P04474R-H21 HPE 480GB SATA-6GBPS 2.5inch DS SC Read New

The HPE P04474R-H21 480GB SATA-6GBPS 2.5inch DS SC Read Intensive solid state drive has been designed to consume less power compared to traditional hard disk drives. This results in lower energy bills and reduced environmental impact. The drive operates at 5 volts and has a maximum power consumption of 2.5 watts. This low power consumption makes it an ideal choice for use in data centers where power consumption is a significant concern.

The HPE P04474R-H21 SSD also features advanced heat management technology to ensure that the drive operates at optimal temperatures at all times. The SSD has been designed to dissipate heat more efficiently than traditional hard disk drives, which helps to prolong its lifespan and prevent data loss due to overheating.

The heat generated by the HPE P04474R-H21 SSD is primarily concentrated in the controller chip and NAND flash memory modules. The SSD uses a combination of thermal paste and thermal pads to transfer the heat away from these components to the aluminum housing, which acts as a heatsink. This design ensures that the SSD operates at a safe temperature even under heavy workloads.

In addition to the heat management features, the HPE P04474R-H21 SSD also supports power management features such as DevSleep and DIPM, which help to reduce power consumption when the drive is not in use. These features help to improve the overall efficiency of the SSD and reduce its carbon footprint.

Data security and encryption are important features of the HPE P04474R-H21 480GB SATA-6GBPS 2.5inch DS SC Read Intensive solid state drive. This means that the drive is designed to protect your data from unauthorized access, theft or loss.

The HPE P04474R-H21 SSD supports encryption using the AES 256-bit standard, which is one of the most secure and widely used encryption methods. This means that all data on the drive is encrypted using this method and can only be accessed by authorized users or devices with the correct encryption keys.

In addition to encryption, the HPE P04474R-H21 SSD also supports secure erase and sanitize options. Secure erase wipes all data on the drive, making it unrecoverable, while sanitize wipes all data and also performs additional operations to ensure that the drive is completely clean and ready for reuse.

The HPE P04474R-H21 SSD also supports self-encrypting drive (SED) technology, which allows the drive to automatically encrypt all data written to it and decrypt all data read from it. This makes it easy to use the drive in environments where data security is a high priority.

Endurance and reliability are critical factors to consider when evaluating the performance of an SSD, such as the HPE P04474R-H21. Endurance refers to the SSD's ability to withstand a certain number of write cycles before it starts to degrade in performance. In other words, endurance is a measure of how long an SSD will last under regular use.

The HPE P04474R-H21 480GB SATA-6GBPS 2.5inch DS SC Read Intensive solid-state drive is designed to deliver high levels of endurance and reliability, thanks to the use of advanced NAND flash memory technology. It has a total of 1.6 Petabytes Written (PBW) endurance rating, meaning that it can sustain 1.6 petabytes worth of writes during its lifetime. This level of endurance is ideal for read-intensive applications, where data is primarily read from the drive, rather than being written to it.

Reliability refers to the ability of the HPE P04474R-H21 SSD to maintain consistent performance over time. This is achieved through the use of advanced firmware and error-correcting codes that prevent data loss and maintain data integrity. The drive has a Mean Time Between Failures (MTBF) rating of 2 million hours, which indicates that it is highly reliable and can deliver consistent performance under a range of conditions.

• Manufacture: HPE
  
• MPN: P04474R-H21
• Type: Solid State Drive - Hot-Swap
• SSD Type: SATA 6GBPS
• SKU: P04474R-H21
• Spare Part Number: P05312-001
• Model Number: VK000480GWSXF
• Assembly Number: P03483-001

• Capacity: 480GB
  
• Form Factor: 2.5 inch SFF
• Interface: SATA 6Gbps
• NAND Flash Memory Type: Triple-level cell (TLC)
• Plug Type: Hot Pluggable
• Carrier Type: Smart Carrier (SC)
• Workload Type: Read Intensive
• Bundled with: HPE SmartDrive Carrier (SC)
• Features: Digitally Signed Firmware (DS)

Dimensions & Weight

• Height: 0.63 Inch
  
• Width: 3.10 Inch
• Depth: 5.45 Inch
• Weight: 1.50 Lbs

Environmental Parameters

• Min Operating Temperature: 32 °F
• Max Operating Temperature: 140 °F

• HPE ProLiant DL Series: DL20 Gen10 (2.5 inch), DL20 Gen10 Entry (2.5 inch), DL20 Gen10 Performance (2.5 inch), DL20 Gen10 solution (2.5 inch), DL325 Gen10 Base (2.5 inch), DL325 Gen10 Plus (2.5 inch), DL325 Gen10 Solution (2.5 inch), DL360 Gen10 Low (2.5 inch), DL360 Gen10 Network Choice (2.5 inch), DL360 Gen10 SMB (2.5 inch), DL360 Gen10 SMB Network Choice (2.5 inch), DL360 Gen10 Solution (2.5 inch), DL380 Gen10 All Flash Server for Datera (2.5 inch), DL380 Gen10 Entry SMB (2.5 inch), DL380 Gen10 for Cohesity DataPlatform (2.5 inch), DL380 Gen10 Hybrid Server for Datera (2.5 inch),
  
• DL380 Gen10 Network Choice (2.5 inch), DL380 Gen10 Network Choice for CTERA (2.5 inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (2.5 inch), DL380 Gen10 Server for CTERA (2.5 inch), DL380 Gen10 SMB (2.5 inch), DL380 Gen10 SMB Networking Choice (2.5 inch), DL380 Gen10 Solution (2.5 inch), DL385 Gen10 (2.5 inch), DL385 Gen10 Base (2.5 inch), DL385 Gen10 Entry (2.5 inch), DL385 Gen10 High-Performance (2.5 inch), DL385 Gen10 Performance (2.5 inch), DL385 Gen10 Plus (2.5 inch), DL385 Gen10 Plus Entry (2.5 inch), DL385 Gen10 SMB (2.5 inch), DL385 Gen10 Solution (2.5 inch), DL388 Gen10 (2.5 inch), DL580 Gen10 (2.5 inch), DL580 Gen10 Base (2.5 inch), DL580 Gen10 Entry (2.5 inch), DL580 Gen10 Performance (2.5 inch)
• HPE ProLiant ML Series: ML110 Gen10 (2.5 inch), ML110 Gen10 Entry (2.5 inch), ML110 Gen10 Performance (2.5 inch), ML110 Gen10 Solution (2.5 inch), ML30 Gen10 (2.5 inch), ML30 Gen10 Entry (2.5 inch), ML30 Gen10 Performance (2.5 inch), ML30 Gen10 Solution (2.5 inch), ML350 Gen10 (2.5 inch), ML350 Gen10 Base (2.5 inch), ML350 Gen10 Entry (2.5 inch), ML350 Gen10 High Performance (2.5 inch), ML350 Gen10 Performance (2.5 inch), ML350 Gen10 SMB (2.5 inch), ML350 Gen10 Solution (2.5 inch), ML350 Gen10 Special Server (2.5 inch), ML350 Gen10 Sub-Entry (2.5 inch)
• HPE Synergy Series: 480 Gen10 Compute Module (2.5 inch), 480 Gen10 Premium Backplane Compute Module (2.5 inch), 480 Gen10 Standard BackPlane Compute Module (2.5 inch), 480 Gen10 w/o Drives Compute Module (2.5 inch), 660 Gen10 Compute Module (2.5 inch), 660 Gen10 Premium Compute Module (2.5 inch), 680 Gen9 4S-EX Compute Module (2.5 inch)