Endurance Management and Extended Life
The HPE P40472-K21 3.84TB DS SAS-24GBPS Read Intensive Hot Swap SSD is designed for high-performance applications and provides a high level of endurance and reliability. The endurance of an SSD is determined by the amount of data that can be written to the drive over its lifetime, which is measured in terabytes written (TBW).
To extend the life of the HPE P40472-K21 SSD, it is important to understand its workload and usage pattern and to manage it accordingly. Some of the ways to extend the life of the drive include:
- Avoiding excessive writes: Excessive writes to the SSD can cause the drive to wear out faster. It is important to avoid writing large amounts of data to the drive frequently, especially if the data is not frequently accessed.
- Implementing power management: Proper power management helps to reduce the wear and tear on the drive. Power management features, such as putting the drive into a low-power state when not in use, can help to extend the life of the drive.
- Using data compression and deduplication: Data compression and deduplication can help to reduce the amount of data that is written to the drive, which in turn reduces the wear and tear on the drive.
- Using a storage tiering system: Storage tiering systems can help to distribute the data across multiple drives, reducing the wear and tear on any one drive. This can help to extend the life of the drive.
- Implementing error correction and data protection: Error correction and data protection can help to ensure that the data stored on the drive is protected against data loss or corruption, which can help to extend the life of the drive.
Operating System and Driver Support
The HPE P40472-K21 3.84TB DS SAS-24GBPS Read Intensive Hot Swap SSD is a high-performance solid-state drive (SSD) designed for use in server and storage environments. The operating system and driver support for this SSD would depend on the specific hardware platform it is being used with.
In general, HPE servers and storage systems support a wide range of operating systems including Windows, Linux, VMware, and other commonly used operating systems. Additionally, HPE provides device drivers and software support for their products, including the HPE P40472-K21 SSD.
For specific information on operating system and driver support for the HPE P40472-K21 SSD, you should consult the product documentation or contact HPE support. They will be able to provide you with the most up-to-date information on supported operating systems and drivers for your specific configuration.
Embedded and Edge Computing
The HPE P40472-K21 3.84TB DS SAS-24GBPS Read Intensive Hot Swap SSD is well-suited for use in embedded and edge computing environments due to its high performance, reliability, and durability.
Embedded systems are computing systems integrated into other devices or products, while edge computing refers to the practice of processing data at the edge of a network, near the source of the data, rather than sending the data to a central location for processing.
In these environments, the HPE P40472-K21 SSD can be used as a high-speed storage solution for data-intensive applications that require fast access to data, such as real-time data processing and analysis. The high read performance of the drive, along with its hot-swap capability, allows for quick and easy replacement in case of failure, minimizing downtime.
Additionally, the HPE P40472-K21 SSD has a high endurance rating, making it well-suited for use in environments where the drive may be subjected to high levels of write activity. This makes it a good choice for applications that require high write performance, such as logging and data collection.
General Information about this HPE P40472-H21
- Brand Name : HPE
- Part Number or SKU# P40472-K21
- Type: Solid State Drive - SSD
- SSD Type: SAS 24GBPS
Technical Information of HPE 3Terabyte Solid State Drive
- Device Type: Solid State Drive - Hot-Swap
- Capacity: 3.84 TB
- Interface: SAS 24GBPS
- NAND Flash Memory Type: Triple-level cell (TLC)
- Workload Type: Read Intensive
- Plug Type: Hot Pluggable
- Connectivity Type: Dual
- Carrier Type: Basic Carrier (BC)
- Form Factor: 2.5 inch SFF
- Bundled with: HPE Basic Carrier (BC)
- Platform Supported: HPE ProLiant Rack
- Features: Digitally Signed Firmware (DS)
Dimensions & Weight of this 24 GBPS SSD
- Height: 5.75 inch
- Width: 8.63 inch
- Depth: 9.00 inch
- Weight: 1.10 lbs
Compatibility Information
HPE ProLiant DL Series: DL20 Gen10 Plus (2.5inch), DL20 Gen10 Plus Base (2.5inch), DL20 Gen10 Plus Entry (2.5inch), DL20 Gen10 Plus High Performance (2.5inch), DL20 Gen10 Plus Performance (2.5inch), DL325 Gen10 Plus V2 (2.5inch), DL325 Gen10 Plus V2 Base (2.5inch), DL325 Gen10 Plus V2 for Weka Base Tracking (2.5inch), DL325 Gen10 Plus V2 Performance (2.5inch), DL345 Gen10 Plus (2.5inch), DL345 Gen10 Plus Base (2.5inch), DL345 Gen10 Plus Entry (2.5inch), DL360 Gen10 Plus (2.5inch), DL360 Gen10 Plus All-NVMe Server for Software Defined Storage (2.5inch), DL360 Gen10 Plus for Weka Base Tracking (2.5inch), DL360 Gen10 Plus Network Choice (2.5inch), DL365 Gen10 Plus (2.5inch), DL380 Gen10 Plus (2.5inch), DL380 Gen10 Plus Network Choice (2.5inch)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model's matching features with your current system.
