CBS350-8T-E-2G Cisco 8 Ports Managed Switch Factory Sealed New

Advanced Network Management

The CBS350-8T-E-2G Cisco 8 Ports Managed Switch offers advanced network management features that provide network administrators with greater control over their networks. Here are some of the advanced network management features of the switch:

• VLANs: The switch supports up to 4096 VLANs, allowing network administrators to logically separate different parts of the network for security or organizational purposes.
• Quality of Service (QoS): The switch supports advanced QoS features such as traffic prioritization, which allows network administrators to prioritize traffic for specific applications or users, ensuring that critical applications receive sufficient bandwidth and minimizing network congestion.
• Link Aggregation Control Protocol (LACP): The switch supports LACP, allowing for the creation of link aggregation groups (LAGs) to increase bandwidth and provide redundancy. This feature also provides load balancing and failover capabilities.
• Access Control Lists (ACLs): The switch supports ACLs, which enable network administrators to control traffic flow based on IP addresses, MAC addresses, VLANs, and other criteria.
• Spanning Tree Protocol (STP): The switch supports STP, which helps prevent network loops and ensures network stability by disabling redundant links.
• Rapid Spanning Tree Protocol (RSTP): The switch supports RSTP, which provides faster convergence times than STP, allowing for faster network recovery in the event of a link failure.
• Simple Network Management Protocol (SNMP): The switch supports SNMP, allowing for remote management and monitoring of the network.
• Cisco FindIT Network Manager: The switch can be easily managed using Cisco FindIT Network Manager, a web-based management tool that provides network administrators with an intuitive interface for configuration, monitoring, and troubleshooting.

Routing and Switching Protocols

The CBS350-8T-E-2G Cisco 8 Ports Managed Switch is a Layer 2 switch, which means it primarily operates at the data link layer of the OSI model. However, it also supports some Layer 3 routing features. The switch supports the following routing and switching protocols:

• Static routing: The switch supports static routing, which allows you to manually configure the routing table with static routes. Static routing is useful for networks with a simple topology.
• RIP v1/v2: The switch supports Routing Information Protocol (RIP) version 1 and version 2, which are distance-vector routing protocols that use hop count as a metric to determine the best path for forwarding packets.
• DHCP snooping: The switch supports Dynamic Host Configuration Protocol (DHCP) snooping, which helps prevent rogue DHCP servers from distributing incorrect IP addresses and other network information.
• IGMP snooping: The switch supports Internet Group Management Protocol (IGMP) snooping, which allows the switch to forward multicast traffic only to ports that have requested it, reducing network traffic and improving network performance.
• Link Layer Discovery Protocol (LLDP): The switch supports LLDP, which is a vendor-neutral protocol that allows network devices to advertise their identity, capabilities, and neighbors on the network.
• Spanning Tree Protocol (STP): The switch supports STP, which is a Layer 2 protocol that prevents network loops by disabling redundant links in the network, ensuring that there is only one active path between any two network nodes.
• VLAN Trunking Protocol (VTP): The switch supports VTP, which allows you to manage VLAN configurations across multiple switches in your network.

Remote Management and Monitoring

The CBS350-8T-E-2G Cisco 8 Ports Managed Switch supports remote management and monitoring, which allows network administrators to manage the switch from a remote location. Here are some of the remote management and monitoring features of the switch:

• Web-based management: The switch can be managed using a web-based interface, which can be accessed from any device with a web browser. This allows network administrators to manage the switch from anywhere with an internet connection.
• Command-line interface (CLI): The switch supports a CLI, which provides network administrators with a command-line interface for configuring and managing the switch remotely.
• Simple Network Management Protocol (SNMP): The switch supports SNMP, which allows network administrators to monitor and manage the switch remotely using network management software.
• Remote firmware upgrades: The switch can be upgraded remotely using TFTP or SNMP, allowing network administrators to upgrade the firmware without physically accessing the switch.
• Remote logging: The switch can be configured to send system logs and events to a remote syslog server, allowing network administrators to monitor the switch remotely.
• Port mirroring: The switch supports port mirroring, which allows network administrators to mirror the traffic of one or more ports to another port or a remote device for analysis and troubleshooting.
• Remote access control: The switch supports remote access control using RADIUS and TACACS+, allowing network administrators to control access to the switch from remote locations.

Key Feature about this Cisco CBS350-8T-E-2G

• Manufacturer Cisco
• Model Number or SKU# CBS350-8T-E-2G
• Product Series 350
• Product Type Ethernet Switch

Interfaces/Ports of Cisco 8 Ports Switch

• Total Number of Network Ports 10
• Uplink Port Yes
• Modular Yes
• Port/Expansion Slot Details 2 x Gigabit Ethernet TP/SFP Combo
• Port/Expansion Slot Details 8 x Gigabit Ethernet PoE+

Media & Performance of Cisco 350 Series Switch

• Media Type Supported Twisted Pair
• Media Type Supported Optical Fiber
• Ethernet Technology Gigabit Ethernet
• Network Technology 1000Base-T
• Network Technology 1000Base-X

I/O Expansions of Cisco Ethernet Switch

• Number of Total Expansion Slots 2
• Expansion Slot Type SFP (mini-GBIC)
• Shared SFP Slot Yes
• Number of SFP Slots 2

Network & Communication

• Layer Supported 2

Management & Protocols

• Manageable Yes

Power Description

• Power Source AC Adapter
• Power Consumption 12.55 W

Dimension and Weight

• Height 1.7 Inch
• Width 10.6 Inch
• Depth 7.3 Inch
• Weight (Approximate) 3.75 lbs

Miscellaneous

• Package Contents-
• 350 CBS350-8T-E-2G Ethernet Switch
• Power Cord
• Power Adapter
• Mounting Kit
• Quick Start Guide
• Environmentally Friendly Yes
• Environmental Certification WEEE