Description
Compatibility with other Cisco Networking Products
The C1861E-UC-4FXO-K9 Cisco 1861 2 Ports 10/100 Wired Router is a compact, high-performance routing platform that is designed to work seamlessly with other Cisco networking products. Some of the ways in which it can be integrated with other Cisco networking products include:
- Cisco Unified Communications Manager (CUCM): The C1861E-UC-4FXO-K9 can be integrated with CUCM to provide voice and video services over the IP network. This allows businesses to combine voice, video, and data traffic on a single network, reducing costs and improving network efficiency.
- Cisco Identity Services Engine (ISE): The C1861E-UC-4FXO-K9 can be integrated with ISE to provide network access control and security services. ISE can be used to authenticate and authorize users and devices, as well as to enforce security policies on the network.
- Cisco Meraki: The C1861E-UC-4FXO-K9 can be integrated with Cisco Meraki to provide cloud-managed networking services. Meraki provides a range of features such as wireless networking, security, and network management, which can be easily managed and configured through a cloud-based portal.
- Cisco SD-WAN: The C1861E-UC-4FXO-K9 can be integrated with Cisco SD-WAN to provide software-defined wide area networking services. SD-WAN allows businesses to optimize and automate their WAN connections, improving network performance and reducing costs.
Calability and Upgrade Options
The C1861E-UC-4FXO-K9 Cisco 1861 2 Ports 10/100 Wired Router is a legacy router that is no longer being produced and supported by Cisco. Therefore, it may not have the same level of scalability and upgrade options as newer router models.
Scalability:
- The C1861E-UC-4FXO-K9 router has a limited number of ports and is designed for small to medium-sized businesses.
- It has 2 10/100 Ethernet ports and 4 FXO ports for connecting to analog telephone lines, which may not be sufficient for larger network deployments.
- It also has limited memory and processing power, which may limit its ability to handle large amounts of traffic.
Upgrade options:
- As this router is no longer being produced and supported by Cisco, there may be limited upgrade options available.
- Software updates and security patches may no longer be available for this router.
- It may not be compatible with newer technologies and features that are available on newer router models.
It is important to note that the C1861E-UC-4FXO-K9 router is a legacy model and may not have the same level of scalability and upgrade options as newer router models. If you are looking for a more scalable and upgradeable router, it is recommended to consider newer models from Cisco or other vendors that are designed for modern networks.
Setting Up and Configuring the C1861E-UC-4FXO-K9
Setting up and configuring the C1861E-UC-4FXO-K9 Cisco 1861 2 Ports 10/100 Wired Router involves several steps, including:
Hardware setup
- Unpack the router and connect the power cord to an electrical outlet.
- Connect the router to a computer or laptop using the console cable.
- Connect the router’s Ethernet ports to your LAN devices.
Configuring basic settings
- Open a terminal emulation software (such as Putty) and configure the serial connection settings to match the router’s console port settings (baud rate: 9600, data bits: 8, parity: none, stop bits: 1, flow control: none).
- Press the Enter key to access the router’s command-line interface (CLI).
- Use the “enable” command to enter privileged mode, and then set a new password for the “enable” mode using the “configure terminal” command.
- Use the “hostname” command to set a new hostname for the router.
- Use the “interface” command to configure the router’s LAN interfaces.
- Use the “ip address” command to assign IP addresses to the router’s interfaces.
Configuring routing
- Use the “ip routing” command to enable IP routing on the router.
- Use the “ip route” command to configure static routes on the router.
- Use the “router eigrp” command to configure EIGRP routing on the router.
Configuring security
- Use the “access-list” command to configure access control lists on the router.
- Use the “crypto key generate rsa” command to generate an RSA key pair for the router.
- Use the “line vty” command to configure the router’s virtual terminal interfaces.
Saving the configuration
- Use the “copy running-config startup-config” command to save the current configuration to the router’s non-volatile memory (NVRAM).
Once the router is set up and configured, you can use the “show” commands to verify the router’s configuration and troubleshoot any issues. It’s also recommended to regularly back up your configurations to avoid losing any important information in case of a failure.
General Information
- Manufacturer Cisco Systems, Inc
- Manufacturer Part Number : C1861E-UC-4FXO-K9
- Brand Name: Cisco
IP Telephony
- VoIP :Yes
- VoIP Functionality :VoIP gateway
- Voice Codecs :G.711, G.729
- Telephony Interfaces :4 phone (FXS), 4 line (FXO)
Expansion Slots
- Expansion Slots :1 (total) / 1 (free) x HWIC
Interface Provided
- Interfaces :Audio: 1 x mini-phone 3.5 mm, Management: 1 x console, WAN: 1 x 10Base-T/100Base-TX – RJ-45, Phone line: 4 x FXO – RJ-11, Phone line: 4 x FXS – RJ-11, LAN: 8 x 10Base-T/100Base-TX – RJ-45
Features
