693569-004 HPE 900GB 10K RPM SAS 6GBPS Enterprise Hot Plug Refurbished

The HPE 10K RPM SAS 6GBPS 900GB Enterprise Hot Plug SC Hard Disk Drive (693569-004) is designed with a range of features that make it well-suited for use in enterprise-level environments. Some of these features include:

• Hot-plug design: The hot-plug design allows for easy installation and replacement, which minimizes downtime in mission-critical environments.
• High-performance: With a 10,000 RPM spindle speed and a 6 Gbps data transfer rate, this hard drive delivers fast data access and high-speed data transfer.
• Large storage capacity: With 900GB of storage capacity, this hard drive can store large amounts of data, making it ideal for use in enterprise-level storage systems.
• Enhanced reliability: The hard drive is built to withstand the demands of enterprise-level environments, with features such as enhanced rotational vibration tolerance and advanced write caching to ensure high reliability and durability.
• Data protection: It includes advanced data protection features such as RAID and data encryption to ensure data is protected against failure, theft or unauthorized access
• Multi-drive firmware: The drive's firmware automatically optimizes the performance of the drive in multi-drive environments.
• SAS interface: SAS interface enables high-speed data transfer, and it also provides a higher level of reliability and data protection than SATA.

The HPE 10K RPM SAS 6GBPS 900GB Enterprise Hot Plug SC Hard Disk Drive (693569-004) features a SAS (Serial Attached SCSI) interface. SAS is a high-speed data transfer technology that is commonly used in enterprise-level servers and storage systems.

SAS uses a serial communication protocol, which allows for faster data transfer rates and increased reliability compared to parallel SCSI. The HPE drive has a 6 Gbps data transfer rate, which allows for faster data access and high-speed data transfer.

SAS also supports multiple initiators and multiple targets, which allows multiple devices to access the same hard drive at the same time. This allows for improved performance in multi-drive environments, such as blade servers and storage systems.

SAS also supports expanders which allows for the connection of multiple hard drives to a single SAS controller, increasing the capacity and scalability of the storage system.

SAS also provides a higher level of data protection and reliability than SATA, the other popular interface. This is because SAS has the capability to detect and correct errors in data storage, it also supports advanced features such as RAID and data encryption which help protect the data stored on the drive.

It is important to note that SAS drives are typically more expensive than SATA drives and also need a SAS controller which can add to the cost of the system. However, the improved performance and data protection features of SAS drives make them well suited for use in enterprise-level environments.

Reliability is a key feature of the HPE 10K RPM SAS 6GBPS 900GB Enterprise Hot Plug SC Hard Disk Drive (693569-004) which is designed to ensure the integrity of data stored on the drive and minimize downtime in mission-critical environments. Some of the features that contribute to its reliability include:

• Enhanced rotational vibration tolerance: This feature allows the drive to perform reliably in multi-drive environments, such as blade servers and storage systems, where high levels of vibration can occur.
• Advanced write caching: This feature improves the performance and reliability of the drive by reducing the number of write operations, which can cause wear and tear on the drive.
• Error Correction Code (ECC): ECC is a method of detecting and correcting errors in data storage. This feature ensures the integrity of data stored on the drive, preventing errors that can cause data loss or corruption.
• Error recovery control: This feature enables the drive to recover from errors, such as read and write errors, and to continue operating normally, avoiding drive failures.
• Durable components: The hard drive is built with high-quality components that have been tested to withstand the demands of enterprise-level environments.
• Firmware optimized for enterprise: The drive's firmware is specifically optimized for use in enterprise-level environments, ensuring high performance and reliability over time.
• Data protection features: The drive includes advanced data protection features such as RAID and data encryption to ensure data is protected against failure, theft or unauthorized access.
• Compatibility with HPE servers and storage systems: The drive is designed and tested for compatibility with a range of HPE server and storage systems, ensuring seamless integration and reliable performance.

These reliability features help to minimize the risk of data loss or corruption and ensure that the drive continues to perform reliably over time, making it suitable for use in mission-critical environments.

Part Number : 693569-004

Type : Hard Drive (HDD)

Sub-Type : 900GB 10K RPM SAS 6GBPS

Manufacturer : Hewlett Packard Enterprise

Brand Name : HPE

Capacity : 900 GB

Form Factor : 2.5 SFF

Interface : SAS 6GB/S

Data Transfer Rate : 600 MBPS

Spindle Speed : 10000 RPM

Dimensions (wxdxh) : 3.1 In X 4.7 In X 0.6 In

Weight : 25.57 Oz

Bundled With : HPE Smartdrive Carrier

Proliant Bl420c Gen8, Bl460c Gen8, Bl465c Gen8, Bl660c Gen8, Bl660c Gen9, Dl160 Gen8, Dl180 Gen9, Dl20 Gen9, Dl320e Gen8, Dl360 Gen9, Dl360e Gen8, Dl360p Gen8, Dl380 Gen9, Dl380e Gen8, Dl380p Gen8, Dl385p Gen8, Dl560 Gen8, Dl560 Gen9, Dl580 Gen9, Microserver Gen8, Ml110 Gen9, Ml110e Gen8, Ml30 Gen9, Ml310e Gen8, Ml350 Gen9, Ml350e Gen8, Ml350p Gen8, Sl210t Gen8, Sl230s Gen8, Sl250s Gen8, Sl270s Gen8, Sl4540 Gen8, Ws460c Gen8, Ws460c Gen9, Xl170r Gen9, Xl190r Gen9, Xl220a Gen8, Xl230a Gen9, Xl250a Gen9

Device Type : Hard Drive - Hot-swap

Capacity : 900 GB

Form Factor : 2.5 SFF

Interface : SAS 6GB/S

Bytes Per Sector : 512

Width : 3 In

Depth : 4.7 In

Height : 0.6 In

Weight : 25.57 Oz

Drive Transfer Rate : 600 MBPS (external)

Seek Time : 3.8 MS (average) / 7.4 MS (max)

Track-to-track Seek Time : 0.21 MS

Spindle Speed : 10000 RPM

Interfaces : 1 X SAS 6 GB/S

Compatible Bays : 2.5 SFF

Min Operating Temperature : 50 °F

Max Operating Temperature : 95 °F