P06194-X21 HPE 480GB 2.5Inch DS SATA 6GBPS SC Read Intensive Refurbished

The installation and configuration process for HPE P06194-X21 480GB 2.5Inch DS SATA 6GBPS SC Read Intensive Hot Plug solid state drive is straightforward and can be done in a few steps.

• Identify the server that the SSD will be installed in. Check the server specifications to ensure compatibility.
• Shut down the server and disconnect it from power. Locate the drive bay where the SSD will be installed.
• Remove the drive bay cover and insert the SSD into the bay. Make sure the connectors are aligned and secure the SSD in place.
• Reattach the drive bay cover and connect the server to power.
• Power on the server and enter the BIOS settings. Check that the SSD is detected and recognized by the system.
• If the SSD is not detected, enter the RAID controller configuration utility and initialize the drive. This will create a logical drive that the server can recognize.
• Once the drive is initialized, configure the server operating system to recognize the new storage device. This can be done through the disk management utility in Windows, or the fdisk command in Linux.
• Configure the SSD according to your desired settings. HPE provides a variety of tools for configuring and managing their SSDs, including the Smart Storage Administrator (SSA) and Smart Array Configuration Utility (SACU).
• Test the SSD performance to ensure that it is functioning as expected. You can use benchmarking tools like CrystalDiskMark or Iometer to measure read and write speeds.
• Finally, monitor the SSD health and performance over time to ensure that it continues to operate effectively. HPE provides monitoring tools like the Integrated Management Log (IML) and System Management Homepage (SMH) for this purpose.

Maintaining and troubleshooting the HPE P06194-X21 solid-state drive involves several steps that ensure optimum performance and longevity. Here are some tips for maintenance and troubleshooting:

• Keep the firmware updated: Firmware updates are essential to keep the drive functioning optimally. Check the HPE website for the latest firmware version and update the drive as required.
• Monitor the temperature: Solid-state drives can overheat, which affects their performance and lifespan. Use monitoring software to keep an eye on the drive's temperature and take steps to reduce it if it exceeds the recommended range.
• Keep the drive clean: Dust and debris can accumulate on the drive's connectors and cause issues. Use a soft brush or compressed air to clean the drive regularly.
• Check the cables and connectors: Loose or damaged cables and connectors can cause the drive to malfunction. Ensure that the cables are securely connected and inspect them for damage.
• Use diagnostic tools: HPE offers diagnostic tools that can help troubleshoot issues with the drive. Use these tools to identify and fix any problems with the drive.
• Backup data regularly: In case of a drive failure or corruption, having a backup of the data is essential. Backup the data regularly to ensure that no critical data is lost.
• Contact HPE support: If you encounter any issues that cannot be resolved using the above methods, contact HPE support for assistance. They can provide additional troubleshooting steps or replace the drive if required.

By following these maintenance and troubleshooting steps, you can ensure that your HPE P06194-X21 solid-state drive functions optimally and has a long lifespan.

HPE P06194-X21 480GB 2.5Inch DS SATA 6GBPS SC Read Intensive Hot Plug solid state drive comes with advanced data security and encryption features. Some of the key security features are:

• Self-Encrypting Drive (SED): This feature encrypts all the data on the drive in real-time, protecting it from unauthorized access. SED also provides a quick and secure way to erase data when the drive is retired or repurposed.
• AES 256-bit Encryption: HPE P06194-X21 uses AES 256-bit encryption, one of the strongest encryption algorithms available. This ensures that data is protected from theft or unauthorized access.
• Trusted Computing: HPE P06194-X21 comes with trusted computing capabilities that ensure that only trusted software can access the data on the drive. This helps prevent malware and other malicious software from accessing sensitive data.
• Secure Boot: HPE P06194-X21 also comes with secure boot capabilities that ensure that only trusted firmware and software can be loaded onto the drive. This helps prevent unauthorized access and ensures the integrity of the drive.
• Secure Erase: HPE P06194-X21 also comes with a secure erase feature that allows users to quickly and securely erase all data on the drive. This feature is useful when the drive is being retired or repurposed.