When it comes to computing, priorities are placed on storage and performance. The hard drive is often viewed as a major storage device. However, there is alternative hardware that can do a perfect job. People now use Solid State Drives as the main storage device for a wide range of technological needs.
An SSD is a nonvolatile storage media that stores data on solid-state flash memory. It emulates the hard disk drive by enhancing servers' capabilities and performance, desktop computers, and other devices. Users view them as the best option for responsiveness, increased disk space, and better performance.
SSD VS HDD
Solid State Drives and hard disk drives are somewhat similar in their physical specification. However, they store data in different ways. HDD stores data magnetically via spinning disk platters. It has an actuator arm with transducers that read and write data on the platter.
On the other hand, an SSD stores data in integrated circuits. It has no moving parts and does not require users to wait for platter movement. They are much smaller and more flexible than hard disk drives - HDDs. Having no physical moving parts and using electrical circuits makes solid-state drives faster than their hard drive counterparts.
Their faster speed makes them more useful when carrying out storage-intensive tasks. Many SSDs also come with PCIe interfaces, which makes them faster than HDDs with SATA interfaces. Also, SSDs are generally more reliable than HDDs. This is because they have no moving parts, and vibration or friction does not affect them.
Data access with SSDs is faster, so they require less power. This results in longer battery life for servers and computers. HDDs, on the other hand, require more power because of their moving disk platters.
How to Do Solid State Drives Work?
Solid State Drives read and write data on interconnected flash memory chips. They come with floating gate transistors (FGRs) that help them hold electrical charges. With the FGRs, SSDs retain information even when power is turned off.
The NAND flash memory stores the data of the SSD. They make use of four NAND cell technologies – single, multi, triple, and Quad-level cells. Single-level cells (SLC) hold one bit of data at a time.
Multi-level cells (MLC) can hold two bits of data per cell. They have more storage space than SLC. Triple-level cells (TLC) hold three bits of data per cell, offering more capacity than the SLC and MLC. The Quad-level cells (QLC) store four bits of data, giving migrating electrons the most significant effect.
Types of SSDs
The types of solid-state drives depend on the way they are used. Some of these devices are installed within the system hardware, while others are connected externally through ports. The common interfaces for SSD connection are:
-
PCIe and NVMe
Users make use of PCI Express (PCIe) to connect graphics cards and related high-performance peripherals. It is an interface with low latency and high bandwidth. Therefore, it is ideal for very fast communication between the SSD and the server.
Nonvolatile Memory Express standard (NVMe) offers higher input-output per second. SSDs that use this connection type run at up to 4,000 MB/s.
-
SATA III and mSATA III
Serial Advanced Technology Attachment (SATA) is an older interface than the PCIe. Their signaling technology allows them to transfer data faster than traditional hard disk drives - HDDs. They have speeds of up to 600MB per second. SATA SSDs also offer the best compatibility and value than the HDD variants.
There are SSDs that are designed for business purposes. They can be external or internal, and they are convenient means of boosting PCs, desktop computers, gaming consoles, and servers.
-
SAS SSD
The Serial-Attached SCSI (SAS) version SSDs provide faster data transfer rates than the SATA SSDs. In general, a SAS SSD provides a dual-port connection and builds in features to improve reliability, high error correction, low data latency, end-to-end data integrity, high signal quality on the cable or backplane which is a NAND flash-based storage and fits in HDDs slot of enclosures. A SAS solid-state drive bandwidth speeds 3Gbps, 6Gbps, and 12Gbps, there are two form factors 2.5 inches and 3.5 inches.
There are SSDs that are designed for business purposes. They can be external or internal, and they are convenient means of boosting PCs, desktop computers, gaming consoles, and servers.
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
