Maintenance and Care for the HPE 3TB Internal Hard Drive
Proper maintenance and care of the HPE 3TB 7.2K RPM SATA 6Gbps Midline Internal Hard Drive can help ensure optimal performance and reliability over the drive's lifespan. Here are some key maintenance and care tips to keep in mind:
- Avoid physical shocks: The hard drive should be handled with care to avoid physical shocks, which can damage the internal components and cause data loss. Always store and transport the drive in an anti-static bag or container to prevent damage from electrostatic discharge (ESD).
- Keep the drive clean: Dirt, dust, and debris can cause the drive to overheat or fail. Use a soft, lint-free cloth to clean the drive's exterior and make sure to keep the drive in a clean and dust-free environment.
- Ensure proper ventilation: The hard drive generates heat during operation, so it's important to ensure proper ventilation to prevent overheating. Make sure the drive is installed in a well-ventilated area with adequate airflow to prevent the drive from overheating.
- Use a stable power supply: The hard drive should be connected to a stable power supply to prevent power surges or drops, which can damage the drive's internal components. Use a high-quality power supply with surge protection to help ensure reliable operation.
- Perform regular backups: Regular backups are an essential part of data storage management. Backing up data regularly can help prevent data loss in case of hard drive failure.
- Use monitoring and diagnostic tools: HPE provides monitoring and diagnostic tools to help monitor the health and performance of the hard drive. Use these tools to identify potential issues before they become serious problems.
- Follow manufacturer recommendations: Follow the manufacturer's recommendations for maintenance, care, and usage of the hard drive. This can help ensure optimal performance and reliability over the drive's lifespan.
Reliability and Durability
The HPE 3TB 7.2K RPM SATA 6Gbps Midline Internal Hard Drive is designed to be a highly reliable and durable storage device, with features and technologies that help ensure optimal performance and long-term data retention.
One of the key features that contribute to the reliability and durability of the HPE 3TB Internal Hard Drive is its use of advanced error correction and detection technologies. The drive is equipped with a range of error detection and correction mechanisms, including cyclic redundancy checks (CRC), parity checking, and low-density parity check (LDPC) codes. These technologies help to detect and correct errors that can occur during data transfer, ensuring that data is stored and retrieved accurately.
The HPE 3TB Internal Hard Drive is also designed to be highly durable, with a rugged construction that can withstand a range of environmental conditions. The drive is tested and certified to meet a range of industry standards for shock, vibration, and temperature, ensuring that it can withstand the rigors of use in a wide range of environments.
In addition, the drive is designed to have a long service life, with a mean time between failures (MTBF) of up to 1.2 million hours. This means that the drive is designed to operate continuously for extended periods of time, with a low risk of failure or downtime.
The HPE 3TB Internal Hard Drive also features a number of advanced technologies that help to ensure data integrity and retention over the long term. These include techniques such as advanced wear-leveling algorithms and error-correcting code (ECC), which help to ensure that data is stored reliably and accurately over the lifetime of the drive.
Comparison with Other Internal Hard Drives in the Market
The HPE 3TB 7.2K RPM SATA 6Gbps Midline Internal Hard Drive is just one of many internal hard drives available on the market today. Here are some key points of comparison with other internal hard drives in the market:
- Capacity: The HPE 3TB Internal Hard Drive offers a storage capacity of 3TB, which is a high-capacity option that is suitable for storing large amounts of data. Other internal hard drives are available with a range of storage capacities, from a few hundred gigabytes to several terabytes.
- Speed: The HPE 3TB Internal Hard Drive features a spindle speed of 7,200 RPM, which is a moderate speed that offers a good balance between performance and cost. Other internal hard drives are available with a range of spindle speeds, from 5,400 RPM to 15,000 RPM.
- Interface: The HPE 3TB Internal Hard Drive uses the SATA 6Gbps interface, which is a widely-used interface that provides fast data transfer speeds and good compatibility with a range of systems. Other interfaces, such as SAS and NVMe, are also available on the market.
