More Information
The HP 379300-S21 is a server memory module manufactured by HP. It has a capacity of 4GB and runs at a speed of 400 MHz using PC-3200 memory specification with CL3 latency. It is a ECC (Error Correction Code) Registered DDR SDRAM memory module and uses 240-pin DIMM form factor.
ECC memory includes extra memory bits that are used to detect and correct errors that occur in the memory, which can help to improve the reliability and stability of the system. ECC memory is typically more expensive than non-ECC memory and also takes up more memory capacity.
Registered memory, also called buffered memory, includes a buffer chip that is used to improve the reliability of the memory module, this can help in systems with many DIMMs or with high memory population. This can help to prevent data corruption and also can help to improve the system stability.
It is important to note that this memory is using DDR technology, which is an older memory technology, it is being phased out in favor of newer DDR2 and DDR3. So it might be limited in certain server or system and also could affect the overall performance.
It's important to check the specific compatibility with the server or system that you plan to use this memory module with. The memory architecture of the server, the number of memory slots available, the maximum capacity and the clock speed of the memory should be considered. It's also important to check the server documentation or specifications to ensure the compatibility and the installation instructions.
In summary, the HP 379300-S21 memory module is designed for servers and offers a reliable solution for servers that require ECC memory with a capacity of 4GB and runs at a speed of 400 MHz, however it's using an older technology, DDR and it might be limited in certain servers and system, also can affect the overall performance. It's important to ensure the compatibility before purchasing and consider the age of the technology and how this will affect the overall performance and limitation of your server.
HP Server Memory
The HP 379300-S21 is a server memory module manufactured by HP. It has a capacity of 4GB and runs at a speed of 400 MHz using PC-3200 memory specification with CL3 latency. It is a ECC (Error Correction Code) Registered DDR SDRAM memory module and uses 240-pin DIMM form factor.
ECC memory includes extra memory bits that are used to detect and correct errors that occur in the memory, which can help to improve the reliability and stability of the system. ECC memory is typically more expensive than non-ECC memory and also takes up more memory capacity.
Registered memory, also called buffered memory, includes a buffer chip that is used to improve the reliability of the memory module, this can help in systems with many DIMMs or with high memory population. This can help to prevent data corruption and also can help to improve the system stability.
It is important to note that this memory is using DDR technology, which is an older memory technology, it is being phased out in favor of newer DDR2 and DDR3. So it might be limited in certain server or system and also could affect the overall performance.
It's important to check the specific compatibility with the server or system that you plan to use this memory module with. The memory architecture of the server, the number of memory slots available, the maximum capacity and the clock speed of the memory should be considered. It's also important to check the server documentation or specifications to ensure the compatibility and the installation instructions.
In summary, the HP 379300-S21 memory module is a 4GB server memory module manufactured by HP, designed to provide a high level of reliability and performance for servers. It's built with ECC and Registered memory features that can help to improve the reliability and stability of the system, however it's using an older DDR technology which could limit its performance and also its compatibility with modern servers. It's important to ensure the compatibility before purchasing and consider the age of the technology and how this will affect the overall performance and limitation of your server.
High Performance
The performance of the HP 379300-S21 memory module will depend on several factors, such as the overall system configuration, the specific use case, and the workloads of the server.
The memory module has a capacity of 4GB which should be sufficient for running multiple applications at the same time and handling large amounts of data. However, the memory speed of 400MHz is lower than newer memory technologies such as DDR2 and DDR3, which could limit its performance when running high-performance workloads or with modern servers.
Additionally, the memory module uses the older DDR technology, which has lower bandwidth and lower speed compared to newer DDR2 and DDR3 memory technology, that can affect the overall performance of the server.
It is important to note that the performance of this memory module will depend on the specific use case and the overall system configuration. It's highly recommended to consult the vendor's documentation or specifications to ensure the compatibility, the installation instructions, and how this module will perform in your specific scenario, also check the overall system configuration and workloads, to ensure that the memory is able to meet the requirements.
