861756-X21 HPE 4TB SAS 12GBPS 7.2K RPM LFF DS Hard Drive Bulk

The HPE 4TB SAS Hard Drive is compatible with a variety of systems and servers that support SAS (Serial Attached SCSI) interfaces. These include HPE ProLiant servers, HPE Synergy, HPE Apollo systems, HPE BladeSystems, and other SAS-enabled systems.

The HPE 4TB SAS Hard Drive is designed to be used in both internal and external storage environments, and it can be used as a primary storage drive, a secondary storage drive, or as a backup drive. It is also compatible with both Windows and Linux operating systems.

Additionally, it can be used in a wide range of applications such as data centers, cloud storage, virtualization, and data analytics. It is also suitable for use in enterprise-level environments, such as large organizations and data centers that require high-performance and high-capacity storage solutions.

It is important to note that it is always recommended to check the compatibility of the hard drive with the specific system or server that it will be used in, to ensure proper functioning and to avoid any potential issues.

The HPE 4TB SAS Hard Drive is designed to deliver high performance and reliability for demanding data center environments. It features a 12Gbps SAS interface, which provides faster data transfer speeds compared to older SAS and SATA hard drives. Additionally, the hard drive has a 7.2K RPM rotation speed, allowing for quick access to stored data.

The hard drive is also built with advanced technology, such as advanced format and self-encryption, which helps to improve the overall performance and reliability of the drive. This technology also allows for increased data density and improved error correction capabilities, which reduces the risk of data loss or corruption.

In terms of reliability, the HPE 4TB SAS Hard Drive is designed to handle heavy workloads and 24x7 operations. It features a high MTBF (mean time between failures) rating, which means that it is less likely to fail compared to other hard drives. Additionally, the hard drive is built with robust and durable components, which helps to ensure that it can withstand the rigors of a data center environment.

Upgrading your storage with the HPE 4TB SAS Hard Drive is a straightforward process. Here are the steps you will need to follow:

• Identify the system or server that you want to upgrade. Make sure it is compatible with the HPE 4TB SAS Hard Drive by checking the technical specifications.
• Turn off the system or server and unplug it from the power source.
• Open the case of the system or server. This will typically involve removing screws or sliding off a cover.
• Locate the hard drive bay or tray and remove any existing hard drives. You may need to use a screwdriver or release lever to do this.
• Carefully insert the HPE 4TB SAS Hard Drive into the bay or tray. Make sure it is properly seated and secure it in place with any screws or locking mechanisms.
• Close the case of the system or server and plug it back in to the power source.
• Turn on the system or server and boot it up. You may need to go into the BIOS or system settings to recognize the new hard drive.
• Once the system or server recognizes the new hard drive, you can initialize and format it. You can then use it for storage or as part of a RAID configuration.

Please note that this is a general guide and the steps may vary depending on the specific system or server you are using. It's recommended to check the specific instructions for your system or server before proceeding.

General Information

• Manufacturer : HPE
• MPN : 861756-X21
• Spare Part Number: 862141-001
• Model Number: MB4000JVYZC
• Model Number: MB004000JWFVD
• Model Number: MB004000JWFVK
• Assembly Number: 846521-001
• Assembly Number: 872288-001
• Assembly Number: 872290-001
• HPE GPN: 861759-008
• Type : Internal Hard Disk Drive (HDD)
• SSD Type : SAS-12GBPS
• SKU : 861756-X21

Technical Information

• Capacity: 4 TB
• Form Factor: 3.5 inch LFF
• Interface: SAS 12 GBPS
• Bytes per Sector: 512
• Drive Technology (Fill): Air
• Plug Type: Hot Plug
• Format Type: 512e
• Carrier Type: Smart Carrier (SC)
• Workload Type: Enterprise
• Features: Advanced Format 512e, Digitally Signed Firmware
• Bundled with: HPE Smart Carrier

Performance

• Drive Transfer Rate: 12 GB/Sec (External)
• Average Latency: 4.16 ms
• Internal Data Rate: 226 MBPS
• Spindle Speed: 7200 RPM

Expansion & Connectivity

• Compatible Bay: 3.5inch LFF
• Interfaces: 1 x SAS 12 GB/S

Power Consumption

• Idle Time: 5.73 Watt
• Random Read: 9.59 Watt

Environmental Parameters

• Max Operating Temperature: 95 °F
• Min Operating Temperature: 50 °F

Dimension and Weight

• Width : 4 Inch
• Depth : 5.8 Inch
• Height : 1 Inch
• Weight : 1.52 Lbs

Compatibility

• HPE ProLiant DL Series: DL160 Gen9 (3.5 inch), DL160 Gen9 Base (3.5 inch), DL160 Gen9 Entry (3.5 inch), DL160 Gen9 Performance (3.5 inch), DL20 Gen9 (3.5 inch), DL20 Gen9 Base (3.5 inch), DL20 Gen9 Entry (3.5 inch), DL20 Gen9 Performance (3.5 inch), DL20 Gen9 Special Server (3.5 inch), DL360 Gen10 (3.5 inch), DL360 Gen10 Base (3.5 inch), DL360 Gen10 Entry (3.5 inch), DL360 Gen10 High Performance (3.5 inch), DL360 Gen10 Low (3.5 inch), DL360 Gen10 Performance (3.5 inch), DL360 Gen10 SMB (3.5 inch), DL360 Gen10 Solution (3.5 inch), DL360 Gen9 (3.5 inch), DL360 Gen9 Base (3.5 inch), DL360 Gen9 CMS (3.5 inch), DL360 Gen9 Entry (3.5 inch), DL360 Gen9 Performance (3.5 inch), DL360 Gen9 Special Server (3.5 inch), DL380 Gen10 (3.5 inch), DL380 Gen10 Base (3.5 inch), DL380 Gen10 Entry (3.5 inch), DL380 Gen10 Entry SMB (3.5 inch), DL380 Gen10 for Cohesity DataPlatform (3.5 inch), DL380 Gen10 High Performance (3.5 inch), DL380 Gen10 Performance (3.5 inch), DL380 Gen10 SMB (3.5 inch), DL380 Gen10 Solution (3.5 inch), DL380 Gen9 (3.5 inch), DL380 Gen9 Base (3.5 inch), DL380 Gen9 Entry (3.5 inch), DL380 Gen9 High Performance (3.5 inch), DL380 Gen9 Performance (3.5 inch), DL380 Gen9 Special (3.5 inch), DL388 Gen9 (3.5 inch), DL388 Gen9 Base (3.5 inch), DL580 Gen9 (3.5 inch), DL580 Gen9 Base (3.5 inch), DL580 Gen9 Database (3.5 inch), DL580 Gen9 High Performance (3.5 inch), DL580 Gen9 SAP HANA Scale-out Base Configuration (3.5 inch), DL580 Gen9 SAP HANA Scale-up Base Configuration (3.5 inch)
• HPE ProLiant ML Series: ML110 Gen9 (3.5 inch), ML110 Gen9 Base (3.5 inch), ML110 Gen9 Entry (3.5 inch)