- Form factor: The HPE 3TB Internal Hard Drive is a 3.5-inch form factor, which is a standard size for desktop computers and servers. Other form factors, such as 2.5-inch and M.2, are also available on the market.
- Price: The HPE 3TB Internal Hard Drive is priced competitively with other internal hard drives in its class. The price of internal hard drives varies depending on the brand, capacity, speed, and interface.
- Reliability: The HPE 3TB Internal Hard Drive is designed to be a highly reliable and durable storage device, with a range of features and technologies that help ensure optimal performance and long-term data retention. Other internal hard drives vary in their reliability and durability, depending on the manufacturer and model.
In general, the HPE 3TB Internal Hard Drive offers a good balance of capacity, speed, and price, and is a reliable and durable storage option for a wide range of applications. When comparing with other internal hard drives in the market, it's important to consider factors such as capacity, speed, interface, form factor, price, and reliability, in order to find the best option for your specific needs.
- Manufacturer: HPE
- MPN: 861693-K21
- Type : Internal Hard Disk Drive (HDD)
- HDD Type : SATA 6GBPS
- SKU: 861693-K21
- Spare Part Number: 862129-001
- Model Number: MB3000GVYZH
- Assembly Number: 846522-003
- Capacity: 3 TB
- Transfer Rate Synchronous (Max): 6GB/SEC
- Seek Time: 7.45 Ms (Average) / 14.2 Ms (Max)
- Track-to-Track Seek Time: 0.32 Ms
- Spindle Speed: 7200 RPM
- Min Operating Temperature: 50 °F (10°C)
- Max Operating Temperature: 95 °F (35°C)
Dimension and Weight
- Width : 4 Inch
- Depth : 5.8 Inch
- Height : 1 Inch
- Weight : 1.52 LBS
HPE ProLiant DL Series: DL120 Gen9 (3.5 inch), DL120 Gen9 Entry (3.5 inch), DL160 Gen9 (3.5 inch), DL160 Gen9 Base (3.5 inch), DL160 Gen9 Entry (3.5 inch), DL160 Gen9 Performance (3.5 inch), DL20 Gen9 (3.5 inch), DL20 Gen9 Entry (3.5 inch), DL20 Gen9 Performance (3.5 inch), DL360 Gen10 (3.5 inch), DL360 Gen10 Base (3.5 inch), DL360 Gen10 Entry (3.5 inch), DL360 Gen10 High Performance (3.5 inch), DL360 Gen10 Low (3.5 inch), DL360 Gen10 Performance (3.5 inch), DL360 Gen10 Solution (3.5 inch), DL380 Gen10 (3.5 inch), DL380 Gen10 Base (3.5 inch), DL380 Gen10 Entry (3.5 inch), DL380 Gen10 High Performance (3.5 inch), DL380 Gen10 Performance (3.5 inch), DL380 Gen10 Solution (3.5 inch), DL388 Gen9 (3.5 inch), DL388 Gen9 Base (3.5 inch), DL60 Gen9 (3.5 inch), DL60 Gen9 Base (3.5 inch), DL60 Gen9 Entry (3.5 inch), DL80 Gen9 (3.5 inch), DL80 Gen9 Base (3.5 inch), DL80 Gen9 Entry (3.5 inch) Servers
HPE ProLiant ML Series: ML150 Gen9 (3.5 inch), ML150 Gen9 Base (3.5 inch), ML150 Gen9 Entry (3.5 inch), ML150 Gen9 Performance (3.5 inch) Servers
About Refurbished Products
When it comes to storing files and processing information, it is difficult to shove the impressive SATA hard drives aside. Although many people tend to regard hard disk drives as old technology, the new highly-performing variants have raised the bar. One of the most impressive variants is hard drives with the SATA interface and transfer speed of up to 6Gbps.
