Western Digital 0B34793 1.92TB SAS-12GBPS Solid State Drive Refurbished

In the realm of data storage solutions, solid-state drives (SSDs) have emerged as a prominent choice for their speed, reliability, and efficiency. Among the array of SSD options available, the Western Digital 0B34793 1.92TB SAS-12GBPS SSD stands out for its read-intensive capabilities and utilization of NAND flash MLC technology. This comprehensive guide aims to delve into the intricacies of this SSD, shedding light on its features, functionality, and benefits.

The Western Digital 0B34793 1.92TB SAS-12GBPS SSD is a storage device manufactured by Western Digital, a leading provider of data storage solutions. It belongs to the category of solid-state drives, which utilize flash memory for data storage instead of traditional spinning disks found in hard disk drives (HDDs). This particular SSD is designed for read-intensive workloads, making it suitable for applications where rapid access to stored data is crucial.

• Storage Capacity: The SSD offers a storage capacity of 1.92 Terabytes (TB), providing ample space for storing large volumes of data.
• SAS Interface: It utilizes a Serial Attached SCSI (SAS) interface, enabling high-speed data transfer of up to 12 gigabits per second (GBPS). This makes it suitable for enterprise-level applications that demand swift data access and processing.
• NAND Flash Technology: The SSD employs Multi-Level Cell (MLC) NAND flash memory, a type of non-volatile storage technology known for its balance between performance, endurance, and cost-effectiveness.
• Read-Intensive Design: Tailored for read-intensive workloads, the SSD excels in applications where the majority of operations involve reading data rather than writing.

NAND flash memory serves as the storage medium within SSDs, and the type of NAND technology utilized greatly influences the performance and durability of the drive. Multi-level cell (MLC) NAND is a common type of flash memory known for its ability to store multiple bits of data per cell, hence the term "multi-level." This allows MLC SSDs to achieve higher storage densities compared to Single-Level Cell (SLC) NAND while maintaining a relatively lower cost per gigabyte.

MLC NAND works by varying the electrical charge within memory cells to represent different states, each corresponding to a specific binary value. This enables the storage of multiple bits (typically two or three) within a single cell, hence the term "multi-level." While this increases storage density and reduces cost, it also introduces complexities in managing data reliability and endurance.

• High Read Performance: The SSD's design prioritizes read operations, resulting in fast and efficient data retrieval. This is particularly beneficial for applications such as content delivery networks (CDNs), databases, and virtual desktop infrastructure (VDI) where rapid access to stored data is critical for performance.
• Enhanced Endurance: Despite being optimized for read-intensive workloads, the SSD's utilization of MLC NAND flash technology ensures robust endurance, allowing it to withstand a high number of read cycles over its lifespan. This makes it suitable for continuous operation in demanding environments without compromising reliability.
• Cost-Effective Storage Solution: By leveraging MLC NAND flash memory, the Western Digital 0B34793 SSD strikes a balance between performance and cost-effectiveness. Organizations can benefit from the high storage capacity offered by the SSD without incurring exorbitant expenses, making it a viable solution for budget-conscious deployments.
• Enterprise-Grade Reliability: Western Digital is renowned for producing storage solutions renowned for their reliability and durability. The 0B34793 SSD undergoes rigorous testing and quality assurance measures to ensure consistent performance and longevity, making it suitable for enterprise-level deployments where downtime is not an option.

The Western Digital 0B34793 1.92TB SAS-12GBPS SSD finds application across various industries and scenarios where read-intensive storage solutions are required. Some prominent use cases include:

• Big Data Analytics: In big data environments where vast amounts of data need to be processed and analyzed, the high read performance of the SSD facilitates rapid data retrieval, enabling faster insights and decision-making.
• Content Delivery Networks (CDNs): CDNs rely on efficient content caching and delivery to ensure seamless user experiences. The Western Digital SSD accelerates content delivery by swiftly accessing cached data, reducing latency, and enhancing overall performance.
• Database Servers: Database servers handling read-heavy workloads benefit from the SSD's quick data retrieval capabilities, resulting in improved query response times and enhanced system responsiveness.
• Virtual Desktop Infrastructure (VDI): VDI environments require fast access to user data and applications to deliver a seamless desktop experience. The SSD accelerates boot times, application launches, and data access within virtual desktop sessions, optimizing productivity for end-users.

