WS-C4510R+E Cisco Catalyst 4500E 10 Slot Layer 3 Switch Refurbished

Easy Installation and Management

The WS-C4510R+E Cisco Catalyst 4500E 10 Slot Switch Chassis is designed to be easy to install and manage. The following steps can help simplify the process:

• Review Technical Documentation: Before installing the switch, organizations should review the technical documentation, including the hardware installation guide, to ensure that the switch is installed correctly.
• Prepare the Switch: Before installing the switch, it is important to ensure that the rack, power, and cooling are ready and that the necessary cables are available.
• Install the Switch: The switch can be installed in a standard 19-inch rack, and the hardware installation guide provides step-by-step instructions for the installation process.
• Connect to the Switch: The switch can be managed through the command line interface (CLI) using Telnet or Secure Shell (SSH) for remote management, or through the graphical user interface (GUI) using a web browser.
• Configure the Switch: The switch can be configured using the CLI or the GUI, and the technical documentation provides detailed instructions for configuring various features and settings.
• Monitor the Switch: Regularly monitoring the switch using network management tools, such as Cisco Prime Infrastructure, can help identify and resolve performance issues quickly.
• Update the Switch: Regularly updating the switch's firmware can help resolve known bugs and vulnerabilities, as well as provide new features and improvements to the switch.

Reliability of L3 Switch Chassis

The WS-C4510R+E Cisco Catalyst 4500E 10 Slot Switch Chassis is designed to provide high-reliability in enterprise and data center networks. Some of the key features that contribute to its high-reliability include:

• Redundant components: The switch chassis is designed with redundant power supplies and fans, which ensures that the switch will continue to operate even if one of these components fails.
• High availability: The chassis is designed for high availability, meaning it is built to minimize downtime in case of any failure.
• Advanced software features: The switch chassis runs on Cisco IOS software, which includes advanced features such as hot-standby router protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP) which enables redundancy and failover capabilities.
• Flexible design: The switch chassis is designed to be modular, which allows for flexibility in terms of the number and type of interfaces that can be added to the switch. This allows for the switch to be tailored to the specific needs of the network environment.
• Quality of Service (QoS): The switch chassis supports Quality of Service (QoS) to ensure that critical traffic is prioritized and that the network is able to handle high volumes of traffic.
• Advanced security features: the chassis supports various advanced security features such as Access Control Lists (ACLs) and Quality of Service (QoS) to help protect the network from unauthorized access and to prioritize critical traffic.

Compliant Standards

This item is a Cisco Catalyst 4500E series switch. It is a 10-slot chassis that supports Layer 3 switching and routing capabilities. The switch is compliant with several industry standards, including:

• IEEE 802.3: This standard defines the physical layer and data link layer specifications for Ethernet. The WS-C4510R+E supports 10/100/1000 Mbps Ethernet operation, which is compliant with this standard.
• IEEE 802.3ab: This standard specifies the physical layer and data link layer specifications for Gigabit Ethernet over copper cables using the 1000BASE-T (twisted pair) connector.
• IEEE 802.3u: This standard specifies the physical layer and data link layer specifications for Fast Ethernet (100 Mbps) operation over copper cables using the 100BASE-TX and 100BASE-T4 connectors.
• IEEE 802.3z: This standard specifies the physical layer and data link layer specifications for Gigabit Ethernet over optical fiber cables using the 1000BASE-SX, 1000BASE-LX, and 1000BASE-LX10 connectors.
• IEEE 802.3x: This standard specifies the flow control mechanism for full-duplex operation in Ethernet networks.
• IEEE 802.1D: This standard defines the Spanning Tree Protocol (STP) used to prevent loops in a network.
• IEEE 802.1Q: This standard defines Virtual LANs (VLANs) and VLAN tagging for Ethernet networks.
• IEEE 802.1s: This standard defines Multiple Spanning Tree Protocol (MSTP) which provides a mechanism for multiple VLANs to share a single spanning tree.
• IEEE 802.1w: This standard defines Rapid Spanning Tree Protocol (RSTP) which provides faster convergence than STP.

By being compliant with these standards, the model switch ensures compatibility with other devices and networks that comply with the same standards. This allows for seamless integration and interoperability in various types of networks. Additionally, the switch supports Cisco's proprietary technologies such as Flexible Netflow, vPC, and Virtual Switching System (VSS) .

Detail Information about this Cisco WS-C4510R+E

• Manufacturer: Cisco
• Part Number or SKU# WS-C4510R+E
• Product Line: Catalyst
• Product Series: 4500E
• Product Type: Switch Chassis

I/O Expansions of Switch Chassis

• Number of Total Expansion Slots: 10
• 3 Layer Supported Switch Chassis
• Expansion Slot Type Supervisor Engine
• Expansion Slot Type: Line Card

Network & Communication for Slots: 10 Chassis

• PoE (RJ-45) Port: Yes
• Layer Supported: 3

Environmental Parameters of Catalyst 4500E Switch

• Min Operating Temperature: 32 °F
• Max Operating Temperature: 104 °F
• Humidity Range Operating: 10 - 90% (non-condensing)

Management & Protocols

• Manageable: Yes
• VLAN
• QoS
• SNMP
• CLI
• MIB

Reliability

• MTBF: 179714 Hour

Power Description

• Power Device: Internal power supply - hot-plug
• Installed Qty: 0 (installed) / 2 (max)
• Power Redundancy: Optional
• Power Redundancy Scheme: 1+1 (with optional power supply)

Dimensions & Weight

• Width: 17.3 inch
• Depth: 12.5 inch
• Height: 24.3 inch
• Weight: 54.52 LBS

Miscellaneous

• Rack Mounting Kit: Included
• Compliant Standards: NEBS level 3, FCC Class A certified, CISPR 22 Class A, EN 60950, EN 61000-3-2, EN55022, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, EN50082-1, CSA 22.2 No. 60950, EN 61000-6-1, ACA TS001, AS/NZS 3260, FCC Part 68, AS/NZ 3548 Class A, JATE, ICES-003 Class A, CS-03, FCC CFR47 Part 15