These are among the best drives to buy presently. They come with flash-speed disks that load several times faster than traditional hard drives. Another added advantage is that they come in either 2.5-inch sizes or 3.5-inch sizes. Users can find SATA 6Gbps hard drives that will nicely fit their case or enclosure.
SATA 6Gbps hard drives are designed to offer maximum performance. They connect to servers, PCs, or desktop computers via SATA 6Gbps cables. Despite their compact 2.5" to 3.5" sizes, they feature a dynamic cache of up to 64MB. Having these types of storage devices in hand will improve work efficiency and productivity.
Improved Storage Capacity and Performance
There are SATA 6Gbps hard drives that can give users a blend of HDD and SSD functionality. A device that can give a synergistic effect on both storage units will surely offer a higher level of performance. Users will find drives with traditional storage capacity up to 22TB. Most of these drives also come along with NAND technology for enhanced performance.
The read-write speed is something that will give users optimum satisfaction. With the SATA 6Gbps interface, users can expect a read speed of up to 400MB/s. Not only that, but some drives also run at up to 10000 rpm. Even at that rate, they are generally quiet, and they generate less heat.
Drives that use the SATA 6Gbps interface have been built to learn users' most used applications effectively. This engineering allows them to load those applications faster. It also helps gaming consoles to load the games initially after users have launched the game. There is everything to get excited about when it comes to these drives.
The point of the SATA 6Gbps interface is to enhance the quality of traditional mechanical hard drives. They are available at different capacity choices and RPM choices.
Reliable Data Recovery
There are possibilities of data accidents such as accidental deletion, formatting, virus attack, unexpected power shutdown, and partition loss. If such losses occur, data recovery software can easily recover the data from SATA 6Gbps hard drives. Data can be easily recovered, undelete, and unformatted from these SATA hard drives
Dynamic CacheThe dynamic cache is one of these drives most impressive features despite not being so evident to users. It improves the performance of the SATA 6Gbps drives in real time with optimized cache allocation. This function allocates more cache towards the read and writes functions. That is why users will find that read and write speeds are usually almost equal.
Here, you can check more available conditions of your desired product 861693-K21 at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.
Other Available Conditions for this Part
Other Available Categories For - Hard Drive - SATA-6GBPS
- 1TB-7.2K RPM
- 250GB-7.2K RPM
- 2TB-7.2K RPM
- 300GB-10K RPM
- 1TB-5.9K RPM
- 3TB-7.2K RPM
- 4TB-7.2K RPM
- 500GB-7.2K RPM
- 1.5TB-5.4K RPM
- 1.5TB-5.9K RPM
- 1.5TB-7.2K RPM
- 160GB-10K RPM
- 160GB-7.2K RPM
- 1TB-10K RPM
- 1TB-5.4K RPM
- 250GB-10K RPM
- 2TB-5.4K RPM
- 2TB-5.9K RPM
- 320GB-7.2K RPM
- 3TB-5.4K RPM
- 3TB-5.9K RPM
- 450GB-10K RPM
- 4TB-5.4K RPM
- 4TB-5.9K RPM
- 500GB-5.4K RPM
- 5TB-5.4K RPM
- 5TB-5.9K RPM
- 5TB-7.2K RPM
- 600GB-10K RPM
- 6TB-5.4K RPM
- 6TB-7.2K RPM
- 750GB-7.2K RPM
- 8TB-7.2K RPM
- 8TB-5.4K RPM
- 6TB-5.9K RPM
- 8TB-5.9K RPM
- 1.2TB-10K RPM
- 10TB-7.2K RPM
- 10TB-5.4K RPM
- 12TB-7.2K RPM
- 14TB-7.2K RPM
- 12TB-5.4K RPM
- 16TB-7.2K RPM
- 14TB-5.4K RPM
- 18TB-7.2K RPM
- 2TB-5.7K RPM
- 20TB-7.2K RPM
- 6TB-5.4K RPM
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.