In summary, The HP 379300-S21 memory module offers a decent capacity of 4GB but has a lower memory speed of 400MHz which could limit its performance when running high-performance workloads or with modern servers, Additionally it uses an older DDR technology that could affect the overall performance of the system. It's important to ensure the compatibility before purchasing and consider the age of the technology and how this will affect the overall performance and limitation of your server.
General Information
Brand Name: HPMPN: 379300-S21
Type: Memory (RAM)
RAM Type: PC-3200
Product Name: 4GB DDR SDRAM Memory Module
SKU: 379300-S21
Technical Information
Storage Capacity: 4GBMemory Technology: DDR SDRAM
Number Of Modules: 2 X 2GB
Memory Speed: 400mhz DDR400/PC-3200
Data Integrity Check: Ecc
Signal Processing: Registered
Cas Latency Timings: Cl3
Platform Support: Proliant Server
Physical Characteristics
Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)Weight: 0.45 Kg (1 Lb)
Compatibility:
Proprietary HP Proliant Server - Bl35pProprietary HP Proliant Server - Bl25p
Proprietary HP Proliant Server - Bl45p
Proprietary HP Proliant Server - Dl385
Proprietary HP Proliant Server - Dl585
About New Bulk Pack Products
PC-3200
Double Data Rate RAM modules have revolutionized the networking platforms. No matter if you're a layman doing some computations while sitting in your room or an electronic engineer handling the bulky server rooms and business centers, memory plays an important role! Thus, the most common type of memory module currently in demand is the Double Data Rate (DDR) SDRAM. There are plenty of pieces of evidence why one must keep their hands on the SDRAM instead of DRAM in terms of organizing the data effectively. We, at ALLHDD, will guide you with the best available choice in the DDR category, i.e., PC3200. Here's what you need to know about this DDR SDRAM before you make a deal!
DDR SDRAMs is a Stack of Acronym!
Not all the RAM or memory modules are synchronous. DRAMs were introduced back in the 1970s and still follow the same principle. DRAM memory chips are not regulated or controlled by the clocks. Hence, they cannot offer faster data rates as the SDRAM does!
SDRAM (especially these DDR ones) are fully synchronous and can be regulated by the clock for signaling. Moreover, one additional attribute that makes the difference is the fetching data at both ends, i.e., leading-edge and falling edge. That's why the DDR memory is featured with the ''Double Data Rate'' tag!
The First SDRAM Memory to Steal the Show!
DDR is the first SDRAM memory that supports the Synchronous RAM technology and doubles its predecessors' speed and overall performance. This first incarnation has fulfilled the faster loading speed goals by ensuring the data transfer twice per cycle. This way, the single data rate SDRAMs were forced out of the race.
PC3200 RAM Follows the Tight Timing Controls:
The fact that the SDRAM follows the faster route or improves the data transfer relies on the double data transfer rate on both the edges. For this purpose, a very tight timing control option is being followed by the PC3200 DDR RAM.
Apart from faster data loading speed, the signal integrity is also ensured- which had been an exact issue. There are plenty of models for the DDR SDRAM with different memory clock speeds and performance. The 4GB SDRAMs are all ECC certified and perfected DIMM memory kits. On the flip side, 16GB dual-channel memory has 400 MHz and 184 pins to deal with the Intel and AMD models.
Absolute CAS Latency to Read and Write:
This DDR PC3200 memory follows a certain latency option with an ''activate'' and ''read'' command. After an absolute latency, the data is being available with faster loading times. Moreover, this PC3200 SDRAM has two memory locations per cycle, ensuring the burst of data in the form of two, four, or eight memory locations. All in all, this memory module can regulate the four memory locations in the consecutive clock cycles.
Why Choose ALLHDD?
ALLHDD has never disappointed its customers in terms of the quality and durability of any hardware equipment. Thus, occupying first place in networking hardware dealing, we're here with the PC3200 DDR Memory category featuring 4GB and 16GB models.Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
