp Proliant Dl320 G6 Server Series
- Hp Proliant Dl360 G7 Server Series
- Hp Proliant Dl370 G6 Server Series
- Hp Proliant Dl380 G7 Server Series
- Hp Proliant Dl385 G7 Server Series
- Hp Proliant Dl580 G7 Server Series
- Hp Proliant Dl585 G7 Server Series
- Hp Proliant Ml Servers
- Hp Proliant Ml350 G6 Server Series
- Hp Proliant Ml370 G6 Server Series
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model's matching features with your current system.
About Refurbished Products
With the SAS 6Gbps SSD, you can use the same slots as with a hard disk drive that had the SAS interface. Check through our product offering for SAS SSDs in the 3Gbps, 6Gbps, and 12Gbps bandwidth options as well as either the 2.5-inch or the 3.5-inch form factors.
The SAS 6Gbps SSD is chiefly used for enterprise server applications. They are also suited for storage arrays that have application workloads that require high input/output (I/O), low latency, and high availability. If your business is based upon data analytics, online transaction processing, server virtualization, and high-performance computing, the SAS 6Gbps SSD is an excellent choice.
Notable features of the SAS 6Gbps SSD based on the serial attachment SCSI standard include:
- Performance: The data transfer speeds/rates in and out of storage will readily exceed 6Gbps (600MB/s throughput) and support full-duplex transmissions and advanced command queuing. This makes SAS 6Gbps SSD ideal for servers and workstations that require high data read/write speeds.
- Storage capacity: Even though the SAS technology is not big on storage capacity, there are still plenty of options to achieve collective storage capacity through a combination of both multiple SATA and SAS drives. We have the following capacities: 200GB, 300GB, 400GB, 480GB, 800GB, 920GB, 960GB, 1.6TB, 1.92TB, 2TB, 3.84TB, 4TB, and 7.68TB.
- Flexibility: The flexibility in using the SAS 6Gbps comes with backward compatibility with SCSI standards and physical and software compatibility on SATA drives.
- Scalability: The SAS 6Gbps offers a wide address range to support connections to external storage systems and other devices using long cables and small connectors.
- Reliability: It is highly possible to implement point-to-point connections, redundancy paths, and dual active port support with the SAS 6Gbps drives. The durability of the drives which is denoted as the meantime before failure (MTBF) is 1.2 to 1.6 million hours. The support of multiple data paths allows for greater availability and high-performance levels. In addition, the multiple data paths support data path redundancy.
- RAID technology: SAS technology makes use of SCSI technology, which incorporates a redundant array of independent disks (RAID) to prevent data loss. The RAID technology is critical for servers and workstations that process many transfers of temporary data. SAS technology employs multiple circuitry that allows data to be rerouted to a secondary circuit if the primary circuit fails.
The SAS 6Gbps will offer faster data transfer rates, easily achieving 600MB/s throughput. Compared to SATA SSDs, the SAS 6Gbps supports dual-port operation and plenty of built-in features that include RAID technology for data integrity, advanced error correction, and high signal quality on the cable with all work to improve reliability.
SAS 6GBps drives have a higher signal voltage that supports good overall end-to-end data integrity at double the speed of SATA drives. You will get high availability and better data path redundancy. This high-capacity SAS SSD is ideal for read-intensive workloads.
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.