• Manufacturer: HPE
• MPN: P06194-X21
• Type: Solid State Drive
• SSD Type: SATA-6GBPS
• SKU: P06194-X21
• Spare Part Number: P06571-001, VK000480GWTHA, P04954-001

• Capacity: 480GB
  
• Form Factor: 2.5 Inch SFF
• Interface: SATA- 6GBPS
• NAND Flash Memory Type: Triple-level cell (TLC)
• Plug Type: Hot Pluggable
• Connectivity Type: Single
• Carrier Type: Smart Carrier (SC)
• Workload Type: Read Intensive
• Bundled with: HPE Smart Drive Carrier (SC)
• Features: Digitally Signed Firmware (DS)
• Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
• Height: 7.00 mm(0.30 inch)

• Lifetime Writes (TB): 430
  
• Endurance DWPD (Drive Writes Per Day): 0.50
• Drive Transfer Rate: 6 GBps (external)
• MAX Seq. Reads Throughput (MiB/s): 530
• MAX Seq. Writes Throughput (MiB/s): 300
• Random Read Average Latency uSec (4KiB,Q1): 120
• Random Write Average Latency uSec (4KiB,Q1): 65
• Random Read IOPS (4KiB, Q=16): 65000
• Random Write IOPS (4KiB, Q=16): 15000
• MAX Random Read IOPS (4KiB): 65500@Q32
• MAX Random Write IOPS (4KiB): 15400@Q1

• Idle Time: 0.78 Watt
  
• Random Read: 1.61 Watt
• Random Write: 1.61 Watt
• Sequential Read: 1.68 Watt
• Sequential Write: 1.90 Watt
• Random Read/Write: 1.61 Watt
• MAX: 2.00 Watt

• Min Operating Temperature: 32 °F
• Max Operating Temperature: 140 °F

• Designed for
  
• HPE Apollo Series: 4200 Gen9 For Google (2.5 Inch)
• HPE Proliant DL Series: DL20 Gen10 (2.5 Inch), DL20 Gen10 Entry (2.5 Inch), DL20 Gen10 Performance (2.5 Inch), DL20 Gen10 Solution (2.5 Inch), DL325 Gen10 (2.5 Inch), DL325 Gen10 Base (2.5 Inch), DL325 Gen10 Entry (2.5 Inch), DL325 Gen10 Performance (2.5 Inch), DL325 Gen10 Plus (2.5 Inch), DL325 Gen10 SMB Solution (2.5 Inch), DL325 Gen10 Solution (2.5 Inch), DL360 Gen10 Low (2.5 Inch), DL360 Gen10 Network Choice (2.5 Inch), DL360 Gen10 SMB (2.5 Inch), DL360 Gen10 SMB Network Choice (2.5 Inch), DL360 Gen10 Solution (2.5 Inch), DL380 Gen10 All Flash Server For Datera (2.5 Inch), DL380 Gen10 Entry SMB (2.5 Inch), DL380 Gen10 For Cohesity Dataplatform (2.5 Inch), DL380 Gen10 Hybrid Server For Datera (2.5 Inch), DL380 Gen10 Network Choice (2.5 Inch), DL380 Gen10 Network Choice For CTERA (2.5 Inch), DL380 Gen10 Network Choice For SAP HANA Compute Block (2.5 Inch), DL380 Gen10 Server For CTERA (2.5 Inch), DL380 Gen10 SMB (2.5 Inch), DL380 Gen10 SMB Networking Choice (2.5 Inch)
• HPE Proliant ML Series: ML30 Gen10 (2.5 Inch), ML30 Gen10 Entry (2.5 Inch), ML30 Gen10 Performance (2.5 Inch), ML30 Gen10 Solution (2.5 Inch), ML30 Gen9 Entry (2.5 Inch), ML30 Gen9 Solution (2.5 Inch), ML350 Gen10 (2.5 Inch), ML350 Gen10 Base (2.5 Inch), ML350 Gen10 Entry (2.5 Inch), ML350 Gen10 High Performance (2.5 Inch), ML350 Gen10 Performance (2.5 Inch)

• Height: 0.63 Inch
  
• Width: 3.10 Inch
• Depth: 5.45 Inch
• Weight: 1.50 Lbs