HPE P56130-001 16GB DDR4 3200mhz PC4-25600 Memory Dual Rank New

Introduction: In the world of computer hardware, memory modules are an essential component of any system. They play a crucial role in determining the performance and reliability of a computer. The HPE P56130-001 16GB Double Data Rate 4 (DDR4) 3200MHz PC4-25600 Dual Rank X8 CL22 288-pin Error Correction Code (ECC) Registered Dual In-line Memory Module (RDIMM) is a mouthful of a product name, but it represents a critical piece of technology used in HPE servers and workstations. In this detailed guide, we will break down each part of this lengthy product name, explaining its significance, features, and how it contributes to your computer's performance and data integrity.

The product name "HPE P56130-001 16GB DDR4 3200MHz RDIMM" may seem complicated, but it's a combination of various technical details. Let's break it down step by step:

HPE stands for Hewlett Packard Enterprise, a renowned company in the IT industry known for producing high-quality hardware and software solutions.

This is the unique part or model number assigned to this particular memory module. It helps in identifying and differentiating this specific product from others.

This indicates the capacity of the memory module. In this case, it's 16 gigabytes. Memory capacity determines how much data your computer can store and process at a given time.

DDR4 stands for Double Data Rate 4. It's a type of synchronous dynamic random-access memory (SDRAM) technology, which is an essential component of a computer's memory system. DDR4 is the fourth generation of this technology and offers improvements in terms of speed and efficiency over its predecessors.

The 3200MHz represents the memory module's clock speed. In simple terms, it determines how quickly the memory can process and transfer data. The higher the clock speed, the faster the memory can work.

PC4-25600 is a specific memory module standard that defines the data transfer rate and bandwidth. It's a technical specification that ensures compatibility and performance with your computer's memory controller.

Dual rank refers to how the memory module's memory banks are organized, which can affect performance. X8 refers to the organization of the memory chips on the module. These technical specifications influence the module's compatibility and performance.

CL22 stands for CAS Latency 22. CAS Latency is a measure of the delay in reading data from the memory module. A lower CAS Latency indicates better performance, but it's also influenced by other factors.

This specifies the number of pins on the memory module's connector. The number of pins determines how the module fits into the memory slot on the motherboard. It's crucial for compatibility.

Error Correction Code is a feature that adds a layer of data integrity to the memory module. It can detect and correct errors, making it particularly suitable for server and workstation environments where data accuracy is critical.

Registered memory modules, or RDIMMs, are designed for enhanced reliability and performance. They are commonly used in server and high-performance computing environments.

This part of the name indicates that the memory module is a genuine HPE product and includes "Smart Memory" technology. Smart Memory refers to intelligent memory modules that can optimize performance and reliability based on the specific requirements of HPE servers.

Now that we've broken down the product name, let's delve deeper into each of these aspects to understand their significance.

Memory capacity, often referred to as RAM (Random Access Memory), is a fundamental component of a computer's hardware. It plays a vital role in determining the computer's performance and capabilities. In the case of the HPE P56130-001 memory module, it offers a capacity of 16 gigabytes (GB). Here's why this matters:

A higher RAM capacity allows your computer to handle multiple tasks simultaneously. This is essential for tasks like video editing, 3D rendering, and running virtual machines.

With more RAM, your computer can store frequently used data, reducing the need to access slower storage devices like hard drives. This results in quicker data access and faster program loading times.

Gamers benefit from larger RAM capacities, as it enables smoother gameplay by storing game assets in memory for quick retrieval.

For professionals, more RAM can lead to improved productivity, especially when working with resource-intensive applications such as graphic design or data analysis software.

The "DDR4" in the product name stands for "Double Data Rate 4." It's a type of Synchronous Dynamic Random-Access Memory (SDRAM) technology. DDR4 represents the fourth generation of this technology, and it brings several advantages over its predecessors, including DDR3 and DDR2. Let's explore these advancements:

DDR4 memory offers significantly higher data transfer rates compared to DDR3. This means that data can be read and written to the memory module at a faster pace, leading to improved overall system performance.

DDR4 is more energy-efficient. It operates at lower voltages, which can reduce power consumption, making it an eco-friendly choice and potentially lowering energy costs.

The bandwidth of DDR4 memory is greater than that of DDR3, allowing for more data to be transferred in a given amount of time. This is crucial for tasks that involve large data sets.

DDR4 memory is designed with improved signal integrity, which enhances system stability and reliability, especially in demanding server and workstation environments.

The clock speed of a memory module, which is measured in megahertz (MHz), plays a vital role in its performance. The HPE P56130-001 module operates at 3200MHz. Here's what you need to know about clock speed:

A higher clock speed allows data to be transferred to and from the memory module at a quicker rate. This is crucial for applications that demand high-speed data processing, such as gaming and video editing.

Some users might consider overclocking their memory to run at speeds higher than the manufacturer's specification. However, this should be done with caution, as it can lead to stability issues if not done correctly.

The PC4-25600 standard is a technical specification that defines the memory module's data transfer rate and bandwidth. It's an important consideration when selecting memory for your computer. Let's break down what "PC4-25600" means:

The "PC4" part of the specification represents the data transfer rate of the memory module. In this case, it signifies DDR4 technology, which is commonly associated with PC4. DDR4 memory offers high data transfer rates, making it suitable for modern computing needs.

