Description
Product overview of Adaptec 2274200-R 7805 PCI-E RAID Controller
The Adaptec 2274200-R 7805 is a RAID controller that allows you to connect SAS or SATA hard drives to your computer system. It is a PCIe 3.0 x8 card, which means it can be installed in any PCIe slot on your motherboard that supports the PCIe 3.0 standard. The card supports up to 1GB of DDR3 cache memory, which allows for faster data access and transfer speeds. With the Adaptec 2274200-R 7805, you can configure your hard drives into a RAID array, which provides data redundancy and performance improvements.
RAID Technology Overview
RAID (Redundant Array of Independent Disks) is a technology that allows you to combine multiple hard drives into a single logical unit. There are several different RAID configurations, each with its own advantages and disadvantages. The most commonly used RAID configurations are RAID 0, RAID 1, RAID 5, and RAID 6.
RAID 0 combines two or more hard drives into a single logical drive that provides improved performance but no redundancy. RAID 1, on the other hand, mirrors two hard drives, providing redundancy but no performance improvement. RAID 5 uses three or more hard drives and provides both performance improvements and data redundancy. RAID 6 is similar to RAID 5, but with an additional parity block, providing improved fault tolerance.
Adaptec 2274200-R 7805 Features
The Adaptec 2274200-R 7805 RAID controller supports RAID levels 0, 1, 1E, 5, 6, 10, 50, and 60. This means you can configure your hard drives in a variety of ways depending on your needs. The card also supports SAS and SATA hard drives with transfer speeds of up to 6Gbps.
The Adaptec 2274200-R 7805 also features a built-in DDR3 cache memory of up to 1GB. This allows for faster data access and transfer speeds. The card also supports Adaptec’s maxCache 3.0 caching software, which provides even faster performance by caching frequently accessed data in the card’s cache memory.
The Adaptec 2274200-R 7805 is a PCIe 3.0 x8 card, which means it can be installed in any PCIe slot on your motherboard that supports the PCIe 3.0 standard. The card also supports hot-swappable hard drives, which means you can replace a failed drive without shutting down your system.
Compatibility
The Adaptec 2274200-R 7805 is compatible with a variety of operating systems, including Windows, Linux, and VMware ESXi. The card also supports a wide range of motherboards and system configurations.
Installation
Installing the Adaptec 2274200-R 7805 is a simple process. First, you need to locate an available PCIe slot on your motherboard and remove the corresponding slot cover. Next, insert the card into the slot and secure it with a screw. Finally, connect your SAS or SATA hard drives to the card using the included cables.
In Summary, The Adaptec 2274200-R 7805 is a powerful RAID controller that provides data redundancy and improved performance for your hard drives. With support for SAS and SATA hard drives, transfer speeds of up to 6Gbps, and a built-in DDR3 cache memory of up to 1GB, this card is an excellent choice for anyone looking to improve the performance and reliability of their storage system.
General Information about this Adaptec 2274200-R
- Manufacturer: Adaptec
- Part Number or SKU# 2274200-R
- Product Type : Controller
- Product Name : SAS-SATA
Technical Specifications
- Controller Interfaces Type: Serial Attached Scsi (sas)
- Host Interface: Pci Express 3.0 X8
- Data Transfer Rate: 768 Mbps
- Raid Supported: Yes
- Raid Levels: 0 . 1 . 1e . 5 . 6 . 10 . 50 . 60 .
- Drive Supported: 256 X Physical
- Platform Supported: Pc
- Standard Memory: 1gb
- Ports: 2 X Sff-8643 6gb/s Sas – Serial Attached Scsi (sas) Internal
- Form Factor: Low-profile Plug-in Card
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
