872285-001 HPE 600GB SAS 10K RPM 12GBPS internal Hard Disk Bulk

Certainly, here is an explanation of the Design and Form Factor section:

Design and Form Factor refers to the physical appearance and characteristics of the HPE 872285-001 SAS hard drive. This section covers various aspects of the drive's design, including its size and dimensions, construction materials, and build quality. It also discusses whether the drive is hot-swappable, meaning it can be removed or inserted into a server while the system is still running, or whether it requires downtime for installation or replacement.

Size and dimensions are essential factors to consider when installing or replacing hard drives in a server or storage system. The HPE 872285-001 SAS hard drive is a standard 2.5-inch form factor drive, which is smaller than a typical 3.5-inch desktop hard drive. Knowing the dimensions of the drive can help ensure that it will fit into the appropriate bay or slot in your server or storage system.

The construction materials of the drive can also impact its durability and reliability. The HPE 872285-001 SAS hard drive is built to enterprise-grade standards, meaning it uses high-quality components designed for use in mission-critical environments. These drives typically have better cooling and vibration dampening features than consumer-grade drives, which can help extend their lifespan.

Finally, the hot-swappable design of the HPE 872285-001 SAS hard drive means that it can be replaced or inserted into a running server or storage system without the need for downtime. This can be a significant advantage for organizations that require high levels of uptime and availability for their data.

Sure, here is an explanation of the Performance and Speed section:

The Performance and Speed section of the HPE 872285-001 SAS hard drive covers various aspects related to the speed and performance of the drive. These include rotational speed, data transfer rate, cache size, average latency, and seek time.

Rotational speed is the speed at which the drive's platters spin, and it's measured in revolutions per minute (RPM). The HPE 872285-001 SAS hard drive has a rotational speed of 10,000 RPM, which is faster than most consumer-grade hard drives. The higher the RPM, the faster the drive can access and transfer data.

Data transfer rate is the rate at which data can be read from or written to the drive. The HPE 872285-001 SAS hard drive has a maximum data transfer rate of 12 Gbps, which is the maximum speed supported by the SAS interface. This is significantly faster than the older SATA interface, which has a maximum transfer rate of 6 Gbps.

Cache size refers to the amount of on-board memory that the drive uses to temporarily store frequently accessed data. The HPE 872285-001 SAS hard drive has a 128 MB cache, which is larger than the cache size of many consumer-grade hard drives. A larger cache can help improve performance by reducing the amount of time the drive needs to access frequently used data.

Average latency is the average time it takes for the drive to rotate its platters and position its read/write head over the correct location on the disk. The HPE 872285-001 SAS hard drive has an average latency of 2.9 ms, which is faster than many consumer-grade hard drives. A lower latency can help improve performance by reducing the amount of time the drive needs to access data.

Seek time refers to the time it takes for the drive to position its read/write head over a specific location on the disk. The HPE 872285-001 SAS hard drive has an average seek time of 4.6 ms, which is faster than many consumer-grade hard drives. A faster seek time can help improve performance by reducing the amount of time the drive needs to access data.

Certainly, here is an explanation of the Reliability and Durability section:

The Reliability and Durability section of the HPE 872285-001 SAS hard drive covers various aspects related to the reliability and durability of the drive. These include Mean Time Between Failures (MTBF), error correction, S.M.A.R.T. monitoring, temperature and vibration tolerance, and warranty information.

MTBF is a measure of how long a drive is expected to last before it fails. The HPE 872285-001 SAS hard drive has a MTBF of 2.5 million hours, which is higher than many consumer-grade hard drives. This means that the drive is designed to be highly reliable and durable, even when used in mission-critical applications.

Error correction refers to the drive's ability to detect and correct data errors. The HPE 872285-001 SAS hard drive uses various error correction technologies, including cyclic redundancy check (CRC) and error correction code (ECC), to ensure data integrity. These technologies help to detect and correct errors that can occur during data transmission or storage.

S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) is a monitoring system that is built into the drive's firmware. It allows the drive to monitor its own health and provide alerts if it detects potential problems. The HPE 872285-001 SAS hard drive supports S.M.A.R.T. monitoring, which can help to detect issues before they become serious problems.

Temperature and vibration tolerance are important factors to consider when selecting a hard drive. The HPE 872285-001 SAS hard drive is designed to operate within a temperature range of 50°F to 95°F (10°C to 35°C) and can tolerate vibration levels of up to 2.17 Grms. These specifications make the drive suitable for use in a wide range of environments.

Finally, the HPE 872285-001 SAS hard drive comes with a limited warranty from Hewlett Packard Enterprise, which covers the drive against defects in materials and workmanship. The warranty period may vary depending on the region and the specific product, so it's important to check the warranty details before making a purchase.

General Information

• Manufacturer :HPE
• MPN: 872285-001
• Device Type : Hard Drive (HDD)
• Sub-Type : SAS-12GBPS
• SKU: 872285-001

Technical Information

• Capacity : 600 GB
• Form Factor : 2.5 SFF
• Interface : SAS 12GB/S
• Data Transfer Rate : 1.2 GBPS
• Spindle Speed : 10000 RPM
• Features : Dual Port

Performance

• Drive Transfer Rate : 1.2 GBPS (External)
• Spindle Speed : 10000 RPM
• Expansion & Connectivity
• Interfaces : 1 X SAS 12 GB/S
• Compatible Bays : 2.5 SFF

Compatibility

• Modular Smart Array 1040 Dual Controller SFF Bundle, 1040 Dual Controller SFF Storage, 2040 10GB ISCSI Dual Controller SFF Bundle, 2040 Dual Controller SFF Bundle, 2040 Fc Dual Controller SFF Bundle, 2040 SAN Dual Controller SFF Bundle, 2040 SAN Dual Controller SFF Storage, 2040 SAN W/O SFP SFF Bundle, 2040 SAS Dual Controller SFF Bundle, 2040 SAS Dual Controller SFF Storage, 2040 SFF Chassis, 2040 SFF Dc-power Chassis, 2042 San Dual Controller SFF Storage, 2042 SAN Dual Controller With Mainstream Endurance Solid State Drives SFF Storage, 2042 SAS Dual Controller SFF Storage, 2042 SAS Dual Controller With Mainstream Endurance Solid State Drives SFF Storage.