The "25600" part of the specification represents the memory module's bandwidth in megabytes per second (MB/s). In this case, "25600" indicates that the module can transfer 25,600 megabytes of data per second. This high bandwidth is valuable for tasks that require rapid data access, such as video editing and database management.

The terms "Dual Rank" and "X8" in the product name describe how the memory banks are organized and how data is stored on the memory module. These factors impact performance and compatibility:

Dual Rank memory modules have two sets of memory chips on each side of the module. This allows for better performance and is often preferred for servers and workstations. It's important to note that the motherboard's memory slots must support Dual Rank modules for proper operation.

The "X8" designation refers to the organization of memory chips on the module. In this case, "X8" means that each memory chip has 8 data I/O lines. The organization can affect the memory module's performance and compatibility with the memory controller on the motherboard.

It's crucial to check your motherboard's specifications to ensure compatibility with Dual Rank memory modules and the specific organization (X8 or X4) of the memory chips.

CAS Latency (CL) is a measure of the delay in reading data from the memory module. A lower CAS Latency indicates quicker data access, which can improve system performance. The HPE P56130-001 memory module has a CAS Latency of 22, which is a relatively standard value for DDR4 memory.

• Lower CAS Latency values result in faster data access and improved system responsiveness.
• The actual impact of CAS Latency on system performance can vary depending on the specific applications and workloads.

In general, while lower CAS Latency values are desirable, other factors such as clock speed and memory capacity also play a significant role in overall system performance. It's important to strike a balance between these factors to achieve optimal results for your specific use case.

The number of pins on a memory module's connector is essential for compatibility. The HPE P56130-001 memory module is designed with 288 pins. Here's why pin count matters:

Different DDR generations have different pin configurations. For example, DDR3 memory modules have 240 pins, while DDR4 modules have 288 pins. Ensuring the correct pin count is essential for proper installation.

Selecting DDR4 memory with the right pin count is a way to future-proof your system, as it's compatible with newer motherboards and CPUs that support DDR4 technology.

The Error Correction Code (ECC) is a crucial feature, especially for memory modules used in servers and workstations. ECC memory helps maintain data accuracy and reliability by detecting and correcting errors. Here's why ECC is significant:

In critical applications such as server environments, data integrity is paramount. ECC memory can detect and correct single-bit errors and detect multi-bit errors, ensuring that the data stored in memory remains accurate.

ECC memory is commonly used in servers and workstations where system stability and data accuracy are of utmost importance. Errors in memory can lead to system crashes and data corruption, which can be costly and damaging in these environments.

ECC memory may have a slight performance trade-off compared to non-ECC memory due to the additional error-checking processes. However, this trade-off is often acceptable in exchange for the added data integrity.

The term "Registered Dual In-line Memory Module" or RDIMM further specifies the type of memory module that HPE P56130-001 represents. Here's why this is significant:

Registered memory modules, such as RDIMMs, offer enhanced reliability and error correction capabilities. They are designed for use in high-stress environments, making them suitable for servers and workstations.

RDIMMs are known for their ability to support higher memory capacities compared to Unbuffered DIMMs (UDIMMs). This is important in server environments where large amounts of memory are often required.

RDIMMs, in combination with ECC support, provide a robust solution for data integrity. This is crucial in applications where data accuracy is a top priority.

The final part of the product name, "Genuine HPE Smart Memory Module," emphasizes that this memory module is an authentic HPE product and includes Smart Memory technology. Let's explore why this is significant:

When you purchase a genuine HPE product, you can be confident that it meets the company's high standards for quality and reliability. HPE Smart Memory undergoes rigorous testing to ensure compatibility and performance.

HPE Smart Memory is designed to work seamlessly with HPE servers and workstations. This compatibility reduces the risk of compatibility issues and simplifies the setup process.

HPE's Smart Memory technology is designed to optimize memory performance based on the specific requirements of HPE servers. It offers features like pre-failure alerts and performance tuning, enhancing system reliability and efficiency.

• Manufacturer: HPE
• Model Number or SKU# P56130-001
• Type: Memory (RAM)
• RAM Type: PC4-25600

• Storage Capacity: 16GB
• Memory Type: DDR4 SDRAM (288-pin DIMM)
• Number of Modules: 1 x 16GB
• Memory Speed: 3200MHz (PC4-25600)
• Features: Dual Rank x8, Registered
• Error Checking: ECC (Error-Correcting Code)
• Voltage: 1.2V
• Latency Timings: CL22
• Upgrade Type: Designed for Specific Systems
• Device Supported: Servers

In summary, the HPE P56130-001 16GB DDR4 3200MHz RDIMM is a memory module designed for use in high-performance computing environments, particularly in HPE servers and workstations. Each component of its lengthy product name holds significance:

• Capacity (16GB): Determines the amount of data the module can store and process.
• DDR4 Technology: Represents the fourth generation of SDRAM, offering improved speed and efficiency.
• Clock Speed (3200MHz): Influences data transfer speed and overall system performance.
• PC4-25600 Standard: Specifies data transfer rate and bandwidth.
• Dual Rank and X8 Configuration: Organizes memory banks and data I/O lines.
• CAS Latency (CL22): Measures the delay in data access.
• Pin Count (288-pin): Must match motherboard slots for compatibility.
• Error Correction Code (ECC): Enhances data integrity by detecting and correcting errors.
• Registered (RDIMM): Provides improved reliability and data integrity.
• Genuine HPE Smart Memory Module: Ensures quality, compatibility, and the benefits of Smart Memory technology.