MTFDDAK7T6TDS-1AW16ABYY Micron SATA 7.68TB 6GBPS SSD Call Refurbished

The Micron MTFDDAK7T6TDS-1AW16ABYY is a high-performance enterprise-grade solid-state drive (SSD) with a storage capacity of 7.68TB. It uses the SATA 6 Gbps interface, which is a widely-used interface for connecting storage devices to a computer and it is intended for use in data centers and other enterprise environments where high-performance, high-capacity storage is required.

This specific model has all the features of the previous version that you've described before:

• Advanced wear leveling and error correction to ensure data integrity and prolong the life of the drive
• TCG Encryption for security and prevention of unauthorized access to data
• Power Loss Protection (PLP) to prevent data loss during power interruption

The model number extension "ABYY" may represent some additional internal differences from the other models you've described, such as firmware version or packaging. But it generally has the same features and characteristics of the other model.

The performance of the Micron 7.68TB SSD will depend on the specific model and configuration of the drive, as well as the usage conditions and the system it's being used in.

In general, as an SSD, it is expected to have faster read and write speeds compared to traditional hard disk drives (HDDs). The drive uses 3D TLC (triple-level cell) NAND flash memory which is slower than SLC or MLC but offer higher storage density. The drive also uses a SATA 6 Gbps interface, which provides faster data transfer speeds compared to previous versions of the SATA interface.

It's important to note that performance can also be impacted by the workload and usage conditions of the drive. For example, an SSD may perform differently in a read-intensive workload versus a write-intensive workload, or in a highly concurrent environment versus a single-user environment.

Additionally, the drive will have a rating for the maximum Input-Output Operations Per Second (IOPS) and Throughput (MB/s) that it can deliver. This can be used as a general measure of performance, and is provided by the manufacturer. However, it is important to note that real-world performance may differ from these ratings depending on the usage conditions.

I suggest checking the manufacturer's specifications for the drive you're interested in, which should provide detailed information on its performance characteristics.

In summary, the Micron 7.68TB SSD is expected to have faster read and write speeds compared to traditional HDDs, but the specific performance will vary depending on the specific model and configuration of the drive, as well as the usage conditions and the system it's being used in.

Backing up and restoring data on a Micron 7.68 terabyte (TB) SATA 6 Gbps SSD can be done using standard backup and restore software or methods. Some common options include:

• File-level backups: This involves creating a copy of specific files or folders on the SSD and saving them to a separate storage device or location, such as an external hard drive or a cloud service. This method is useful for backing up individual files or specific groups of files, such as documents or photos.
• Image-based backups: This involves creating a complete image of the SSD, including the operating system, applications, and all data. This method is useful for restoring an entire system to a previous state, including all settings and configurations.
• Cloud Backup: This method involves using cloud services to backup the data, it can be done using a software provided by the cloud provider or using third party backup software that uses the cloud storage as backup destination. This method provides an off-site storage and can help in case of disaster recovery scenarios.

It's important to note that the backup and restore method must be compatible with the operating system and file system that are being used, and that the backup should be tested and regularly verified to ensure that it can be properly restored in case of a failure. Also, the backup should be stored in a different location or media in case of physical damage or destruction of the original storage.

• Manufacturer: Micron
• Part Number or SKU# MTFDDAK7T6TDS-1AW16ABYY
• Product Type: Solid State Drive (SSD)
• Interfaces: SATA 6GBPS

• SSD Class: Server/Enterprise
• SSD Capacity: 7.68TB/7680GB
• SSD Form Factor: 2.5 Inch
• SSD Host Interface: SATA 3.0 (6 GB/s)
• Model/Series/Type: 5300P (PRO)

• Micron® 3D TLC NAND Flash
• Three Performance/Endurance Levels
• BOOT
• PRO
• MAX
• TCG Enterprise and TCG Opal Compliant Self-Encrypting Drive (SED) Options
• ATA Modes Supported
• PIO Mode 3, 4
• Multiword DMA Mode 0, 1, 2
• Ultra DMA Mode 0, 1, 2, 3, 4, 5, 6
• 512-Byte Sector Size Support
• Hot-Plug Capable (2.5-Inch Only)
• Native Command Queuing Support With 32-Command Slot Support
• ATA-8 ACS-4 Command Set Compliant
• ATA Security Feature Command Set and Password Login Support
• Security Erase Command Set: Fast and Secure Erase

• Sequential 128KB Read: Up to 540 MB/S
• Sequential 128KB Write: Up To 520 MB/S
• Random 4KB Read: Up To 95,000 IOPS
• Random 4KB Write: Up To 75,000 IOPS

Endurance

• Total Bytes Written (TBW)
• BOOT: Up to 613TB
• PRO: Up to 9110TB
• MAX: Up to 24,528TB

Reliability

• MTTF: 3.0 Million Device Hours2
• Static and Dynamic Wear Leveling
• Uncorrectable Bit Error Rate (UBER): <1 Sector Per 1017 Bits Read
• End-To-End Data Protection
• Enhanced Power-Loss Data Protection with Data Protection Capacitor Monitoring
• Self-Monitoring, Analysis, And Reporting Technology
• (SMART) Command Set

Mechanical

• 2.5-Inch X 7.0mm Form Factor
• M.2 Type 2280 Form Factor
• ROHS-Compliant Package
• Secure Field-Upgradeable Firmware With Digitally
• Signed Firmware Image
• Power Consumption: 240GB/480GB: <3.0W (TYP);
• 960GB: <3.4W (TYP); 1920GB: <3.8W (TYP);
• 3840GB/7680GB: <3.9W (TYP)

Operating Temperature

• Commercial (0°C to 70°C) 4

Compliance

• Micron SSDS Comply With The Following
• Micron Green Standard
• Built With Sulfur Resistant Resistors
• CE (Europe): EN 55032 Class B, Rohs
• FCC: CFR Title 47, Part 15 Class B
• UL/Cul: Approval to UL-60950-1, 2nd Edition, IEC 60950-1:2005 (2nd Edition); EN
• 60950-1 (2006) + A11:2009+ A1:2010 + A12:2011 + A2:2013
• BSMI (Taiwan): Approval To CNS 13438 Class B And CNS 15663
• RCM (Australia, New Zealand): AS/NZS CISPR32 Class B
• KC RRA (Korea): Approval To KN32 Class B, KN 35 Class B
• IC (Canada): ICES-003 Class B
• This Class B Digital Apparatus Complies With Canadian ICES-003.
• Cet Appareil Numérique De La Classe B Est Conforme À La Norme NMB-003 Du Canada.
• Morocco: approval to EN55032/EN55024 Class B
• UkrSEPRO (Ukraine): EN55032 Class B, IEC60950/EN60950, RoHS (Resolution 2017
• No. 139)

Dimensions & Weight

• Height: 0.63 inch
• Width: 3.10 inch
• Depth: 5.45 inch
• Weight: 1.50 LBS

Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model's matching features with your current system.