Here are the steps to install and configure the QLE2662-CK QLogic Sanblade 16GB Dual Channel PCI-Express Fiber Channel Host Bus Adapter:
- Shut down your server and unplug it from the power source.
- Open the server case and locate an available PCIe slot.
- Carefully insert the QLE2662-CK HBA into the PCIe slot and secure it with a screw.
- Connect the fiber optic cables to the HBA ports and the SAN or storage system.
- Close the server case and reconnect the power source.
- Power on the server and wait for the operating system to detect the HBA.
- Install the QLogic drivers and management software provided with the HBA. You can download the latest version of the drivers and software from the QLogic website.
- Configure the HBA settings using the management software. This may include setting the SAN boot order, configuring port settings, and enabling/disabling features such as T10 Protection Information (T10-PI) and Fibre Channel over Ethernet (FCoE).
- Verify the HBA is functioning correctly by checking the device manager for any errors or warnings.
- Connect to the SAN or storage system and verify that the server can access the storage resources.
The QLE2662-CK QLogic Sanblade 16GB Dual Channel PCI-Express Fiber Channel Host Bus Adapter is designed to provide high-performance and low-latency connectivity to storage devices through a Fibre Channel network.
In terms of performance, the QLE2662-CK supports up to 1.2 million IOPS (Input/Output Operations Per Second) and up to 12,800 MB/s throughput (maximum transfer rate). These numbers are dependent on the configuration of the host system, the network environment, and the storage devices being used.
The QLE2662-CK is a dual-channel adapter, meaning it can support two Fibre Channel connections simultaneously, providing redundancy and load balancing capabilities. The adapter supports both 16Gbps and 8Gbps Fibre Channel protocols, allowing it to be used with a wide range of storage devices.
The QLE2662-CK also includes features such as virtualization support, which enables multiple virtual machines to share a single adapter, and hardware offload capabilities to reduce CPU utilization.
Troubleshooting and Diagnostic Tools for QLE2662-CK QLogicThe QLE2662-CK QLogic Sanblade 16GB Dual Channel PCI-Express Fiber Channel Host Bus Adapter is a hardware component used to connect servers to storage networks. If you're experiencing issues with this adapter, there are a few troubleshooting and diagnostic tools you can use to identify and resolve the problem. Here are some suggestions:
- QConvergeConsole (QCC): This is a web-based management tool that allows you to manage and monitor your QLogic adapters. QCC provides real-time information about adapter performance, and you can use it to update firmware, change adapter settings, and run diagnostic tests.
- QLogic Diagnostic Tool (QLDT): This tool is designed to test the functionality of QLogic adapters. It can be used to test the adapter hardware, firmware, and driver. QLDT includes a wide range of diagnostic tests, including loopback tests, link tests, and stress tests.
- Fibre Channel Trace (FC Trace): This is a utility that allows you to capture and analyze Fibre Channel traffic. You can use FC Trace to troubleshoot connectivity issues, performance problems, and other issues related to the Fibre Channel network.
- QLogic Support Assistant (QSA): This is a diagnostic tool that can be used to troubleshoot issues with QLogic adapters. QSA collects diagnostic information from the adapter and generates a report that can be used by QLogic support to identify the problem.
- Performance Monitoring: You can use performance monitoring tools like Windows Performance Monitor or third-party monitoring tools to monitor the performance of the adapter. Performance monitoring can help you identify performance issues and bottlenecks that may be affecting the adapter.
- Brand Name : QLogic
- MPN : QLE2662-CK
- Sub-Type : Fiber Channel
- Type : Controller
- Form Factor : Plug-in Card
- Product Type: Network Interface Card
- Data Transfer Rate: 16 GGBPS
- Interface / Connectivity: PCI-Express
- Number of Port(s): 2
- Ports Type: LC
Here, you can check more available conditions of your desired product QLE2662-CK at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.
Other Available Conditions for this Part
Other Available Categories For - Controller - Fiber Channel
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
