868930-001 HPE 1.92TB SATA-6GBPS DS Read Intensive Hot-Swap Refurbished

The 868930-001 HPE 1.92TB SATA-6GBPS DS Read Intensive Hot-Swap TLC M.2 SSD is a type of solid-state drive (SSD) that is designed for use in enterprise storage systems. It has a storage capacity of 1.92 terabytes and uses the SATA 6Gbps interface. The drive is optimized for read-intensive workloads and it's a hot-swap drive, meaning it can be replaced without shutting down the system, it also features TLC (Triple-level cell) technology, which is a type of NAND flash memory that stores three bits of data per cell.

There are several different types of SSDs available, including:

1. SLC (Single-level cell) SSDs: These SSDs store one bit of data per cell and are the most reliable and durable type of SSD, but also the most expensive.
2. MLC (Multi-level cell) SSDs: These SSDs store two bits of data per cell and are less expensive than SLC SSDs, but also less reliable and durable.
3. TLC (Triple-level cell) SSDs: These SSDs store three bits of data per cell and are the least expensive type of SSD, but also the least reliable and durable.
4. QLC (Quad-level cell) SSDs: These SSDs store four bits of data per cell and are the most affordable type of SSD, but also the least reliable and durable.
5. NVMe SSDs: These are SSDs that use the NVMe protocol, which is designed for high-speed data transfer and low latency. They are faster than SATA based SSDs, but also more expensive.
6. M.2 SSDs : These are small form factor SSDs that fits into a M.2 slot, they are faster than 2.5-inch SSDs and also consume less power.

The 868930-001 HPE 1.92TB SATA-6GBPS DS Read Intensive Hot-Swap TLC M.2 SSD is a high-performance solid-state drive (SSD) that offers several advantages over traditional hard disk drives (HDD).

• Faster read/write speeds: SSDs have significantly faster read/write speeds than HDDs, which means they can access and transfer data much faster. This makes them ideal for applications that require quick access to large amounts of data, such as data warehousing, video surveillance, and other data-intensive tasks.
• Increased durability: Because SSDs have no moving parts, they are less likely to fail due to mechanical issues. They are also less sensitive to physical shocks and vibrations, which makes them more durable than HDDs.
• Lower power consumption: SSDs consume less power than HDDs, which can help reduce energy costs and prolong the life of the drive.
• Smaller form factor: SSDs are available in a variety of form factors, including the M.2 form factor, which allows for smaller and more compact systems.
• Enhanced reliability: SSDs are designed to provide enhanced reliability and durability, which ensures that data stored on them can be accessed and used even in the event of a power failure, hardware failure, or other unexpected event.

The HPE 868930-001 is a 1.92TB solid-state drive (SSD) that uses the SATA 6Gbps interface and is designed for read-intensive workloads. This drive is a hot-swappable M.2 form factor and uses TLC (Triple-Level Cell) NAND flash memory to store data.

A solid-state drive (SSD) is a type of data storage technology that uses NAND flash memory to store data. Unlike traditional mechanical hard drives, SSDs do not have any moving parts, which allows for faster data access and improved performance. Some of the main benefits of SSDs include:

• Faster read and write speeds: SSDs can access data much faster than traditional hard drives.
• Improved durability: Since SSDs have no moving parts, they are less likely to be damaged by physical shocks or movement.
• Lower power consumption: SSDs use less power than traditional hard drives, which can help extend battery life on mobile devices or reduce power consumption in data centers.
• Increased capacity: SSDs are available in a wide range of capacities, and they continue to increase over time.
• Improved reliability: Since there are no moving parts in SSDs, the chances of mechanical failure are much lower, which leads to improved overall reliability.

• Manufacturer : HPE
• Model Number or SKU# 868930-001
• Device Type: Solid State Drive - Hot-Swap
• Capacity: 1.92 TB
• Form Factor: 2.5 inch SFF
• Interface: SATA 6Gbps
• NAND Flash Memory Type: Multi-level cell (MLC)
• Plug Type: Hot Pluggable
• Carrier Type: Smart Carrier (SC)
• Workload Type: Read Intensive
• Bundled with: HPE SmartDrive Carrier
• Features: Digitally Signed Firmware (DS)
• Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy

