P10226-K21 HPE 6.4TB NVMe PCIE Read Intensive Smart Carrier New

The P10226-K21 HPE 6.4TB NVMe PCIE Read Intensive Smart Carrier (SFF) SSD is a NVMe (Non-Volatile Memory Express) SSD, which uses the PCIe (Peripheral Component Interconnect Express) interface for connectivity.

The NVMe interface is a high-speed, low-latency interface designed specifically for solid-state storage devices. It provides much faster performance than traditional SATA or SAS interfaces. The PCIe interface provides a high-bandwidth, low-latency connection between the SSD and the host system, allowing for maximum performance.

The P10226-K21 HPE 6.4TB NVMe PCIE Read Intensive Smart Carrier (SFF) SSD is designed for use in enterprise storage systems, and typically would be used in a server or storage array that supports NVMe and PCIe connectivity. The drive is designed to fit into a small form factor (SFF) hot-swappable carrier, making it easy to install and replace.

It's important to check the compatibility of the drive with your system before making a purchase to ensure that it will work properly and provide the desired performance.

The P10226-K21 HPE 6.4TB NVMe PCIE Read Intensive Smart Carrier (SFF) SSD can be managed and monitored using a variety of tools, depending on your specific needs and system setup. Some common tools for managing and monitoring NVMe SSDs include:

• HPE Smart Storage Administrator (HPE SSA): This is a browser-based tool that provides a centralized management interface for HPE ProLiant servers and storage systems. HPE SSA can be used to monitor the health and status of NVMe SSDs, as well as to update their firmware and configure various settings.
• HPE Systems Management Homepage: This is a web-based interface that provides a consolidated view of the health and status of HPE ProLiant servers and storage systems. It can be used to monitor the health and performance of NVMe SSDs, as well as to update their firmware.
• NVMe Management Interface: This is a set of management and monitoring commands built into the NVMe specification that can be used to monitor the performance and health of NVMe SSDs. NVMe management commands can be executed using the NVMe CLI, which is available for various operating systems.
• System Management Software: Depending on the specific server or storage system that you are using, there may be other system management tools available that provide NVMe SSD monitoring and management capabilities. For example, if you are using a HPE ProLiant server, you may be able to use the HPE iLO web interface to monitor the health and status of NVMe SSDs.

Wear-leveling and over-provisioning are two important techniques used in modern solid-state drives (SSDs) to ensure reliable performance and prolong the life of the drive.

Wear-Leveling: Wear-leveling is a technique that helps to distribute the write operations evenly across the entire flash memory in an SSD. This helps to avoid over-using a specific area of the drive, which can cause that area to wear out faster than the rest of the drive. By spreading the writes across the entire drive, wear-leveling helps to ensure that the drive has a long and reliable lifespan.

Over-Provisioning: Over-provisioning is a technique that reserves a portion of the total storage capacity of the SSD for use by the controller as "spare area." This spare area can be used to improve performance, as well as to help with wear-leveling and error correction. By having a larger pool of spare area available, the controller can more easily move data around to balance the wear on the drive and prevent performance degradation over time.

The P10226-K21 HPE 6.4TB NVMe PCIE Read Intensive Smart Carrier (SFF) SSD is designed to use both wear-leveling and over-provisioning to ensure reliable performance and long-term reliability. The specific implementation of these techniques will vary depending on the controller and firmware used in the drive, but they are both essential components of modern SSD technology.

• Manufacturer :HPE
• Model Number or SKU# P10226-K21
• Device Type: Solid State Drive - Hot-Swap
• Capacity: 6.4 TB
• Form Factor: 2.5 inch SFF
• Interface: PCI Express 3.0 x4 (NVMe)
• Plug Type: Hot Pluggable
• Carrier Type: Smart Carrier NVMe (SCN)
• Workload Type: Mixed Use
• NAND Flash Memory Type: Triple-Level Cell (TLC)
• Connectivity: Dual Port
• Bundled with: HPE Smart Carrier NVMe (SCN)
• Features: Digitally Signed Firmware (DS)
• Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
• Height: 15.00 mm (0.60 inch)

• Lifetime Writes: 58400
• Endurance DWPD (Drive Writes Per Day): 5
• MAX Seq Reads Throughput (MiB/s): 3400
• Max Seq Writes Throughput (MiB/s): 2800
• Random Read Avg. Latency uSec (4KiB,Q1): 100
• Random Write Avg. Latency uSec (4KiB,Q1): 25
• Random Read IOPS (4KiB, Q=16): 149000
• Random Write IOPS (4KiB, Q=16): 155000
• Max Random Read IOPS (4KiB): 780000@Q256
• Max Random Write IOPS (4KiB): 200000@Q32

• Interfaces: 1 x PCI Express 3.0 x4 (NVMe)
• Compatible Bay: 2.5" SFF

• HPE Nimble Storage dHCI Large Solution with HPE ProLiant DL380 Gen10 (2.5inch), Medium Solution with HPE ProLiant DL360 Gen10 (2.5inch), Small Solution with HPE ProLiant DL360 Gen10 (2.5inch)
• HPE ProLiant DL Series: DL325 Gen10 (2.5inch), DL325 Gen10 Base (2.5inch), DL325 Gen10 Entry (2.5inch), DL325 Gen10 Performance (2.5inch), DL325 Gen10 SMB Solution (2.5inch), DL325 Gen10 Solution (2.5inch), DL360 Gen10 All Flash Server for Datera (2.5inch), DL360 Gen10 All Flash Server for Weka (2.5inch), DL360 Gen10 Compute Server for Cohesity DataPlatform (2.5inch), DL360 Gen10 Low (2.5inch), DL360 Gen10 Network Choice (2.5inch), DL360 Gen10 Performance for Cohesity DataPlatform (2.5inch), DL360 Gen10 SMB (2.5inch), DL360 Gen10 SMB Network Choice (2.5inch), DL360 Gen10 Solution (2.5inch), DL360 Gen9 High Performance (2.5inch), DL380 Gen10 All Flash Server for Datera (2.5inch), DL380 Gen10 Entry SMB (2.5inch), DL380 Gen10 for Cohesity DataPlatform (2.5inch), DL380 Gen10 for SAP HANA Compute Block (2.5inch), DL380 Gen10 Hybrid Server for Datera (2.5inch), DL380 Gen10 Network Choice (2.5inch), DL380 Gen10 Network Choice for CTERA (2.5inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (2.5inch), DL380 Gen10 NVMe All Flash Server for Datera (2.5inch), DL380 Gen10 Server for CTERA (2.5inch), DL380 Gen10 SMB (2.5inch), DL380 Gen10 SMB Networking Choice (2.5inch), DL380 Gen10 Solution (2.5inch)
• HPE Synergy 480 Gen10 Compute Module (2.5inch), 480 Gen10 Premium Backplane Compute Module (2.5inch), 480 Gen10 w/o Drives Compute Module (2.5inch), 660 Gen10 Compute Module (2.5inch), 660 Gen10 Premium Compute Module (2.5inch), 680 Gen9 4S-EX Compute Module (2.5inch)

Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model's matching features with your current system.