Description
Performance and Scalability
The NCS2K-MF10-6RU is a mechanical frame chassis from Cisco Systems designed for use with their NCS 2000 Series routers. This chassis has a capacity of 10 line cards and supports 6RU (10.75 inches) of height.
In terms of performance, the chassis is designed to support the processing and routing capabilities of the NCS 2000 Series routers, providing high-speed connectivity and data transfer capabilities. The scalability of the NCS2K-MF10-6RU allows for the addition of line cards as network demands grow, allowing for expansion as needed.
It is important to note that the actual performance and scalability of the NCS2K-MF10-6RU will depend on the line cards used and the specific deployment scenario. It is recommended to consult with a Cisco Systems representative to determine the best solution for your network requirements.
Chassis Compartments and Ports
The NCS2K-MF10-6RU Cisco Passive Unit Mechanical Frame Chassis is a 6-Rack Unit (RU) high passive mechanical frame that provides a structural base and cable management solution for Cisco Network Convergence System 2000 (NCS2K) series routers. The chassis has several compartments and ports that serve different functions. These are:
- Front Panel Compartments – The front panel of the NCS2K-MF10-6RU contains two compartments for installing the route switch processors (RSPs) and the fabric cards. The RSP compartment is located at the top, and the fabric card compartment is located at the bottom.
- Rear Panel Ports – The rear panel of the NCS2K-MF10-6RU contains several ports that allow the connection of power, fan, and signal cables to the installed components. The ports include two power supply ports, eight fan ports, and two signal ports.
- Cable Management System – The chassis has a cable management system that helps organize and secure the cables within the frame. The cable management system consists of cable trays, cable clamps, and cable ties.
- Airflow Vents – The NCS2K-MF10-6RU has airflow vents on both the front and rear panels that provide air circulation to cool the installed components.
- Grounding Lugs – The chassis has grounding lugs located on the front and rear panels that provide a secure grounding point for the installed components.
Power and Cooling Considerations
The NCS2K-MF10-6RU Cisco Passive Unit Mechanical Frame Chassis is designed for use in data centers and other demanding environments where high-density networking solutions are required. When deploying this device, it’s essential to consider the power and cooling requirements to ensure smooth and efficient operation.
Power Requirements: The NCS2K-MF10-6RU is designed to be powered through a single power supply unit. This power supply unit provides the necessary voltage and current to support the devices within the mechanical frame chassis. The power supply unit must be compatible with the input voltage range of the device and must have sufficient capacity to support the combined power requirements of all devices within the mechanical frame chassis.
Cooling Requirements: The NCS2K-MF10-6RU is designed to be cooled by a high-density cooling solution. This cooling solution must be capable of removing the heat generated by the devices within the mechanical frame chassis. The cooling solution must be compatible with the mechanical frame chassis and must be installed in accordance with the manufacturer’s guidelines. To ensure efficient cooling, it’s recommended to maintain proper airflow within the data center and to install the mechanical frame chassis in a location that provides adequate ventilation.
In conclusion, when deploying the NCS2K-MF10-6RU Cisco Passive Unit Mechanical Frame Chassis, it’s essential to consider the power and cooling requirements to ensure smooth and efficient operation. This includes selecting a compatible power supply unit and cooling solution, as well as installing the mechanical frame chassis in a location that provides adequate ventilation.
Product Specifications:
- Manufacturer: Cisco Systems, Inc
- Manufacturer Part Number: NCS2K-MF10-6RU
- Type: Networking
- Sub-Type: Network Accessories
- Brand Name: Cisco
- Product Model: 15454
- Device Type: Passive Unit Mechanical Frame Chassis
- Product Name: 8 Mechanical Frame for Passive Units, 10 Slots with USB Hub, 6 RU
- Environmentally Friendly: Yes
Physical Characteristics:
- Form Factor: Rack-mountable
Miscellaneous:
- Application/Usage: Passive Patch Panel Module
- Compatibility: Cisco Network Convergence System 2000 Series Passive Patch Panel Modules
