Description
Introduction to the Service Router
The ASR5K-042GE-LX-K9 Cisco ASR 5000 Rev2 4 Port SEP Expansion Module is a network module that can be used to expand the number of Ethernet ports on a Cisco ASR 5000 Series Router.
The module provides 4 Gigabit Ethernet ports that can be used to connect to other network devices, such as switches, routers, or servers. The ports are designed to support both copper and fiber connections, providing a flexible and scalable solution for network expansion.
The ASR5K-042GE-LX-K9 module is designed to be used with the Cisco ASR 5000 Series Router, which is a high-performance, carrier-grade router that can be used to support a wide range of network services, such as routing, VPN, security, and QoS. The module is hot-swappable and can be easily added to the router without disrupting the network.
The module supports various features such as Quality of Service (QoS), Resilient Ethernet Protocol (REP), Link Aggregation Control Protocol (LACP), Link Layer Discovery Protocol (LLDP) and many more.
The ASR5K-042GE-LX-K9 module provides an efficient, cost-effective solution for expanding the number of Ethernet ports on a Cisco ASR 5000 Series Router, and is a great choice for organizations that need to expand their network infrastructure or support high-bandwidth applications.
Remote Management and Monitoring
The ASR5K-042GE-LX-K9 Cisco ASR 5000 Rev2 4 Port SEP Expansion Module can be remotely managed and monitored through a variety of methods. One of the main methods is through the use of Cisco’s Network Services Orchestrator (NSO) software. This software allows for the automation of network management tasks, including the configuration, monitoring, and troubleshooting of network devices.
The module can also be managed and monitored through the Cisco ASR 5000 Series Router Command-Line Interface (CLI). This allows network administrators to access the device remotely and configure it using a command-line interface. The CLI also allows administrators to view the status of the module and troubleshoot any issues that may arise.
Additionally, the module can also be managed and monitored through the use of Simple Network Management Protocol (SNMP) commands. SNMP is a widely used protocol for managing and monitoring network devices, and it allows administrators to monitor the status of the module and receive notifications of any issues that may arise.
The module also allows for the use of Remote Monitoring (RMON) and syslog for monitoring and troubleshooting of the devices.
Establishing Internet Connectivity
Establishing internet connectivity for the ASR5K-042GE-LX-K9 Cisco ASR 5000 Rev2 4 Port SEP Expansion Module involves configuring the device with the appropriate Internet Protocol (IP) address and routing information. The specific steps for establishing internet connectivity will depend on the existing network infrastructure and the desired connectivity configuration.
Generally, the following steps can be taken to establish internet connectivity for the module:
- Assign an IP address to the module. This can be done through the Cisco ASR 5000 Series Router Command-Line Interface (CLI) using the “interface” command.
- Configure the default gateway for the module. This is the IP address of the router that the module will use to send and receive internet traffic. This can also be done through the CLI using the “ip route” command.
- Configure routing protocols such as Border Gateway Protocol (BGP) or Open Shortest Path First (OSPF) if required to advertise the IP addresses to external networks.
- Configure Quality of Service (QoS) policies if necessary to prioritize internet traffic and ensure that critical applications have adequate bandwidth.
- Verify internet connectivity by testing access to external websites or services.
General Information
- Manufacturer Cisco
- Manufacturer Part Number : ASR5K-042GE-LX-K9
- Product Type: Aggregation Service Router
Networking
- Cabling Type : Ethernet 1000Base-LX
- Connectivity Technology : Wired
- Data Link Protocol : Gigabit Ethernet
Features
- Cisco ASR 5000 QGLC Rev2 4-Port Ethernet 1000 Card w/LX SM Long Haul SFP.





