C2811-15UC-VSEC/K9 Cisco Integrated Services Router Factory New

The Cisco C2811-15UC-VSEC/K9 is an integrated services router that is designed for use in small to medium-sized businesses and enterprise branch offices. It is part of the Cisco 2800 series of routers and supports various advanced security features.

• Firewall features: The router has built-in firewall capabilities that can be used to protect the network from unauthorized access and to filter out unwanted traffic.
• VPN features: The router supports virtual private network (VPN) capabilities that allow for secure communication between remote sites.
• Intrusion prevention and detection (IPS/IDS): The router has built-in IPS and IDS features that can be used to detect and prevent network intrusions.
• Security policy management: The router provides a centralized management interface for security policies, which allows administrators to easily configure and manage security settings.
• Advanced Malware Protection (AMP): The router has built-in AMP capabilities that can be used to detect and prevent malware from entering the network.
• Encryption: The router supports various types of encryption, such as IPsec, SSL and TLS, which can be used to secure network traffic.
• Network admission control: The router supports Network Admission Control (NAC) which allows for the enforcement of security policies for devices that connect to the network, such as endpoint security check.
• Cisco Identity Services Engine (ISE): It is a security management platform that provides secure access to network resources, policy enforcement and threat defense capabilities.

These advanced security features are designed to help ensure that the C2811-15UC-VSEC/K9 can provide secure and reliable services to small to medium-sized businesses and enterprise branch offices in which the security is a critical requirement.

The Cisco C2811-15UC-VSEC/K9 is an integrated services router that is designed for use in small to medium-sized businesses and enterprise branch offices. It is part of the Cisco 2800 series of routers and supports various Quality of Service (QoS) capabilities to help ensure that network services remain up and running and that the router is operating at optimal performance.

• Class-Based Weighted Fair Queuing (CBWFQ): This QoS feature allows for the prioritization of different types of traffic, such as voice, video, and data, to ensure that high-priority traffic is given priority over lower-priority traffic.
• Low Latency Queuing (LLQ): LLQ is a feature which allows for the prioritization of delay-sensitive traffic, such as voice and video, to ensure that this traffic is given priority over other traffic.
• Weighted Random Early Detection (WRED): This QoS feature helps to prevent network congestion by randomly dropping lower-priority traffic when the network becomes congested.
• Policy-Based Routing (PBR): PBR allows for the routing of specific types of traffic based on specified policies, which can be used to ensure that certain types of traffic are sent over specific paths.
• Quality of Service (QoS) Pre-classify: This feature allows the router to pre-classify the traffic and apply the appropriate QoS policies before the packet is forwarded, thus it reduces the processing time and improves the performance.

These QoS capabilities are designed to help ensure that the C2811-15UC-VSEC/K9 can provide efficient and reliable services by prioritizing and managing the network traffic according to the network's needs.

The Cisco C2811-15UC-VSEC/K9 is designed to provide high availability and redundancy to ensure that network services remain up and running in the event of a failure. Some of the key features that contribute to the router's high availability and redundancy include:

• Dual-redundant, modular power supplies: The router has two power supplies that can be used in an active/standby or active/active configuration to ensure that power is always available to the router, even if one power supply fails.
• Redundant supervisor engine: The router has two supervisor engines that can be used in an active/standby configuration to ensure that control plane functions are always available, even if one supervisor engine fails.
• Non-stop forwarding (NSF) and Stateful Switchover (SSO): The router supports NSF with SSO, which allows the router to continue forwarding traffic during a switchover of the supervisor engine, without any interruption in the forwarding plane.
• Hot-swappable interface cards: The interface cards in the router can be replaced while the router is running, which helps minimize downtime.
• Redundant route processors: The router has two route processors that can be used in an active/standby configuration to ensure that routing functions are always available, even if one route processor fails.
• Virtual Router Redundancy Protocol (VRRP): VRRP is a routing protocol that provides redundancy by allowing multiple routers to share a virtual IP address, so if one router fails, another router takes over the virtual IP address, ensuring that network services remain up and running.

These features are designed to help ensure that the C2811-15UC-VSEC/K9 can provide highly available and redundant services to small to medium-sized businesses and enterprise branch offices in which the continuous availability is a critical requirement.

• Manufacturer Cisco Systems, Inc
• Manufacturer Part Number C2811-15UC-VSEC/K9
• Brand Name Cisco
• Product Type Integrated Services Router
• Product Model 2811
• Product Name 2811 Integrated Services Router
• Product Series 2800

• Number of Ports: 2
• Fast Ethernet Port: Yes
• Interfaces/Ports:
• 2 x RJ-45 10/100Base-TX LAN
• 2 x USB
• 1 x Console Management
• 1 x Auxiliary Management

Media & Performance

• Connectivity Media: Twisted Pair 10/100Base-TX

I/O Expansions

• Number of Expansion Slots: 11
• Expansion Slots:
• (2 Total /1 Free /1 Populated) AIM
• (4 Total) HWIC
• (1 Total) Network Module
• (1 Total) EVM
• (3 Total /2 Free /1 Populated) PVDM
• Modules: 1 x PVDM2-32 Packet Voice/Fax DSP Module

Management & Protocols

• Management:
• Simple Network Management Protocol (SNMPv3)
• Quality of Service (QoS)
• VLAN
• Web-based management
• Cisco Router and Security Device Manager (SDM)
• Security Features:
• DES
• 3DES
• AES 128, 192 and 256
• Cisco IOS Software Firewall
• Secure Sockets Layer (SSL)
• Network Admissions Control (NAC)
• Intrusion Prevention System (IPS)

Memory

• Standard Memory: 256 MB
• Maximum Memory: 1 GB
• Memory Technology: DRAM
• Flash Memory: 128MB
• Software
• Operating System: Cisco IOS 12.3(8)T

• Input Voltage:
• 110 V AC
• 220 V AC
• Input Voltage Range: 100 V AC to 240 V AC
• Power Source: Power Supply
• Redundant Power Supply: Yes

Please contact us over the phone or ask for live chat/help if you have any questions about the estimated time of arrival for any "lead time required" item.