Description
Understanding the Interoperability of Transceiver Module
The GLC-FE-100BX-D is a Cisco Small Form-Factor Pluggable (SFP) transceiver module that provides fast Ethernet connectivity over single-mode fiber optic cables. This transceiver module is designed to be interoperable with other networking equipment that is compliant with the SFP Multi-Sourcing Agreement (MSA). The MSA defines a standard for the mechanical, electrical, and optical interface for SFP modules, ensuring that different modules from different vendors can be used interchangeably in networking equipment that adheres to the MSA.
The GLC-FE-100BX-D supports 100BASE-FX data rates up to 100 Mbps and is capable of transmitting data over distances up to 10 km on single-mode fiber optic cables. The transceiver module operates in the 1310 nm wavelength range and supports a maximum input optical power of -12 dBm. The module also features a digital optical monitoring (DOM) interface that provides real-time monitoring of temperature, voltage, and laser bias current.
The GLC-FE-100BX-D is compatible with a wide range of Cisco networking equipment, including routers, switches, and firewalls, providing a cost-effective solution for extending the reach of fast Ethernet networks. With its SFP form factor and compliance with the SFP MSA, the GLC-FE-100BX-D is a versatile transceiver module that can be used in a wide range of networking applications, providing flexible and reliable fiber optic connectivity.
Enhances Network Performance
The GLC-FE-100BX-D Cisco SFP (Small Form-Factor Pluggable) Transceiver Module is a type of Mini-GBIC (Gigabit Interface Converter) that enhances network performance by increasing data transfer rates, providing greater bandwidth and reducing network downtime. This transceiver module is designed to meet the demands of today’s high-speed data networks.
The GLC-FE-100BX-D is capable of transmitting data at 100 Mbps using fiber-optic cabling. The module supports both single-mode and multimode fiber cabling and is compatible with a range of Cisco switches, routers, and other networking equipment.
One of the key features of the GLC-FE-100BX-D is its ability to extend the reach of data networks, allowing for longer distances between networking devices. This is possible due to the high-speed and reliable performance of fiber-optic cabling, which is less susceptible to signal loss and interference compared to traditional copper cabling.
In addition, the GLC-FE-100BX-D is designed to be highly reliable, reducing the risk of network downtime. The module is designed with high-quality components and is rigorously tested to ensure that it meets stringent standards. This helps to ensure that the module will continue to perform optimally, even in harsh networking environments.
Troubleshooting tips for common issues
- Connectivity Issues: If you are facing issues with connectivity, make sure the cable you are using is supported by the GLC-FE-100BX-D transceiver. Check the link status, if it’s down, restart the switch or router.
- Link Flapping: If the link keeps going up and down, it could be due to a fault in the cable or transceiver. Check the cable for any signs of physical damage and replace it if necessary.
- Inconsistent Speed: If the speed of the link is not consistent, check the configuration of both the switch and router to make sure the correct speed is set. If the configuration is correct, the issue could be due to an internal hardware failure in the transceiver.
- Interference: Interference from other devices or environmental factors such as electromagnetic interference can cause connectivity issues. To resolve this, relocate the transceiver away from the source of interference.
- Power Fluctuations: Power fluctuations can cause the transceiver to stop functioning properly. Make sure the switch or router has a stable power supply and consider using a battery backup system to prevent power fluctuations.
- Firmware Update: The firmware of the transceiver can become outdated over time and cause connectivity issues. To resolve this, update the firmware to the latest version using the manufacturer’s recommended method.
- SFP Mismatch: The GLC-FE-100BX-D transceiver is designed to work with specific devices. If the transceiver is not compatible with the device, it will not function properly. Check the compatibility of the transceiver before installation.
- Loose Connections: If the connections between the transceiver and the device are loose, the link may not function properly. Check the connections and tighten them if necessary.
General Information
- Manufacturer: Cisco Systems, Inc
- MPN: GLC-FE-100BX-DProduct Name: 100Base-BX10 SFP Transceiver
- Product Type: SFPS
- SKU: GLC-FE-100BX-D
Technical Information
- Application/Usage: Data Networking
Dimensions & Weight
- Width 0.5 Inch
- Depth 2.2 Inch
- Height 0.3 Inch
Interfaces/Ports
- Interfaces/Ports: 1 x 100Base-BX10
- Interfaces/Ports Details: 1 x LC 100Base-BX10
Performance
- Connectivity Media Single-mode Fiber 100Base-BX10
- Data Transfer Rate: 100 Mbps Fast Ethernet
Miscellaneous
- Additional Information-
- Distance: 10 km
- Wavelength: 1550 nm