• Lifetime Writes: 2979
• Endurance DWPD (Drive Writes Per Day): 0.8
• Drive Transfer Rate: 600 MBps (external)
• MAX Seq. Reads Throughput (MiB/s): 530
• MAX Seq. Writes Throughput (MiB/s): 490
• Random Read Average Latency uSec (4KiB,Q1): 120
• Random Write Average Latency uSec (4KiB,Q1): 38
• Random Read IOPS (4KiB, Q=16): 61500
• Random Write IOPS (4KiB, Q=16): 26000
• MAX Random Read IOPS (4KiB): 73500@Q32
• MAX Random Write IOPS (4KiB): 26000@Q1
• 4KiB Random 70% Read / 30% Write, Queue 32 Performance (IOPS) VI-1: 56000
• 4KiB Random 50% Read / 50% Write, Queue 32 Performance (IOPS) VI-2: 44000

• Idle Time: 1.29 Watt
• Random Read: 2.87 Watt
• Random Write: 2.87 Watt
• Sequential Read: 3.10 Watt
• Sequential Write: 3.98 Watt
• Random Read/Write: 2.87 Watt

• Interfaces: 1 x SATA 6 Gb/s
• Compatible Bay: 2.5" SFF

• Compliant Standards: WEEE
• Environmental Parameters
• Min Operating Temperature: 32 °F
• Max Operating Temperature: 140 °F

• Height: 0.63 inch
• Width: 3.10 inch
• Depth: 5.45 inch
• Weight: 1.50 lbs

• HPE Apollo Series: 4200 Gen9 for Google (2.5 inch)
• HPE ProLiant BL Series: BL460c Gen10 (2.5 inch)
• HPE ProLiant DL Series: DL360 Gen10 (2.5 inch), DL360 Gen10 Base (2.5 inch), DL360 Gen10 Entry (2.5 inch), DL360 Gen10 High Performance (2.5 inch), DL360 Gen10 Low (2.5 inch), DL360 Gen10 Network Choice (2.5 inch), DL360 Gen10 Performance (2.5 inch), DL360 Gen10 SMB (2.5 inch), DL360 Gen10 SMB Network Choice (2.5 inch), DL360 Gen10 Solution (2.5 inch), DL380 Gen10 (2.5 inch), DL380 Gen10 All Flash Server for Datera (2.5 inch), DL380 Gen10 Base (2.5 inch), DL380 Gen10 Entry (2.5 inch), DL380 Gen10 Entry SMB (2.5 inch), DL380 Gen10 for Cohesity DataPlatform (2.5 inch), DL380 Gen10 High Performance (2.5 inch), DL380 Gen10 Hybrid Server for Datera (2.5 inch), DL380 Gen10 Network Choice (2.5 inch), DL380 Gen10 Network Choice for CTERA (2.5 inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (2.5 inch), DL380 Gen10 Performance (2.5 inch), DL380 Gen10 SMB (2.5 inch), DL380 Gen10 SMB Networking Choice (2.5 inch), DL380 Gen10 Solution (2.5 inch), DL388 Gen10 (2.5 inch), DL388 Gen9 (2.5 inch), DL388 Gen9 Base (2.5 inch), DL560 Gen10 (2.5 inch), DL560 Gen10 Base (2.5 inch), DL560 Gen10 Entry (2.5 inch), DL560 Gen10 Performance (2.5 inch), DL580 Gen10 (2.5 inch), DL580 Gen10 Base (2.5 inch), DL580 Gen10 Entry (2.5 inch), DL580 Gen10 Performance (2.5 inch)
• HPE ProLiant ML Series: ML350 Gen10 (2.5 inch), ML350 Gen10 Base (2.5 inch), ML350 Gen10 Entry (2.5 inch), ML350 Gen10 High Performance (2.5 inch), ML350 Gen10 Performance (2.5 inch), ML350 Gen10 SMB (2.5 inch), ML350 Gen10 Solution (2.5 inch), ML350 Gen10 Special Server (2.5 inch), ML350 Gen10 Sub-Entry (2.5 inch), XL190r Gen9 (2.5 inch)
• HPE Synergy Series: 480 Gen10 Base Compute Module (2.5 inch), 480 Gen10 Entry Compute Module (2.5 inch), 480 Gen10 Performance Compute Module (2.5 inch), 480 Gen10 Premium Backplane Compute Module (2.5 inch), 480 Gen10 Standard BackPlane Compute Module (2.5 inch), 480 Gen10 w/o Drives Compute Module (2.5 inch), 660 Gen10 Base Compute Module (2.5 inch), 660 Gen10 Compute Module (2.5 inch), 660 Gen10 Entry Compute Module (2.5 inch), 660 Gen10 Performance Compute Module (2.5 inch), 660 Gen10 Premium Compute Module (2.5 inch)

Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model's matching features with your current system.