Description
Installation and Configuration
The HPE Flexfabric 20GB 2-Port 20 Gigabit LAN Adapter, also known as the 701528-001, is a high-speed network adapter designed for use in servers and other high-performance computing systems. It is designed to provide a high level of performance and reliability, making it ideal for use in data centers and other demanding environments.
To install the HPE Flexfabric 20GB 2-Port 20 Gigabit LAN Adapter, you will need to first ensure that your server or other computing system is compatible with the adapter. Once compatibility has been confirmed, you will need to physically install the adapter into your system. This typically involves opening up the server or other system and inserting the adapter into an available PCI Express slot.
Once the adapter has been physically installed, you will need to configure it for use. This typically involves installing the necessary drivers and software for the adapter on your system. Depending on the operating system and other software that you are using, this may involve downloading and installing software from the HPE website or other sources.
Once the drivers and software have been installed, you will need to configure the adapter for use. This typically involves setting up the adapter’s network settings, such as its IP address and other network parameters. You may also need to configure the adapter for use with specific applications or services, such as virtualization or storage systems.
Support and Warranty
The 701528-001 HPE Flexfabric 20GB 2-Port 20 Gigabit LAN Adapter is a high-speed network adapter designed for use with HPE servers. It provides 20 Gigabit LAN connectivity for increased network bandwidth and improved performance.
Support for this adapter includes access to HPE’s online technical support resources, as well as hardware replacement options in the event of a hardware failure. Additionally, HPE offers a limited warranty for this adapter, which covers defects in materials and workmanship for a specified period of time. This warranty is transferable to subsequent owners and can be extended through HPE’s Care Pack services.
Technical Specs
The HPE Flexfabric 20GB 2-Port 20 Gigabit LAN Adapter, with part number 701528-001, is a network adapter designed for use in HPE ProLiant servers. It provides 20 Gbps of bandwidth and supports both Fibre Channel over Ethernet (FCoE) and iSCSI protocols.
Here are some of the key technical specs of this adapter:
- Form factor: The adapter is a low-profile, half-height PCIe card that can be installed in a server’s expansion slot.
- Connectors: It has two 20 Gbps SFP+ (small form-factor pluggable) connectors that can be used to connect to Fibre Channel or Ethernet switches.
- Data rate: The adapter supports 20 Gbps full-duplex data rate for both FCoE and iSCSI traffic.
- Protocols: It supports both FCoE and iSCSI protocols, allowing for efficient and cost-effective data center network consolidation.
- OS support: The adapter is compatible with a wide range of operating systems, including Windows Server, Linux, and VMware ESXi.
- Management: The adapter can be managed using the HPE FlexFabric Adapter Software, which allows for monitoring, configuration, and troubleshooting of the adapter.
- Compatibility: The adapter is compatible with a wide range of HPE ProLiant servers, including DL, ML, and SL series servers.
Detail Description
Manufacturer: HPE
MPN: 701528-001
Type: Networking
Network Adapter-Type: 2 Ports
SKU: 701528-001
Networking:
Ports : 20 Gigabit Ethernet X 2
Connectivity Technology : Wired
Data Link Protocol : Fcoe, 20 Gigabit LAN
Data Transfer Rate : 20 GBPS
Network / Transport Protocol : TCP/IP, Udp/Ip
Remote Management Protocol : SNMP
Features : Full Duplex Capability, Tcp/Ip Offloading, Quality Of Service (Qos), Jumbo Frames Support, Teaming Support, Pxe Support, Large Send Offload (Lso), Receive Side Scaling (Rss), Single Root I/O Virtualization (Sr-Iov), Tcp Segmentation Offload (Tso), Checksum Offload Support, Extended Message-Signaled Interrupts (Msi-X), Udp/Ip Offloading
Compliant Standards : IEEE 802.3, IEEE 802.3u, IEEE 802.1q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (Lacp), IEEE 802.3ae, IEEE 802.3p, IEEE 802.3ap
Dimensions & Weight
Width: 2.18 inch
Depth : 20.37 inch
Height : 7.11 inch
Weight : 10.50 lbs
Compatibility Information
Proliant Bl460c Gen8, Bl465c Gen8, Bl660c Gen8, Bl660c Gen8 Entry, Bl660c Gen8 Performance
