P40506-X21 HPE 960GB SAS-12GBPS BC Read Intensive Value SSD New

The HPE 960GB SAS-12GBPS BC Read Intensive Value Solid State Drive (P40506-X21) is a high-performance storage device designed for use in enterprise-level servers and storage arrays. To ensure the proper functioning of the drive and to prevent data loss or corruption, it is important to monitor and troubleshoot any issues that may arise.

Monitoring:

• Health Status: This is the most important aspect of monitoring the drive. The health status indicates the overall condition of the drive and whether it is functioning normally or not.
• Performance Metrics: The performance of the drive can be monitored through various metrics such as read and write speed, input/output operations per second (IOPS), and latency. These metrics help to identify any performance issues and to determine whether the drive is operating within its specified limits.
• Error Logs: Error logs can be accessed through the operating system or through a management software. They provide information about any errors or failures that have occurred on the drive, including the type of error and the time it occurred.

Troubleshooting:

• Health Status: If the health status of the drive indicates that there is a problem, the first step is to isolate the issue. This can be done by checking the error logs or by using a diagnostic tool.
• Performance Metrics: If the performance of the drive is below the expected level, it may be due to a number of factors, including a busy system, insufficient resources, or a configuration issue. These issues can be resolved by optimizing the system settings, adding more resources, or changing the configuration of the drive.
• Error Logs: If there are errors recorded in the error logs, it is important to take action to resolve the issue. Depending on the type of error, this may involve replacing the drive, updating the firmware, or making changes to the system configuration.

In conclusion, monitoring and troubleshooting the HPE 960GB SAS-12GBPS BC Read Intensive Value Solid State Drive is essential to ensure its proper functioning and to prevent data loss or corruption. By regularly monitoring the health status, performance metrics, and error logs, and taking prompt action to resolve any issues that arise, you can maintain the performance and reliability of this high-performance storage device.

Value Solid State Drive

• Increased Read Speeds: The HPE 960GB SAS-12GBPS BC Read Intensive Value Solid State Drive provides increased read speeds compared to traditional hard disk drives (HDD). This allows for faster access to data, resulting in improved application performance and reduced wait times.
• Improved Reliability: The solid-state design of this drive eliminates the need for moving parts, which makes it more reliable and durable than traditional HDDs. This reduces the risk of data loss or corruption due to physical damage.
• Increased Endurance: The read intensive design of this drive makes it ideal for environments that require high levels of read operations, such as data centers and cloud storage. This drive can handle more read operations per second, resulting in increased endurance and longer lifespan.
• Lower Latency: The lack of mechanical components in this drive reduces the latency, or the delay between the time an application sends a request and the time it receives a response. This results in a faster and more responsive system.
• Energy Efficiency: The HPE 960GB SAS-12GBPS BC Read Intensive Value Solid State Drive consumes less power compared to traditional HDDs. This results in lower energy costs and reduced carbon footprint, making it a more environmentally friendly option.

In conclusion, the HPE 960GB SAS-12GBPS BC Read Intensive Value Solid State Drive provides improved performance, reliability, endurance, and energy efficiency compared to traditional HDDs. This makes it a great option for businesses looking to upgrade their storage systems for improved efficiency and cost savings.

The Energy Efficiency of SAS-12GBPS (Serial Attached SCSI-12GB per second) refers to the amount of energy consumed by the drive in relation to its data storage capacity and data transfer rate. The SAS-12GBPS standard was designed to increase the speed of data transfer and to reduce the energy consumption of storage devices.

The HPE P40506-X21 960GB SAS-12GBPS BC Read Intensive Value Solid State Drive has been designed to be energy efficient, as it is a read-intensive drive which means it consumes less energy compared to write-intensive drives. Additionally, the drive uses NAND flash memory which consumes less power compared to traditional mechanical drives.

The SAS-12GBPS standard also includes a feature known as Link Power Management, which allows the drive to dynamically adjust its power consumption based on the data transfer rate. This helps to conserve energy when the drive is idle and ensures that the drive consumes less energy compared to other storage devices.

In conclusion, the HPE 960GB SAS-12GBPS BC Read Intensive Value Solid State Drive is designed to be energy efficient and uses the SAS-12GBPS standard to minimize its energy consumption. This makes the drive an ideal choice for data centers and other environments where energy consumption is a concern.

• Brand Name: HPE
• Model Number or SKU# P40506-X21
• Device Type: Solid State Drive - Hot-Swap
• Capacity: 960 GB
• Form Factor: 2.5 inch SFF
• Interface: SAS 12Gbps
• NAND Flash Memory Type: Triple-level cell (TLC)
• Plug Type: Hot Pluggable
• Connectivity Type: Single
• Carrier Type: Basic Carrier (BC)
• Workload Type: Read Intensive
• Bundled with: HPE Basic Carrier (BC)
• Features: Digitally Signed Firmware (DS)
• Platform Supported: HPE Mainstream Compute Platforms
• Height: 15.00 mm

• Lifetime Writes (TB): 1750
• Endurance DWPD (Drive Writes Per Day): 1
• Drive Transfer Rate: 12 Gbps (external)
• MAX Seq. Reads Throughput (MiB/s): 810
• MAX Seq. Writes Throughput (MiB/s): 635
• Random Read Average Latency uSec (4KiB,Q1): 130
• Random Write Average Latency uSec (4KiB,Q1): 35
• Random Read IOPS (4KiB, Q=16): 105000
• Random Write IOPS (4KiB, Q=16): 32000
• MAX Random Read IOPS (4KiB): 155000@Q32
• MAX Random Write IOPS (4KiB): 32000@Q4

• Idle Time: 4.26 Watt
• Random Read: 5.00 Watt
• Random Write: 5.00 Watt
• Sequential Read: 6.71 Watt
• Sequential Write: 6.95 Watt
• Random Read/Write: 6.95 Watt
• MAX: 9.65Watt

• HPE ProLiant DL Series: DL20 Gen10 Plus , DL20 Gen10 Plus Base , DL20 Gen10 Plus Entry , DL20 Gen10 Plus High Performance , DL20 Gen10 Plus Performance , DL325 Gen10 Plus V2 , DL325 Gen10 Plus V2 Base , DL325 Gen10 Plus V2 for Weka Base Tracking , DL325 Gen10 Plus V2 Performance , DL345 Gen10 Plus , DL345 Gen10 Plus Base , DL345 Gen10 Plus Entry , DL360 Gen10 Plus , DL360 Gen10 Plus All-NVMe Server for Software Defined Storage , DL360 Gen10 Plus for Weka Base Tracking , DL360 Gen10 Plus Network Choice , DL365 Gen10 Plus , DL380 Gen10 Plus , DL380 Gen10 Plus Network Choice
• HPE ProLiant ML Series: ML30 Gen10 Plus , ML30 Gen10 Plus Entry , ML30 Gen10 Plus Performance
• HPE SimpliVity 325 Gen10 Plus V2 Node

Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model's matching features with your current system.