When looking for a 1.92TB SAS-12Gbps SSD, there are several popular brands and models available in the market. Each brand and model may have different features and specifications, and it's important to compare them to find the best option for your needs. Some of the popular brands and models of 1.92TB SAS-12Gbps SSDs include:

• Seagate Nytro 3330: This SSD is designed for data center and enterprise environments and it offers high performance and endurance. It features data protection technologies such as RAIN (Redundant Array of Independent NAND) and Power Loss Protection. It also has a low power consumption and an MTBF of 2.5 million hours.
• Samsung PM883: This SSD is designed for data center and enterprise environments, it is designed to handle mixed read-write workloads and high-performance applications. It features data protection technologies such as ECC (Error Correction Code) and Power Loss Protection. It also has a low power consumption and an MTBF of 2 million hours.
• Western Digital Ultrastar DC SS530: This SSD is designed for data center and enterprise environments and it offers high performance and endurance. It features data protection technologies such as RAIN (Redundant Array of Independent NAND) and Power Loss Protection. It also has a low power consumption and an MTBF of 2.5 million hours.
• Toshiba PX04S: This SSD is designed for data center and enterprise environments, it is designed to handle mixed read-write workloads and high-performance applications. It features data protection technologies such as ECC (Error Correction Code) and Power Loss Protection. It also has a low power consumption and an MTBF of 2 million hours.

• Power consumption: Power consumption refers to the amount of power the drive requires to operate. A 1.92TB SAS-12Gbps SSD will typically have low power consumption, which is measured in watts (W). The exact power consumption will depend on the manufacturer and the specific model of the SSD. This is an important factor to consider, especially for servers, where power consumption can be a major factor affecting the overall cost of ownership.
• Compatibility: The 1.92TB SAS-12Gbps SSD is compatible with servers and other devices that have an SAS 12Gbps controller and the necessary cables and connectors. To take advantage of the full performance of the drive, the host computer or server should have a SAS 12Gbps controller and the cables and connectors should also be SAS 12Gbps. It is important to make sure that the controller, cables, and connectors are compatible with the SSD, otherwise, the drive may not perform as expected or may not work at all.

• Form factor: The form factor refers to the physical size and shape of the drive. A 2.5-inch form factor is common for SSDs, as it allows them to be easily installed on a variety of devices, such as laptops and servers.
• NAND flash type: NAND flash memory is the type of memory used in SSDs. There are two main types of NAND flash memory: MLC (Multi-Level Cell) and TLC (Triple-Level Cell). MLC flash memory can store two or more bits per cell, while TLC flash memory can store three or more bits per cell. MLC flash memory is generally considered to be more reliable and has longer endurance than TLC flash memory.
• Sequential read/write speed: Sequential read and write speeds refer to the speed at which data can be transferred to or from the drive sequentially (i.e., reading or writing large blocks of data at a time). A 1.92TB SAS-12Gbps SSD will typically have a sequential read speed of up to 1200MB/s and a sequential write speed of up to 1100MB/s.
• Random read/write speed (IOPS): Random read and write speeds refer to the speed at which data can be transferred to or from the drive randomly (i.e., reading or writing small blocks of data at a time). A 1.92TB SAS-12Gbps SSD will typically have a random read speed (IOPS) of up to 200,000 and a random write speed (IOPS) of up to 190,000.
• Endurance: Endurance refers to the total amount of data that can be written to the drive over its lifetime. This is usually measured in terabytes written (TBW). The endurance of a 1.92TB SAS-12Gbps SSD will depend on the manufacturer and the NAND flash type used.
• Power consumption: Power consumption refers to the amount of power the drive requires to operate. A 1.92TB SAS-12Gbps SSD will typically have low power consumption.
• MTBF: MTBF (Mean Time Between Failures) is a measure of a drive's reliability. It is typically measured in hours. The MTBF of a 1.92TB SAS-12Gbps SSD will depend on the manufacturer.
• Data protection: Many SSDs come with data protection features, such as ECC (Error Correction Code) and RAIN (Redundant Array of Independent NAND). These features help to prevent data loss in case of errors or NAND failures.

• 4kb Random Read: Up To 130,000 Iops
• 4kb Random Write: Up To 30,000 Iops
• Sequential Read (64k): Up To 1100 Mbps
• Sequential Write (64k): Up To 700 Mbps

Outline, The Western Digital 0B34793 1.92TB SAS-12GBPS SSD represents a compelling storage solution for read-intensive applications, combining high performance, durability, and cost-effectiveness. By leveraging NAND flash MLC technology and a SAS interface, it delivers rapid data access, enhanced endurance, and enterprise-grade reliability. Whether deployed in big data analytics, content delivery networks, database servers, or virtual desktop infrastructure, this SSD excels in scenarios where quick access to stored data is paramount. As organizations continue to prioritize efficiency and performance in their storage infrastructure, the Western Digital 0B34793 SSD emerges as a versatile and dependable choice for meeting their evolving needs.